The picture nothing like what you’ll receive. There is no divider in the middle/each strand pair is foiled shielded/the white wires is not stripped.

Conductors are too thick for any of the three RJ45 plugs I tried (including one of the ones recommended by Monoprice in the Q&A here). Don't recommend if you want to terminate in an RJ45 - maybe if you're going to a jack.

This cable did the trick. We had one device that was always giving us trouble, replacing the cable run with this shielded run worked great. The cable length printed on the sheath also was a great feature that lets us know how much we have left in the box.

Good top quality cable. We had no issues with it. It should be noted that we had to terminate it to a jack verses an RJ45 connector due to the thickness of the wires for the 4 pairs

Used Cat 6 STP to run Ethernet from my basement to my garage for a HDMI Extender (Monoprice Blackbird HDMI Extender, 50m, PoC, IR Kit, Loop Out). Wires are solid and the shield and plastic separator make the cable stiff but it did go through conduit and the 90 degree bends weren't an issue. Took a few tries to get RJ45 ends crimped correctly, but was finally successful and everything worked.

I combined this with a couple of Neutrik Ethercon connectors to created an installed digital snake. Works wonderfully because of the shielding in the cable. It can be a little hard to work with for the inexperienced because it's so thick. Make sure you get the correct connectors (7301) cat6 STP and smash the cable into it properly.

The product is as described it is CAT6 wire...works fine...didn't need 250ft so have some leftover...