Volume Pricing (Log In to see Member Pricing)
Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 100ft, Green
Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 100ft, Yellow
Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 100ft, Purple
1000FT Cat 6 Bulk Bare Copper Ethernet Network Cable UTP, Solid, In-Wall Rated, 550MHz, 24AWG - Black
|Input DDC Signal||5 volts p-p (TTL)|
|Video Amplifier Bandwidth||165 MHz / 1.65 Gbps|
|Vertical Frequency Range||50/60 Hz|
|Supported Resolutions||480i (SD), 480p, 576i, 576p, 720p, 1080i, 1080p|
|External Power Supplies||5 VDC, 2A|
|Amplifier Power Consumption||10W|
|Receiver Power Consumption||5W|
|Operating Temperature Range||0°C to +70°C|
|Operating Humidity Range||10% to 85% RH (no condensation)|
|Storage Temperature Range||-10°C to +80°C|
|Storage Humidity Range||5% to 90% RH (no condensation)|
|Amplifier Dimensions||3 31/32" wide, 4" deep, 15/16" high|
|Receiver Dimensions||3 15/16" wide, 2 19/32" deep, 1" high|
|Amplifier Weight||285 gm|
|Amplifier Weight||385 gm|
|Regulatory Compliance||FCC, CE, RoHS, UL|
Included in the Box:
- 1x HDMI® Amplifier Splitter
- 2x Extender receivers
- 3x AC adapter with 44" cord
- 6x Mounting bracket
- 12x Mounting screws
- 1x User manual
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Questions and Answers
Otherwise it's possible, just not recommended due to possible degradation. I'd personally do a 2nd active extender v.s. a 40ft HDMI cable.
This may work better for your situation if you have IR remote controls only. Be sure to read the specs to make sure it fits your needs: http://www.monoprice.com/product?p_id=15521#QA
PROS: While it works, the product seems effective.
CONS: Very poor reliability
PROS: Easy to setup
No settings to mess with
Plug and Play
CONS: Wish the HDMI and Ethernet plug where on the same side.
Note: I used 1 shielded Cat5e cable for each extender box at about 100'
PROS: Product IS HDCP compliant (chatted with tech support as I couldn't find it in the description.
Good price point
Solves problem of getting HDMI signal over an extended distance
CONS: Doesn't like standard CAT6 jacks in the signal chain
Anyway, I will buy this splitter again or the larger version.
PROS: It works on 75ft cat6
CONS: receiver units need power
Only two ports
PROS: plug and play
But I have no complaints about this unit and was very happy with how easy it was to connect and start using. Even my one con of requiring a separate power supply for each unit (the one splitter and two receivers) is not so much a problem as it is annoying. From my research I understand the HDMI splitters that only use power from the HDMI port do not work as well so I suppose the separate power supply for splitters will be a con for all splitters until someone comes up with a better splitter.
PROS: Easy to setup
CONS: Each device requires a separate power supply
PROS: Works just as advertised. I am using a75' Cat6 cable. Great solution to doubling your HDMI signal from an older DISH satellite receiver that only feeds hi def to one TV.
PROS: Shipped overnight same day it was ordered, arrived next morning.
Works as advertised - able to add HDTV in another room to my DirecTV DVR.
CONS: I didn't check the specs enough to realize that this does not support 3D. With it I get a message on my 3D Channels that thinks my TV isn't a 3D type, so they are blocked.
Changing channels with my DVR seems to take twice as long to show on TV as before, and the sound begins until about one second after picture.
PROS: Supports 5.1 Dolby Digital Surround sound.
Supports 1080p resolution.
Doubles the output.
Can output to two separate sources simultaneously with no loss in quality.
Plug and Play.
CONS: Works with only one source.
All three must be plugged in to work.
No USB power source.
Plugs are huge.