Volume Pricing (Log In to see Member Pricing)
Blackbird 4K HDMI 2x4 Splitter and Switch
Why make everyone at your football party crowd around one or two HDMI® displays? You can run up to four High Speed displays with this Monoprice Switch/Splitter, so everyone can have a clear view of the action!
This device has two HDMI inputs and four HDMI outputs, so you can switch between two input source devices and send the signal simultaneously to four displays. No setup or special configuration is required, simply connect the input device(s) and output device(s), then start using it!
The unit also has a built in, automatically adjusting amplifier. This means that you can use longer than normal HDMI cables running to the inputs. The built-in amplifier will then regenerate the HDMI signal before sending it to the outputs. This lets you extend beyond the normal range (25 feet) for High Speed (1080p) signals.
The unit supports video at resolutions up to 4K@30Hz and high definition audio signals, such as DTS® Digital, Dolby®, DTS-HD Master Audio™, and Dolby TrueHD™, as well as standard LPCM stereo.
Note that you don't have to have two inputs and four outputs to use this device. You can use just the switching function if you only have one display or just the splitter function if you have only one input.
IMPORTANT: This is NOT a Matrix device and thus will not allow simultaneous use of each input source on different output displays. To see various Matrix devices, please click here.
Note: Monoprice strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this switch/splitter, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.
|Input Power||5 VDC, 1A|
|AC Adapter Input Power||100 ~ 240 VAC, 50/60 Hz|
|Operating Temperature||+32 ~ +104°F (0 ~ +40°C)|
|Storage Temperature||-4 ~ +140°F (-20 ~ +60°C)|
|Operating Humidity||20 ~ 90% RH, non-condensing|
|Dimensions||3.3" x 7.6" x 1.0" (85 x 192 x 26 mm)|
|Weight||15.9 oz. (450g)|
|Regulatory Compliance||CE, FCC, UL certified|
- Quick Start Guide (Jun 2, 2016)
Blackbird™ is a trademark of Monoprice Inc.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™ and DTS-HD Master Audio™ are trademarks of DTS, Inc.
Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby TrueHD™ is a trademark of Dolby Laboratories.
Questions and Answers
Same image on both screen
My only gripe (which it does clearly state in the manual) is you must shut ALL devices totally down (unplug or hit breaker) or the device on initial start-up will not work. Once the plugs are in the unit however it has worked perfectly no matter what is turned on first or last.
1 year ago
3 months ago
1 month ago
1 month ago
2 months ago
3 months ago