Volume Pricing (Log In to see Member Pricing)
Cat6A Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, STP, Pure Bare Copper Wire, 10G, 26AWG, 50ft, Blue
|Input DDC Signal||5 volts p-p (TTL)|
|Video Amplifier Bandwidth||165 MHz / 1.65 Gbps|
|Vertical Frequency Range||50/60 Hz|
|Supported Resolutions||480i (SD), 480p, 576i, 576p, 720p, 1080i, 1080p|
|1080p Transmission Distance using Cat6||50 meters (164 feet)|
|Amplifier External Power Supply||5 VDC, 4A|
|Receiver External Power Supplies||5 VDC, 2A|
|Operating Temperature Range||0°C to +70°C|
|Operating Humidity Range||10% to 85% RH (no condensation)|
|Storage Temperature Range||-10°C to +80°C|
|Storage Humidity Range||5% to 90% RH (no condensation)|
|Amplifier Dimensions||17 3/8" wide wide, 8 1/4" deep, 2 3/16" high|
|Receiver Dimensions||3 15/16" wide, 2 19/32" deep, 15/16" high|
|Amplifier Weight||2218 gm|
|Amplifier Weight||385 gm|
|Regulatory Compliance||FCC, CE, RoHS, UL|
Included in the Box:
- 1x HDMI® Amplifier Splitter unit (1x8)
- 8x Receiver units
- 1x 4A AC adapter with 44" cord
- 8x 2A AC adapters with 44" cord
- 16x Mounting brackets
- 32x Mounting screws
- 1x User Manual
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Questions and Answers
Should you require additional assistance, please reach out to our technical support team with a detailed question via any of the methods available here:
Our knowledgeable Technical Support staff would be more than happy to assist. Thank you
I've had my 8160 splitter for 2-3 years. Then, ports 2, 6 & 8 stopped working recently. I limped along by moving important TVs to working ports, but thought I would eventually have to replace the splitter. By reading these reviews, I began to wonder if the power supply could be the culprit. I purchased a 5V, 6A adapter online with 5.5mm x 2.5mm coaxial plug (center positive). With new adapter, all ports on the splitter now work. To be certain, I tried the old adapter again, and same ports fail. PS: I found my replacement adapter online "5V, 363511". It brought my unit back to 100%.
Since they are not provided, I made some sheetmetal brackets to mount the receiver to my HT & network distribution board (plywood) mounted on the basement wall.
I purchased a bunch of items from Monoprice for my HT updates during my home remodel. Everything worked great. One minor damage issue, but Monoprice took care of it. Good vendor.
PROS: Great splitter - no issues with sync - never needs reset.
TVs on and off plug and unplug HDMI syncs back up. No HDCP issues in my setup.
My installation works well with 8597 UTP CAT6.
Compatible with all my HDTVs: 2006 Samsung, 2013 Samsung, 2008 Visio.
Allows me to feed HDTV signal from centrally located DVR to multiple TVs. I use multiple UHF remotes to control the DVR.
CONS: If Monoprice shipped a more robust power supply with this splitter, their customers would be happier. Reviews indicate issues can crop up with some units (including mine) after a year or two of service. Hopefully, swapping out the power supply can fix most, if not all, of these issues.
It would be great if the main unit fed power to the 8 HDMI receivers through the CAT6 requiring power adapters for all 8 receivers is a pain, but not a deal-killer.
As others have mentioned, including some main unit mounting brackets would be a real plus.
After mine failed, exhibiting switching between picture and no signal and then no signal at all, I tried to replace just the splitter but Monoprice will only sell the whole new kit with another 8 receivers and power supplies. I use this in my business and needed it back up working ASAP, so I went the whole new kit route. On receiving I pulled just the new power adapter out first and hooked it to the old splitter. Immediately it all worked fine. Not sure if Mono sells a 5V 4A Power adapter for this box but a lot cheaper than a whole kit. Guess I now have a spare 1x8 splitter and 8 spare receivers. Try the power adapter first.
PROS: Worked fine for 2 years.
CONS: Cannot replace without buying whole new kit.
One added note- I noticed that there are mounting holes on the main chassis for rack-mount brackets, but there are not brackets. I'd gladly pay a few bucks more if the brackets were included. As it's presently sold, I either have to add a shelf to accommodate it in the rack, or build the brackets myself.
PROS: Excellent deal for the money. It performs well.
CONS: Replacement parts not available
PROS: Easy to set up and use
CONS: Replacement parts are impossible due to the way we purchase and the way monoprice lists us. A powersupply went bad and could not get a replacement, since they are cheap I just went out and bought one.
PROS: Great price, works well, easy to install.
PROS: Sends a high def 1080p signal over long CAT-5e runs with no loss of quality!
CONS: Two of the 8 receivers were DOA.
Hopefully Monoprice reads this and makes the changes with this product to prevent future issues.
PROS: Works great with CAT-6 (have not tried with CAT-5e). I currently only use 2-3 TVs but needed the option to add more down the road. This unit allows me to use one cable box and feed all the TVs without an additional monthly cost from the cable provider.
CONS: The power supply is insufficient. Rack mount?
PROS: Image quality over CAT 6 great, no issues with syncing multiple TV's, great price
CONS: 4 out of 5 went bad
I might buy another one!
1 year ago