If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number 1 (877) 271-2592.
    
    Monoprice Cat6 RJ45 Toolless Twist Lever 180-Degree Keystone
    Product # 15703
    $1.69
    Color:
    black white - selected
    In Stock This item should ship tomorrow (9/24/2018) if ordered within 19 hours 34 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $1.69
    Qty: 2-9 $1.66
    Qty: 10-19 $1.62
    Qty: 20-49 $1.59
    Qty: 50+ $1.52

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    ADVERTISEMENT

    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 3 questions Browse 3 questions and 13 answers
    What Faceplates do these fit into?! ... I can't for the life of me get these to snap into any of the Faceplates I've tried. The bottom notch isn't wide enough.
    A shopper on Jan 4, 2018
    BEST ANSWER: I used these (Construct Pro 3-Port Decorative Strap), but I would think any standard strap would work. I do remember that I had to place one side in first and then muscle the other side in to make it clip in place, but it wasn't terribly difficult. I did have to space the two apart with a coax in the middle slot because these two next to each other wouldn't fit (or at least it was very tight). Good luck.
    Is there a pin out for these or an installation video?
    A shopper on Jun 2, 2017
    BEST ANSWER: It's color coded on the sides. Look at the pic. Blue square = solid blue wire, Blue triangle = blue/white wire, etc. Easy peasy :)
    Are these able to be mounted side by side in wallplates?
    A shopper on Nov 29, 2016
    BEST ANSWER: Hello, thank you for your question. Yes these keystone will mount side by side with no issues. I hope this helps, and of course if you have any more questions feel free to contact us!
    4.6 / 5.0
    18 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    15
    1
    1
    0
    1
    Doesn't fit in keystone outlets
    The toolless portion of this jack is great, it was easy to use and very secure. However, it would not fit in any of the plates I bought from monoprice, amazon, or the big box stores. I had to use my exacto knife to shave off slivers of the plates so the jack would fit securely. I used 12, 6, 4, 3, and 1 plates for use with these and it didn't fit into any of them. I was able to get them both side by side and vertical in all of the plates, but it is a tight fit.
    May 11, 2017
    Purchased
    1 year ago
    pretty awesome
    I bought four different toolest keystones to try out to see which ones I like the most for a future patch panel. Once I figured out how to use the silly things, they were fairly simple. There was no instructions, but I eventually figured it out on my ownew without a Google search. These ones are really cool and are my favorite of the four different ones that I purchased. These have a twist locking system that works really really well. Not only that but the little piece can only go on one way, so that was very convenient! These are also small and sturdy and well made. I will be ordering 47 of these In the future. Want to help me out Monoprice? : )

    PROS: Sturdy, twist locking, simple

    CONS: No colors to choose from, but not a huge deal.
    August 26, 2016
    Very nice
    Easy to use. No punch tool needed. Run cable in, line up wires and snap into place by hand, then join with mating connector half, and twist the lever. Cut off extra wire. Done. Not sure there is really any time savings vs punch down type. Although I do like how securely the cable snugs up into the connector end (vs loose fit in punch down type connectors I've previously used). These also do fit side-by-side in a keystone wall plate. Had no problem with the 4-hole p/n 6731 Wall Plate. But did have an issue with the 12-hole p/n 6837 2-Gang Wall Plate. The upper & lower rails on that wall plate, where the keystone sits in, were too fat for these connectors. So I had to shave the rails down with a razor blade. Then the keystones snapped in securely. Not sure if it's an issue with the 12-hole wall plate or this keystone. But again, had no problem with them snapping right into the 4-hole wall plate. So 4 stars for that hassle. However, I'd buy these again.
    March 2, 2017
    Purchased
    1 year ago
    Won't fit in Monoprice 2 gang, 12 hole wall plate
    These will not fit in the Monoprice 2 gang, 12 hole keystone wall plate. I'm not sure if the problem is with the plate or these jacks, but Monoprice should clearly state what keystone plates and jacks work with each other.
    May 20, 2018
    Purchased
    4 months ago
    Fast and Easy
    Works great. Had no trouble snapping into the 1 hole wall plates bought from Monoprice. Assembles easily. Only problem I had was that the RJ45 connector I used on on the opposite end of the cable was built backwards, so none of my colors lined up. Once I realized my mistake, swapped wires around, it worked fine. Hope that gives someone a laugh. :)
    December 2, 2017
    Purchased
    11 months ago
    Super Easy to Use
    Easiest rj45 termination I've found. No problem installing in ConstructPro Keystone strap.
    July 20, 2018
    Purchased
    7 months ago
    Efficient and easy to use
    It was really easy to get all of the wires aligned and ready, and the twist finish was perfect. Clipped the excess wire with a small pair of dikes, and pushed it back into the pole. No problem. Made the job easy without punch tool.
    February 27, 2018
    Purchased
    7 months ago
    Works very well
    Very convenient connector, snaps right in place all the time.
    December 15, 2016
    Purchased
    1 year ago
    Super easy to install
    I was worried it was going to be hard to twist to pierce the wires, but the twisting action required almost zero force while crimping the wires. Taking it apart it appeared that it had pierced all the wires enough to make contact. I've only done one so far but I'll be ordering more and I'll submit another review then. Also, the wires divide into the rear cap and each wire "snaps" into place holding them until you assemble it. Then you just cut off the excess.
    March 9, 2017
    Purchased
    1 year ago
    Easy to use, worked perfectly on the first try
    Worked perfectly for terminating some cables in a tight space that did not have room to use a punchdown. Of the 6 keystone jacks terminated, all 6 tested and worked perfectly on the first try. Fast and easy to line up the wires and clamp. These keystones also fit perfectly into Monoprice's single port wall plate. Will definitely use these for all RJ45 projects going forward.
    September 21, 2018
    Purchased
    1 month ago

    ADVERTISEMENT