If you are visually impaired and are having difficulty navigating this site, please call our Customer Support line via our toll free number 1 (877) 271-2592.
    Easy Mount Low Voltage Cable Recessed Wall Plate - White
    Product # 6625
    Color: White
    In Stock This item should ship tomorrow (1/24/2018) if ordered within 20 hours 2 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $3.00
    Qty: 2-9 $2.91
    Qty: 10-19 $2.82
    Qty: 20-49 $2.73
    Qty: 50+ $2.64

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business


    Easy Mount Low Voltage Cable Recessed Wall Plate - White

    Monoprice is proud to carry a line of low voltage cable pass through wall plates with an "easy mount" design that does not require a work ring or low voltage gang box inside of the wall for installation. The wall plates feature a unique design with tabs on the sides that fasten tightly against the back of a drywall mounting surface providing a clean looking installation without the hassle of installing a gang box or work ring. The design also allows for additional versatility as the wall plates can either be installed vertically or horizontally on the wall.


    Recessed low voltage pass through wall plates give your installation a finished appearance but allows you the versatility of using the cable types of your choice. Multiple lines can be passed through a single plate allowing you to mix and match, eliminating the need to have multiple plates spread out across your wall.


    With these new plates you can install low voltage cables behind your flat panel TV, your amplifier, or other audio/video devices with ease.
    Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D)
    Cable pass through dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D)
    Maximum wall thickness for installation: 1 inch
    Minimum wall thickness for installation: .25 inch 
    *The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.

    Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D)

    Cable pass through dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D)
    Maximum wall thickness for installation: 1 inch
    Minimum wall thickness for installation: .25 inch
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    Can these be installed on a standard old box bracket?
    Christopher P on Mar 30, 2017
    BEST ANSWER: Thank you for your question. These recessed wall plates would not require the use of a gang box or work ring. You would simply cut an opening to fit the dimensions of the box and when you tighten the screws of the wall plate, the plastic wing brackets will hold it to the dry wall. Just be sure the minimum wall thickness is at least .25".
    4.5 / 5.0
    54 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    Decided to test these out for my LCD flat panel. I had it professionally installed (Never Again), could have saved a lot with the knowledge I've gained. Anyway, I use these to replace the cheap ones I thought were high quality from my install. These wall plates are a great alternative to having to buy an old work electrical box and a faceplate. The biggest advantage in using this vs. buying the work box is that you don't have to cut it up. Simply run your cords and mount in the wall and screw in to secure. It's like a faceplate/workbox combo. In addition the scoop can be removed for running larger cables, connectors, etc. It's a straight forward install and the product is of great quality. Instructions are included and a template also. I was able to fit two HDMI, component, vga, cat5, and a coax. Again, great idea and good buy!
    February 27, 2010
    Great way to hide wires.
    These things are great, and super easy to install. I installed one plate behind a flat screen TV for that wire-free appearance, and dropped the cables down 3 feet to the other plate. (Shhh, don't tell any electricians that I put the power cable in there too, though I used a heavy duty extension cord o) ). I decided to add another cable a few days later, and it was a painless procedure to undo a plate to help get the cable through. I was able to fit an extension cord, an hdmi cable, the coax cable, a flat network cable, and a set of 3 RCA wires. They come with a paper template to make the drywall opening. A box cutter will work, just make sure no studs are in the way!
    July 6, 2010
    The name says it all, "Easy Mount"
    This is a very good quality and easy to install wall plate. The entire unit comes with the faceplate and the mounting bracket to secure it to your drywall so you don't need to buy a separate bracket.

    Installation was as easy as cutting the drywall opening, inserting the unit into the opening and tightening the two screws, less than a minute job.

    The large opening allows for all types of A/V cables without having to worry about signal deterioration by introducing additional connectors on each faceplate. Your cable connects your TV straight to the A/V source. Unless you have some type of signal booster (which I doubt for such short distance, quality doesn't get any better than point-to-point connection regardless how great or how much you paid for those "gold-plated" connectors.

    PROS: Bracket and faceplate all in one unit. Cheap, easy to mount. Fits all types of A/V cables

    CONS: Mounting hole template was smaller than the actual opening size required. No big deal since it was easy to fix.
    January 11, 2011
    My wife loved the look, after hiding the xbox360, wii, surround sound, blu ray player, and vcr cables(including power for the tv) in the wall instead of hanging down from our wall mounted tv.

    PROS: Worked very nice in hiding cables in the wall.
    August 23, 2011
    breaks easily
    broke very easily, during install. ended up gluing them in.

    PROS: good idea

    CONS: flimsy plastic tiger grips
    April 16, 2011
    Works as expected, great value for the price
    February 27, 2014
    Looks Clean!
    Perfect for running some cables in and out of the wall. Cleans it up nicely. Easy Install.
    November 2, 2012
    Wall plates to tidy up entertainment area.
    Works perfectly in hiding all of your AV cables, absolutely love them!
    November 28, 2017
    2 months ago
    Clean, easy, nice looking
    This box looks just like a regular wall plate, but the white behind the wires gives it a more finished look. Nicer than what our electrician rigged up. This was easy to install and tighten, and because it is horizontal, it has a low profile behind our cable box. Great price, too.
    March 29, 2017
    11 months ago
    Works great prefect opening size. Need to order a few more of these.
    November 27, 2011

    Related Categories


    In Stock This item should ship tomorrow (1/24/2018) if ordered within 20 hours 2 minutes