Volume Pricing (Log In to see Member Pricing)
HDBaseT Receiver, 100m (328ft)
Monoprice is a proud member of the HDBaseT Alliance
Add another receiver to your HDBaseT™ installation with this HDBaseT Receiver from Monoprice!
This HDBaseT Receiver is designed to convert an HDBaseT signal sent from an HDBaseT transmitter over Cat6 cable into an HDMI® signal for use with an HDTV. It allows for a full bandwidth 10.2Gbps data throughput, which means that it supports all High Speed HDMI functions, including all HDMI 3D video modes, the extended 4K cinema resolution, 32-bit Deep Color, and high-definition compressed lossless audio, such as DTS-HD Master Audio™ and Dolby TrueHD™.
The Receiver includes support for bidirectional Infrared (IR) Remote Control repeating. Additionally, it has two RJ45 LAN jacks for extending your local area network coverage. As long as the network is connected to the RJ45 jacks on the HDBaseT transmitting device or on this receiver, the network connection will be propagated throughout the HDBaseT system.
- Extends HDMI signals up to 328 feet (100 meters) using a single Cat6 cable
- Extends 100Base-TX network connectivity along with the HDMI video
- Can be daisy chained up to six units deep
- Built-in bidirectional IR repeater
- Supports all High Speed HDMI functions, including 3D video
This HDBaseT device is fully compatible with these other HDBaseT extender products from Monoprice:
- PID 10224 HDBaseT Wall Plate Extender
- PID 10225 HDBaseT Extender
- PID 10226 HDBaseT 4x2 HDMI Matrix Switch
- PID 10228 HDBaseT Wall Receiver
Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
|Supported Video||High Speed HDMI® with HDCP 1.2|
|Supported Resolutions||1080p, 1080i, 720p, 576p, 576i, 480p, 480i|
|Color Support||up to 12-bit/channel Deep Color (36-bit total)|
|Audio Support||LPCM, Dolby AC3, DTS® 7.1, DSD|
|Bandwidth/Data Throughput||up to 10.2Gbps|
|Operating Temperature Range||+5 ~ +131°F (-15 ~ +55°C)|
|Operating Humidity Range||5 ~ 90% RH (no condensation)|
- User's Manual (Mar 19, 2013)
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™, and DTS-HD Master Audio™ are trademarks of DTS, Inc.
Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby TrueHD™ is a trademark of Dolby Laboratories.
Questions and Answers
I have Cat5E throughout the house structured wiring. I plugged this in next to my DirecTV receiver, patched the connection through to the garage (150+ feet), plugged the receiver in at the TV in the garage and voila, flawless picture. I've installed Wireless HDMI in a few rooms at almost the same cost and even though it works, there always seems to be a hiccup when the TVs in the bedrooms served haven't been use for some time. I'm going to run this for a few weeks but will probably replace the wireless devices if it continues to perform.
Will report back then!!!! For now, two thumbs up.
PROS: Simple setup
Works on Cat5E as advertised
They just work
CONS: No thus far
Both units ran hot with the receiver somewhat hotter. For $200, I expected a product that would work for a few years. This is unacceptable for modern solid state devices.
Monoprice, what would you do for customers who purchased these units that failed so soon after the warranty?
11 months ago