Volume Pricing (Log In to see Member Pricing)
High Quality Adjustable Tilting Desk Mount Bracket for LCD LED (Max 17.5Lbs, 15~22inch) - Black
Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!
Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.
The mount attaches to the edge of a desk, table, or other horizontal surface with a maximum thickness of about 3.5". It includes a soft rubber pad to protect the finish of your mounting surface. Alternatively, it can be fixed to a grommet screwed into the top of the mounting surface.
It features a jointed 22.8" extension arm, which allows you to position your monitor at exactly the right height, angle, and distance. The monitor can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits monitors up to 17.6 lbs weight with either a 75x75 or 100x100 VESA mounting pattern.
- Fits monitors with VESA 75x75 and 100x100 mounting patterns
- Tilts +/- 15 degrees
- Rotates 360 degrees allowing for easy portrait or landscape orientation
- Jointed 22.8" extension arm
- Height adjustable to about 11.8"
- Clamps to surfaces up to 3.5" thick
- Alternate grommet mounting option
- Includes cable management clips
- User's Manual (Jul 15, 2011)
|Minimum VESA||75 x 75|
|Maximum VESA||100 x 100|
|Maximum Weight||17.5 lbs|
|Minimum Display Size||15"|
|Maximum Display Size||22"|
|Tilt Range||±15 degrees|
|Swivel Range||±90 degrees|
|Rotation Range||360 degrees|
|Color||Black and Chrome|
|Wall Plate Dimensions||N/A|
|Front Plate Dimensions|
|Built In Level||No|
PROS: A+1 Quality, sturdy and very well built with quality materials.
PROS: Easy to install, looks great, outstanding value
Make sure you bolt it properly to your desk if using larger than recommended monitors and don't use those 3 black screws!
PROS: Great length, feels strong, can manoeuvre any way you like, multiple mounting options, good cable management.
CONS: My desk does not have an overhang at the rear, so I could not use the clamp. I instead used the 3 included screws and screwed it directly into the surface of my desk. I mounted an over-size 27" LCD panel to the bracket. I could see it was torquing up on the desk where it had been screwed in, but appeared to be holding fine. 3 weeks later, I came home to find that it had fallen over and ripped out of the desk. Lucky for me, the monitor edge landed on my keyboard tray and was balanced there, and did not sustain any damage. I did not realize until this moment that my desktop surface was not hardwood, but cheap particle board, and the veneer had been ripped up when it fell over. I went to Home Depot, bought some 2 inch bolts that would fit the mount along with some washers and nuts. I cleared up the fibre stuff that was pulled out of the desk and drilled the existing holes through the desk, then re-mounted the stand with the new bolts, washers and nuts. I tightened it well and you can't even tell anymore that it had pulled out. Now it appears to be holding extra solid and nothing's going to rip it out again.
PROS: Cheap, Monoprice is super-easy to work with if there's a bad one
CONS: The clamp is a little thick so double-check that you have clearance if you're mounting close to a wall or office panel. They are also a little bit loose and sometimes need some extra tightening.
PROS: This stand is very sturdy, once you get it into position it stays there. you can also make slight adjustments if you want with out loosening the whole thing. I also liked the fact that you can take out sections of the arms so that you can make it short for those tight squeezes between your desk and the wall.
CONS: The only con is that i had to but two arms and mount them to the same pole for the setup i wanted, because the double ones arms cant be individually adjusted for height. I have two 21.5 inch monitors one mounted portrait and the other in landscape. another issue is i had to take apart the section that turns the monitor into portrait to tighten the bolt, it would try to spin if i hadn't. this was due to my monitors mount area being off center, but it still had to be done.
I love this mount! I am using it for my 27" HP monitor and it's like a rock, yet still flexible enough to move around when needed. I firmly believe Monoprice needs to double check the weight limit listed on this mount this thing is a beast.
My only complaint is with the mounting plate. I had to scrap a bit of paint off the inside where the arm attaches so it would slide in all the way. This didn't bother me because I knew it was gonna fit nice and tight without any wiggle or play, which is good.
It comes with the parts to mount it directly to the desk with screws (these screws seem a little short, I will problem get longer ones if I ever attach it this way) and the clamp attachment to clamp it to the side of your desk. When I opened the box I knew I had made the right choice buying this over the cheaper 5402 and you will too. Spend the extra money cause its money well spent.
PROS: -High quality
-Easy to setup
CONS: -Heavy (not that you'll be carrying it around much, unless you travel with it.)
All in all, this mount holds my monitor where I put it, so the initial setup is really the only complaint.
PROS: Has capability for attaching via a clamp or screwed directly to desk top.
*Holds up my 23.6" monitor with no sag (10lbs).
*Allows for monitor rotation to landscape (my 23.6" monitor can just barely clear the desk top with this stand at its highest)
*Strong and easy to adjust on all joints EXCEPT vertical (see cons).
*Comes with anti-scratch pads for the clamp to preserve desk top.
*Desk clamp can hook onto a thin desk (such as glass) without trouble.
*Grommet connection is very solid. The stand does not move.
*Individual joints can be tightened or loosened individually.
*Up/Down tilt is strong, though difficult to work with (see cons).
CONS: *The clamp is BIG. It cannot hook onto desks with a small desk top overhang lip (you need about 2" minimum of desk to hook onto).
* The vertical adjustment is done with a friction clamp like some speaker stands. It does its job but is hard to tighten enough and is generally difficult to work with. You will feel like you're about to break the tightening lever before you get it tight enough to hold.
* The vertical adjustment uses a plastic rather than a rubber friction pad. This lets the friction clamp rotate on the mast in some instances if it's not tight enough.
* The up/down tilt adjustment is hard to tighten. It uses the supplied allen wrench to tighten a bolt but the allen wrench is not long enough to comfortably tighten this joint as far as you'll need to. I suggest pliers or some other method of increasing torque when tightening.
* The cable clips cannot easily hold three or more cables. I suggest velcro or some other attachment system if you use more than two large-diameter (power, DVI, VGA, HDMI) cables.
PROS: Large Range of motion.
Rotate the display for portrait or landscape
CONS: The clamp range needs to be extended about 3/8" I had to remove the pad to fit it on my desk and it still barely fit.
PROS: Low Cost, Sturdy, easy to install and functional
CONS: Instructions could be better