Monoprice MP Select PLA Plus+ Premium 3D Filament 1.75mm 1kg/spool, White
Product # 15835
UPC # 889028039441
$20.59
*Affirm is not available for business or international orders
Qty: 1
$20.59
Qty: 2-9
$20.18
Qty: 10-19
$19.87
Qty: 20-49
$19.56
Qty: 50+
$19.25
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
To see and take advantage of our member pricing sign up for a business account or contact our sales team.
Customers Also Shopped For
Questions and Answers
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 34 questions
Browse 34 questions
and 59 answers
What temp should I make the extruder on the monoprice voxel for this filament?
Zachary D
on Dec 11, 2021
BEST ANSWER: I believe you should always follow the temperature indicated for the filament. Double-check on the spool or on the filament info page, but I believe this PLA+ should be around 210° - pretty sure it's also in Celcius, too.
- Reply
- Inaccurate
- Paul O on Dec 11, 2021
- Purchased on Feb 21, 2021
BEST ANSWER: I believe you should always follow the temperature indicated for the filament. Double-check on the spool or on the filament info page, but I believe this PLA+ should be around 210° - pretty sure it's also in Celcius, too.
- Reply
- Inaccurate
- Paul O on Dec 11, 2021
- Purchased on Feb 21, 2021
I have a Creality Ender-3, but I print this filament at 215-220C. I've noticed higher numbers tend to retract better with this PLA+
- Reply
- Inaccurate
- sam on Dec 15, 2021
- Purchased on Mar 25, 2021
The label recommends printing at 210C. I had a lot of stringing at that temp and had much better results at 205
- Reply
- Inaccurate
- Josh L on Dec 15, 2021
I have really good luck with the temp at 220 and the bed at 60
- Reply
- Inaccurate
- Paul K on Dec 11, 2021
- Purchased on Jan 17, 2021
Vote for the best answer above!
You say your product is biodegradable. So how long will it take to break down. I want to use it for face cream?
A shopper
on Sep 6, 2020
BEST ANSWER: Not speaking for Monoprice themselves, all PLA is basically the same chemical constitution and will take years or hundreds of years in normal use to decompose. At best (buried deep in bacteria rich soil at high temperatures) it would take at least 6 months to even begin to decompose. I think it's last for a very long time (months or years) if it were holding face cream.
- Reply
- Inaccurate
- Joe W on Sep 6, 2020
- Purchased on Apr 1, 2020
BEST ANSWER: Not speaking for Monoprice themselves, all PLA is basically the same chemical constitution and will take years or hundreds of years in normal use to decompose. At best (buried deep in bacteria rich soil at high temperatures) it would take at least 6 months to even begin to decompose. I think it's last for a very long time (months or years) if it were holding face cream.
- Reply
- Inaccurate
- Joe W on Sep 6, 2020
- Purchased on Apr 1, 2020
While PLA is biodegradable, this is filament for use in a 3D printer, not something designed as an additive for a facial product. The average time for PLA to break down is generally listed as 80 years.
- Reply
- Inaccurate
- Timothy P on Sep 6, 2020
- Purchased on Mar 25, 2020
As far as I'm aware, it typically needs a lot of access to UV light to break down properly. As long as it's not outside, it should be fine.
- Reply
- Inaccurate
- Joshua A on Sep 6, 2020
- Purchased on Dec 2, 2019
It's plastic. Assume it will remain in the environment longer than you do.
- Reply
- Inaccurate
- Jesse Bodine B on Jan 2, 2022
- Purchased on Jan 2, 2022
Vote for the best answer above!
Should I use this or PETG?
New User U
on Feb 15, 2019
BEST ANSWER: If physical properties of the filament are a high priority for your 3D printing application, PETG would be the first to explore.
If, on the other hand, an exact and very good aesthetic is required for your project to hit the bullseye, you should probably go for PLA.
Personally I go for PLA
If, on the other hand, an exact and very good aesthetic is required for your project to hit the bullseye, you should probably go for PLA.
Personally I go for PLA
- Reply(1)
- Inaccurate
- John B on Feb 17, 2019
- Purchased on Jun 24, 2018
What do you mean by physical properties exactly? Also when you say PLA do you mean PLA+? Thanks!
- Reply (1)
- New User U on Feb 17, 2019
By physical properties, I mean PLA can be more brittle than PETG. I usually just say (or type) PLA instead of PLA+ because besides better surface quality and being slightly more bright PLA and PLA+ are basically the same.
What material you use is more based off personal preference and what you are printing. The reason I use PLA even though it isn't the best out there is because it's cheap (I print mainly for fun not profit) and it's biodegradable.
What material you use is more based off personal preference and what you are printing. The reason I use PLA even though it isn't the best out there is because it's cheap (I print mainly for fun not profit) and it's biodegradable.
BEST ANSWER: If physical properties of the filament are a high priority for your 3D printing application, PETG would be the first to explore.
If, on the other hand, an exact and very good aesthetic is required for your project to hit the bullseye, you should probably go for PLA.
Personally I go for PLA
If, on the other hand, an exact and very good aesthetic is required for your project to hit the bullseye, you should probably go for PLA.
Personally I go for PLA
- Reply(1)
- Inaccurate
- John B on Feb 17, 2019
- Purchased on Jun 24, 2018
What do you mean by physical properties exactly? Also when you say PLA do you mean PLA+? Thanks!
- Reply (1)
- New User U on Feb 17, 2019
By physical properties, I mean PLA can be more brittle than PETG. I usually just say (or type) PLA instead of PLA+ because besides better surface quality and being slightly more bright PLA and PLA+ are basically the same.
What material you use is more based off personal preference and what you are printing. The reason I use PLA even though it isn't the best out there is because it's cheap (I print mainly for fun not profit) and it's biodegradable.
What material you use is more based off personal preference and what you are printing. The reason I use PLA even though it isn't the best out there is because it's cheap (I print mainly for fun not profit) and it's biodegradable.
It depends on what you are using it for and the capabilities of your printer.
- Reply
- Inaccurate
- Nathan M on Feb 15, 2019
- Purchased on Nov 5, 2018
Vote for the best answer above!
I love this white PLA Plus. My question is will MonoPrice be offering it in a master spool format?
A shopper
on Jun 13, 2018
BEST ANSWER: Why is monoprice sending this question to customers? How would we know? But yes, PLA Plus is my favorite filament too.
- Reply
- Inaccurate
- Kendall A on Jun 13, 2018
- Purchased on Nov 19, 2017
BEST ANSWER: Why is monoprice sending this question to customers? How would we know? But yes, PLA Plus is my favorite filament too.
- Reply
- Inaccurate
- Kendall A on Jun 13, 2018
- Purchased on Nov 19, 2017
Vote for the best answer above!
I would like to know the 1kg spool dimensions to see if it would fit into the AMS unit of the Bambu Lab Carbon X1?
A shopper
on Oct 13, 2022
BEST ANSWER: 57mm height, 197mm diameter
- Reply
- Inaccurate
- ARNOLD S. on Oct 18, 2022
- Purchased on Dec 27, 2021
BEST ANSWER: 57mm height, 197mm diameter
- Reply
- Inaccurate
- ARNOLD S. on Oct 18, 2022
- Purchased on Dec 27, 2021
Vote for the best answer above!
Questions For Similar Products
Reviews
4.6 / 5.0
200 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
159
24
6
5
6
Rated 3 out of 5
It is ok still trying to get it to a smoother look
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Very white and, works well for wall panels and Benchy's I have printed.
This filament is bright white, brighter than any other white I have used. It works well on both my ender 3 v2 and Bambu lab P1P. Have been printing walls and the floor for a building model and they all have come out very nice. I will buy again!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
pleasantly surprised
Very good filament for the money. I just finished my first roll, and I honestly expected the worst given the "no name" status. No clogs or crazy print settings and all the prints so far have come out great.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
March 7, 2023
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Excellent filament
I love mono-price filament. I just used the rest of a reel from a year ago and it still isn't brittle.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Good quality, fast ship time and killer price
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
No Problems!
Great filament at an even better price!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Very easy to print :)
I was surprised with the quality, definitley will buy again ??
Great quality prints
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Great for a beginner
Just picked up a 3D printer and some of this PLA+ to go with it. It's been printing great. Especially for me being brand new to 3D printing. Plus you can't beat the price. Monoprice PLA+ is probably my go to from here on out.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Rated 5 out of 5
??very good??
This is some very nice filament, I have already bought some more colors.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Reviews for Similar Products