Never Miss a Deal.

Do not work on thicker, shielded, CAT 6 cable. These strain relief boots are too small.

PROS: Nice blue color

CONS: Does not fit on PID 8093 Cat 6 Bulk Bare Copper Ethernet Network Cable STP, Solid, In-Wall Rated (CMG), 550MHz, 24AWG - Blue

Cannot be used for PID 8039 - Cat6 Bulk Bare Copper Ethernet Network Cable STP, Solid, In-Wall Rated (CMG), 550MHz, 24AWG.

PROS: Good for thinner cables

CONS: Doesn't work for some thicker Cat6 cables

These worked well. They are not made for thicker cable like 24awg - use that cable for punching down in walls and patch panels. Get some smaller wire for patch cables!

I purchased these to go with Monoprice PID 880 (1000FT 24AWG Cat5e 350MHz UTP Solid, Riser Rated (CMR), Bulk Ethernet Bare Copper Cable - Blue) and PID 7245 (RJ-45 MODULAR PLUGS RJ45 - 100 PACK FOR SOLID). They are sort of big when sliding them around the RJ45 end. While they don't feel like they'll just slip off on their own, they're definitely easy to slide off after setting them. I tried gluing them on but that was a disaster so we just ended up leaving them on the ends and hope they don't slip off.

PROS: They feel high in quality

They technically do what they're supposed to do

CONS: Too large for RJ-45 MODULAR PLUGS RJ45 - 100 PACK FOR SOLID

Slide off easily

When I installed these on some cat5e cabling, they slide off very easily. They also cover up too much of the RJ-45 connector. You have to pull the boot back to fully insert the cable into the device.

PROS: They do what they are designed to do.

CONS: Seem to be too big

Useing to connect computer to ps3 @ 72 ft away,Works flawlessly all products were put together with no problems,need to just pay attention to what you are doing

PROS: All,the best at a low price,Qualityand you can't beat anywhere

CONS: none

Works Great and does exactly what its supposed to do.

5/5

PROS: Good quality product

CONS: NONE

5/5

PROS: Work well, good fit & finish

Seems like great quality, just be aware of doesn't fit around shielded, solid wire Cat6 cable. (Very thick wire!)

There are many people who say this doesn't work/fit with Monoprice's own CAT6 cable, while it was a bit snug on CAT6 it feels really secure! I used a couple of these on CAT5e cables, it fits CAT5e, but it doesn't feel that secure.

TL;DR:
-Great value and price for CAT6
-Make sure to get 2 packs per 100 connectors.

Work perfectly for my patch cables, would recommend.

PROS: Amazing quality, great price. Highly recommend.

CONS: None

Great for patch cables, look good, protect the crimp.

PROS: High quality, no complaints.

CONS: none.

Great item for the cost, will continue to purchase as needed.

5/5

PROS: Works perfectly and makes you cable look like a store bought.

CONS: None

The work as describe and cover the cat6 connector but they are not the same color blue as the blue cat6 cable.

PROS: They fit.

CONS: They are not the small color blue as the cat6 cable MonoPrice sells.

Very pleased with these boots. Well made, flexible and good quality.

I don't know what else you'd want

PROS: It fits
It's blue

CONS: you might forget to put it on before getting the wires all set up

works just how we would like it to on our cables, makes our runs look great as well.

PROS: Fits snug on Cat6 cable

CONS: little loose on Cat5 Cable

My cables look so much more professional

PROS: Looks goods. Fits well. Strong

CONS: None

Great, cheap, product!

I would highly recommend this product and would it buy again!

PROS: Great product, received quickly.

CONS: None.

great cable, gets the job done.

PROS: great cable, gets the job done.

CONS: none.

5/5

PROS: nice fit

Bought for cat5e and fit perfectly. The colors look great and the price is very reasonable. Would definitely recommend.

Bought several color boots, They all are made of soft rubber unlike some boots which are hard that makes it difficult to disconnect a cable.

Not really much to say.. they're cheap and they do the job and have good color reproduction.
Can't complain.

PROS: price
soft and easy to depress plug tab

CONS: none

These are nice pieces, they work well, but they were too small for my cables. I ordered some Cat6a Solid wire and ended up scrapping the idea of using these relief widgets - the cable was much thicker than the opening on the boot. Also, the cables I was running were being installed in the wall, so it's not like they're going to be inserted and removed dozens of times.

I decided to keep them, since I have several network cables with broken RJ45 connectors, and I thought it would be a fun project to restore the ends instead of buying new cable. These boots will work nicely there.

PROS: Right price
Firm plastic
Fits over my RJ45

CONS: Doesn't work with really thick Cat6a Solid cable
Not exact color match, but not a dealbreaker

Pretty tight for the 23 AWG Cat6 cable I ordered (PID 13675), but it got on there and isn't going to slip around, at least.

Overall, it's not bad for the price.

PROS: Great for protecting your ethernet connector

CONS: The plastic could have been a little bit more rubbery and more flexible. A lot of times when you push the jacket in you end up pushing the tab on the connector as well making it come off.

I ended up not using them on most of my cables (they are in a wiring closet anyways). However the price couldn't be better :)

CONS: Sticks out a little too far toward the port, which means that the jack doesn't always 'click' into place correctly without manually pulling the boot back a little, which causes it to slide down the cable.

The Strain Relief Boots look well made and they and I will update my review when I use them. My issue is that i have only received 49 in a bag out of 50 and if your plan was to make 25 cables one of them is going to be missing a boot.

PROS: solid product

CONS: only 49 in the bag

They work fine but really dont serve a purpose besides color coating multible cables.

PROS: Work good.

CONS: Dont need if you do not need to color coat a bunch of wires.