Cat6 Punch Down Keystone Jack - White
    Product # 5384
    $0.99
    Color: White
    In Stock This item should ship today (7/24/2017) if ordered within 8 hours 18 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $0.99
    Qty: 2-9 $0.94
    Qty: 10-19 $0.84
    Qty: 20-49 $0.81
    Qty: 50+ $0.79

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Cat6 Punch Down Keystone Jack - White

    High speed, Cat6 grade, easy to use, modular RJ45 Keystone jack. 110 type IDC. 90 degree connection. To be used with keystone wall plate or panel. Wiring diagram next to wire clips.
     

    Note that the width of the RJ45 keystones is such that two cannot be used side-by-side in the same wall-plate.



    Click the following link for an installation guide:http://www.monoprice.com/manual/How%20to%20-%20Punchdown%20keystones.pdf

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, improvements and physical design changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. 

     
    *The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 6 questions Browse 6 questions and 17 answers
    Do these support 10 gigabit over Cat6A?
    Gary L on Dec 5, 2016
    BEST ANSWER: Hello, since this is a simple passthrough it should support 10 gigabit accordingly. Just make sure the rest of your setup supports those speeds and it should work properly. I hope this helps and thank you for your question
    How is this really any different to a cat5e jack - both cat 5 & 6 have the same pin-out?
    Michael M on Dec 13, 2016
    BEST ANSWER: cat5, cat5e, and cat6 are all different standards with different wire gages, insulation material and cat6 has a riser spine in all versions. A cat6 jack can be used with 5 or 5e but in general they are meant for cat6 wire. thicker terminals for thicker wire so the wires may not stay terminated properly if there is a lot of movement. In my home I have some cat6 ports terminating cat5e wiring but it is used only because it's what I had on hand, in a place that isn't used often.

    if you can, use cat6 wire, terminals and ends. it is much better than 5e in the long term.
    Does this Punch Down Jack work fine with Solid Ethernet cables or just stranded?
    Mohammad M on Feb 23, 2017
    BEST ANSWER: Actually, I have never seen a jack for stranded. They make crimp on ends for stranded, but inside the wall cabling and terminations are always solid. If you must use stranded cable in the wall, look for a pass through plate or one that the RJ45 end clips in on the back and front.
    I bought the FLEXboot Series Cat6 24AWG UTP Ethernet Network Patch Cable. I ran through the wall and want to hook up to a Cat6 Punch Down Keystone Jack. would i cut it just like cutting strip it and use a punch down tool the same as when using a spool of ethernet?
    Jordan D on Jun 12, 2017
    Cat6 Punch Down Keystone Jack - White
    Cat6 Punch Down Keystone Jack - White
    FLEXboot Series Cat6 24AWG UTP Ethernet Network Patch Cable, 50ft Blue
    FLEXboot Series Cat6 24AWG UTP Ethernet Network Patch Cable, 50ft Blue
    BEST ANSWER: There is no difference in the cable than what's on a spool, just factory terminated instead of on a spool. Patch away.
    4.7 / 5.0
    256 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    216
    26
    7
    0
    7
    They work side-by-side for me
    With all the warnings that these would not fit side by side in a 4 or 6 hole plate, I figured I'd have to by a few of another brand to meet my needs on the one drop in my project that needed a 4-jack plate.



    The first thing I did when receiving these was try them out on the 4-hole plate. They work just fine, and do not bump into one another in that side-by-side setup. I think the complaint people have must be based on the super-narrow "Decora" plates (the width of a light switch), because these jacks worked fine with the standard plates I ordered from Monoprice.

    PROS: 1. Great price.

    2. They fit side by side in a 4 hole keystone plate (regular, single-gang plate sold by monoprice, NOT the skinny "light switch" decora plate)

    CONS: None so far, though I haven't "fluke tested" the connections.
    April 29, 2015
    Works Well
    These can be a little tricky to wire the first few times but once you get the hang of it it's pretty easy. I was even able to achieve good connections with stranded wire and a cheap punchdown tool from the hardware store.



    Just as a note, these will fit just fine side-by-side in the 4- and 6- hole Keystone wall plates sold by Monoprice. It's possible to get 6 of these on a wall plate the trick is to insert the ones at the top of the plate first and work your way down. Getting them out might be another problem hopefully not one I will have to encounter. Worst case you have to snap the plate and use a new one.

    PROS: Price, solid connection.

    CONS: None so far.
    August 8, 2014
    Good jack BUT...
    Wish they had more than 8 colors! (Leviton has 13 colors)

    PROS: Nice, cheap, great for non Decora style wall plates. (or up to 3 place max)

    CONS: These WILL NOT FIT side by side in the Decora style wall plates! (Of any manufacturer)
    If you need to put 2 side by side then you should use Leviton's jack, the Leviton keystone jack is .63" (5/8") and these are .75" (3/4") wide.
    October 31, 2010
    All tested good when done
    First time using these. Well definitely use these as my "preferred" choice. The only time I'll use a different type well be if I'm doing a 4 or 6 port wall plate. They don't fit next to each other. Great value. Every one passed testing, some runs were over 150 ft., no loss.
    Prompt shipping, no errors in quantity. Thanks Monoprice!

    PROS: Great for the price! Both "A" and "B" configurations clearly labeled. Every one passed testing after installation.

    CONS: Don't expect these to fit side-by-side in a 4 or 6 port keystone. They are too wide. I used these in a 2 and 3 port wall plate so was fine.
    April 24, 2012
    Great Product+
    I recently purchased this and other items to cable an office with about 95 network lines, jacks, both CAT5 and CAT6, all the hardware needed to hang, wallplates, keystone jacks, J-hooks, and patch panels. All the equipment I got from MonoPrice was excellent quality and installed with absolutely no failure.

    CONS: Wiring maps were sometimes different from similar product. Had to be on your toes to get them all right.
    September 20, 2012
    Works great, just not with 12-jack keystone plate
    Purchased these keystone jacks along with PID 6387, a 2-gang, 12-jack wallplate. The jacks are spaced too close together for the keystones to fit. You can pair side-by-side with other AV jacks like coax and RCA but not another RJ45.

    PROS: Works great, easy to punchdown

    CONS: Not much other than being too wide for the 12-jack wallplate.
    June 27, 2016
    5/5
    I installed a couple of these using a Monoprice punch-down tool without any problems. The tool doesn't manage to cut off the excess wire so I broke it off by bending it back and forth repeatedly. Once you get the hang of it, it's easy. The jacks fit into the two-hole Monoprice wall plates without problems.

    PROS: Work reliably.

    Easy to install once you get the hang of it.

    Includes zip-tie for strain-relief.

    CONS: Minor: no documentation included for how to choose between 568A vs 568B wiring, etc (but this is covered by the video above).
    July 8, 2014
    Price, Performance and Simplicity
    I actually used this Jack on a 30 foot Cat6 cable that I bougut from Monoprice that had connectors on both ends. Since I could not buy any (no-connector) Cat6 UTP from Monoprice in quantities less than 1000' I did it this way. I don't think I will ever need anywhere near 1000' in my lifetime. The cable was clearly marked TIA568B so I followed the color coding on the Jack for 568B. Worked like a charm first time. I am now streaming HD movies from my DVR in the Livingroom to my Laptop in my Home Office. Thank You Monoprice!

    PROS: Very easy to wire and worked perfectly the first time. The color coding for the TIA-568A abd B specs couldn't be more plain. I actually used this on a 30 foot Cat6 cable that I bougut from Monoprice that had connectors on both ends.

    CONS: I'd really have to hunt for CONS! If there are any they are well concealed!
    January 21, 2011
    Great Jack
    This jack was easy to punch down and fit perfectly in the wall plate. I will order these again.
    May 7, 2017
    Purchased
    3 months ago
    Great deal
    5/5

    PROS: Good price and nice deals!

    CONS: Shipping with Canada Post are a litlle long but worth the waiting.
    July 16, 2013

    In Stock This item should ship today (7/24/2017) if ordered within 8 hours 18 minutes
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART