If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number 1 (877) 271-2592.
    Monoprice RJ-45/RJ-11 Modular Crimping Tool
    Product # 8139
    In Stock This item should ship tomorrow (9/21/2018) if ordered within 23 hours

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $15.84
    Qty: 2-9 $15.52
    Qty: 10-19 $15.21
    Qty: 20-49 $14.89
    Qty: 50+ $14.26

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business


    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    4.4 / 5.0
    15 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    Professional Crimp Tool
    This crimp tool will last for thousands of terminations of professional quality when used and cared for properly.

    PROS: This unit is identical in parts and manufacture to the Ideal Telemaster crimp tool I bought many years ago, and finally wore out after literally thousands of crimps. This unit is also about 1/3 of the price I paid for the Telemaster.

    CONS: None, really, but it would be even better with a ratcheting crimp.
    October 23, 2011
    Good Crimper
    Works as described cuts crimps does just about everything but install the connector for you easy on the hand has good hand grips the feel is just right very light weight easy to handle
    January 21, 2017
    1 year ago
    Great Product
    Product was 1/2 the cost of well known brands works just as well, great item, the only issus i have it the closure system does take a bit to get use to.
    March 13, 2013
    Good for the DIY'er
    This isn't as nice as the $50 one that I used to have. But for the price it is fine for people who use it 3-4 times a year.
    August 25, 2013
    I found that the stripping blade on this tool often cut past the outer jacket on 24AWG stranded Cat5e if I just squeezed the handle until the stop engaged. This was of course annoying because every time that happened I had to trim the compromised portion of the cable and start over. I found I had to lightly squeeze the handle and run the blade around the cable several times, which causes its own set of problems (i.e. incomplete or jagged cuts in the jacket). The stop is a piece of plastic which is held on by two screws. It may be possible to reposition the stop so that it works properly, but I only use this tool every few months so it's not worth the trouble for me.

    PROS: Crimps well

    CONS: Doesn't strip Cat5 jacket that well
    March 17, 2015
    crimping tool
    Tool works well but the cutter is a little flimsy. If not aligned properly it will bend the wire tips when cutting and the tips will need to be re-trimmed.
    July 18, 2017
    1 year ago
    It Crimps!
    The hinge has some lateral play to it. Enough to miss the anvil on the cutter if you don't squeeze straight down on the handles. It also takes a strong hand (or two) to crimp RJ45. My wife couldn't make a full crimp using both hands. I had to go behind her and give 'em a second squeeze to make contact with all eight strands.
    August 5, 2017
    1 year ago
    thrifty price for intent but short on basic performance needed

    PROS: Price is right for an RJ-45 crimper otherwise not readily found for 2-3 x the cost. With extra work and care can be used to do the job.

    CONS: Sadly, Shortfalls are probably why the price is low. It was a way to sell off a product that didn't make the grade in design and manufacturing. As confirmed by cons of other reviewers, the following defects are evident :1. Does not crimp well & you have to squeeze hard to get the clamp to work. 2. The stripper cuts the wires inside the casing so you have to be careful when cutting. 3. The cable stop for the stripper is too far past the blade so it strips too much of the covering sheath. You have to trim and re-cut the wires to correct length.
    March 15, 2015
    Works Very Good.
    This is a great tool to have for cutting, stripping, and crimping connectors onto rj11 cable. The only con is that the cable stop for the stripper is to far past the blade so it strips to long of the insulation off the wire. Then the grey portion of the wire is sticking out of the connector so after i strip it I have to use the cutter to make the colored wires shorter so the insulation can be crimped in the connector. Overall though these are very good at a much cheaper price than the local stores.

    PROS: Strips, Cuts, and Crimps rj11 cable and connectors very well. Great Price!

    CONS: Strips too much length off of wire.
    January 20, 2015
    Works great i have one just like it at work and both are idenitcal and im sure i got this one way cheaper than the one at work.

    Great product over all.

    PROS: Great! Works like a charm.

    CONS: No Cons
    April 13, 2012