Very nice blue, prints perfectly. Would be 5 star, but different spools are slightly different colors. You can't use two spools to do the same project.

Great color and quality filament!!
Great color and quality filament!!

Good quality plastic. Some air bubbles every now and then.

Nice clean prints.. True color from picture. No clogging Issues so far.

The filament has an amazing color and is some of the strongest PLA I've had. I would highly recommend this filament.

Standard PLA is easy to print, relatively inexpensive, and widely available. But it is also quite brittle, not suitable for heavy use like toys or moving parts. PLA+ does the job, with more flexibility and without the chemical odor of ABS. I've also noticed that it is able to print with more accuracy, as the description states.

To print successfully, here is what I do:
1. Print at 210/55C
2. Let the bed cool as it tends to stick at higher temperature
3. When using supports, set the raft air gap at least 0.3 mm.
4. Remove supports and other trims by using a small long-nosed pliers. I bought mine, along with a small angle plier, at Walmart for five bucks total.

I've used a whole roll of PLA+ now and I really like the results. It's softer and more pliable then regular PLA and just feels better in the hand. Working parts fit well together with no sanding or trimming. Most parts have little to no stringing and even overhangs come out looking good. Admittedly I do have a good USA designed printer.

My Settings:
Printer: Deezmaker Bukito
Nozzle size: 0.5mm
Nozzle temp: 183C
Z thickness: 0.2mm
No heated bed, print on 3M blue tape.