Cat6 Shielded Stranded - 100pcs bag
    Product # 7301
    Cat6 Shielded Stranded - 100pcs bag
    Product # 7301
    $10.92
    Quantity:
    In Stock This item will ship on 5/1/2017 if ordered within 1 days 17 hours 37 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $10.92
    Qty: 2-9 $10.24
    Qty: 10-19 $9.56
    Qty: 20-49 $8.87
    Qty: 50+ $8.19

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Cat6 Shielded Stranded - 100pcs bag

    Sheilded RJ45 connectors for Cat6 Stranded cables.
    Cat-6 connectors are made to higher standards that help reduce noise caused by crosstalk and system noise.  These connectors feature an metal overly to provide shielding from external interferance.
    Crimp on RJ45 connectors, inserts aren't required.
    Metallic outer shell for reduced signal interferance. 
    Gold plated contacts
    Clear plastic inner housing.
    For Stranded wire cables.
     

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, improvements and physical design changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    will these work on Cat 5E cable?
    A shopper on Jan 26, 2017
    BEST ANSWER: Yep. Used them on both.
    2.6 / 5.0
    37 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    9
    3
    7
    1
    17
    These suck!
    I have been installing cabling for 15 years. In a pinch I bought these ends from Monoprice with some of their STP cabling. Bad bad bad. The cabling labeled as 24 AWG when in actuality it is more like 23 AWG. The ends are not made for anything larger than 26 AWG, from what I can tell. I was not able to get one cable to seat correctly. The cables would not make it far enough for the pins to make contact because the outer jacketing was way too thick for the open of the connector not to mention having the drain wire there!

    PROS: They look like good ends

    CONS: They aren't good ends
    October 21, 2011
    No inserts equals terrible
    Worthless when they don't come with the inserts. You will hate using these. Absolutely terrible and low end cheap. I love most Monoprice products, but this is terrible. Get rid of these Monoprice :(

    The "Installation guide" on this web page (http://www.monoprice.com/manual/How%20to%20-%20crimp%20RJ45%20w%20inserts.pdf) with this product shows the use of an insert. So silly me, I thought these would come with an insert, but they do not. Instead these are supposed to be "insertless." Trying to make cat6 cables without inserts is a real pain and I wish I never bought these and will likely throw them into the trash.

    PROS: cheap

    CONS: No inserts make these almost impossible to use.
    April 9, 2011
    Not too bad!
    These performed better than expected. My last set of Shielded RJ45 connectors were a pain to get installed as the wires would move around all over the place Inside the connector and just before I crimp. With these, they stay in place to a point where I can make a solid crimp. So far, I've made 4 cables and they are all registering Gigabit speeds, unlike my last set. Monoprice comes through again. Hopefully they will make a 50pack and/or a shielded set with Inserts as I'd like to try those out too in the future.

    PROS: -Wires stay in place
    -Shielded
    -All cables registering Gigabit Speed so far (using STP Cat6 from Monoprice)


    CONS: -Need to make one with Inserts
    -after crimping, it looks like the brass crimp that goes into the wires may slide, but I have yet to run into one
    March 15, 2011
    If you like manual labor, these are your plugs.
    The plugs are good quality and have shielding but can be difficult to crimp. The Cat6 stranded cable on Monoprice is slightly larger than the opening on the plug because of the shielding. It fits but you have to line the plastic spleen up diagonally to the plug and squish it a bit. Also don't over crimp the cables because the plastic tab would break when using the Cat 6 cable.

    If your used to making cables these plugs won't be a big problem. I have made about 30 cables so far with these plugs and it only takes me a minute or so to create each. However, I have had some less experienced people try to make some cables and they really struggled.

    PROS: Shielded plugs

    CONS: No inserts
    April 9, 2011
    Avoid these with PID 2271
    Above

    PROS: After you spend 10 minutes trying to get leads in proper order, anger is replaced with relief..that is until the next one.

    CONS: Not to be used with PID 2271 in my opinion, way too difficult to use.
    February 25, 2014
    Does not lock
    Unfortunately these are useless, a gentle breeze/kitten sneeze/car passing in a nearby county will leave you with cables laying on the floor instead of their port. This is my first and only negative review on a monoprice product, and I have been a loyal customer for years, this one is just a disappointment.

    PROS: They look nice, crimped without issue

    CONS: They will not lock in anything, including monoprice's own RJ45 female keystones, multiple NIC's, and multiple switches.
    September 8, 2015
    RJ-45 goodness
    I have used ridiculous amounts of these connectors. I have never had one fail or give me any issues. They are listed for stranded wire but I use them with solid wires and it's perfect! I have used Cat6 STP and UPT and both fit just fine.

    PROS: Much cheaper cost than anywhere else and they do job and do it very well.

    CONS: None.
    September 23, 2016
    would not recoommend
    These connectors neither make connection to the cable shield and at a real pig to put on with Cat6 cable. Much prefer cat 6 connectors with an insert and without a connection to the cable shield these are a waste of time.

    CONS: Really hard to fit with cat6 cable.
    November 16, 2014
    5/5
    I notice many complains on these connectors. I however did not have any issues with the connectors. They are in a staggerd pattern, which if you have not worked with cat connectors very long could take some time to get use to. I would recommend these, they work great!

    PROS: Shielded, looks and fits great
    February 18, 2014
    Great way to make your own cables
    These are awesome, but being shielded on 3 sides they make wire depth and color verification a little tricky. The locking tang isn't as rigid as I'd like (I don't get the sharp audible click), but it holds well. When you jam the spleen in and crimp, you'll get a very solid connector.

    PROS: Durable, professional, high quality

    CONS: The locking tang doesn't snap very loud and feels flimsy
    May 3, 2011

    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART