Volume Pricing (Log In to see Member Pricing)
Adjustable Tilting QUAD Desk Mount Bracket for LCD LED (Max 33Lbs, 10~23inch) - Black
Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!
Using a desk mount bracket provides additional desk space by moving the monitor above the desk. It allows you to position your monitor at eye level, which reduces neck/back strain and pain from lengthy sessions in front of the computer.
This mount attaches to the edge of a desk, table, or other horizontal surface with two attachment points at each end of the bracket. Four monitors can be attached to the mount in a 2x2 arrangement. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits four monitors weighing up to 33 lbs each, with either 75x75 or 100x100 VESA mounting patterns.
- Fits monitors with VESA 75x75 and 100x100 mounting patterns
- Tilts ±30 degrees
- Rotates 360 degrees allowing for easy portrait or landscape orientation
- Steel construction with aluminum VESA plate
- 29.5" high and 39.4" wide
- User's Manual (Aug 30, 2011)
|Minimum VESA||75 x 75|
|Maximum VESA||100 x 100|
|Maximum Weight||33 lbs/display|
|Minimum Display Size||10"|
|Maximum Display Size||23"|
|Height Range||29.5" and 39.4"|
|Tilt Range||±30 degrees|
|Rotation Range||360 degrees|
|Construction||Steel and Aluminum|
|Wall Plate Dimensions||N/A|
|Front Plate Dimensions||4.5" x 4.5"|
|Built In Level||No|
PROS: Easy to assemble, very useful item. Solid structure
CONS: Really needs two people to mount correctly especially if you test measured your setup using your monitors. Hanging 22" flatscreens causes the horizontal arms to roll down. The horizontal arms/bars should have some sort of stopper/set-screw built in.
Are there any accessories designed to attach to these? I'd love to mount some speakers on the sides.
PROS: Excellent deal for the price. Well-made. Attractive looking.
CONS: Too many degrees of freedom during installation made it a lengthy process.
PROS: Very well made, great value.
CONS: The pivot points on the mounts turn down, but this is easy to remedy by turning the sleeve on the mount so it sits straight.
They should sell extra horizontal bars and lcd mounts by themselves because if you had two more of those horizontal bars and put them out to the side of the original rectangle. you'd be able to mount 8 or 9 lcd's. I have 2 23" LCD's and 3 17" LCDs mounted on just one of these units and plan on ordering another one very soon.
The quality and build of the mount are great. I 3 this place.
PROS: My son has 24" Dell and Benq monitors mounted on the same cross bar, the unit is only rated for 23
CONS: "Be careful not get the hardware fastened tigntly, without ober tightening, samall margin for error either way.
It went together just as advertised. I installed 4 equal size 23" monitors for use with day trading.
I definitely felt I got my money's worth. Be sure your monitors have the standard 100mm mounting shoe such as are used on a lot of TV's for wall mounting. Not all monitors have such a mounting shoe.
PROS: Quality of parts was very good. It even came with the necessary Allen wrenches.
CONS: It was a little hard to tighten the uprights to the desk when the desk was against the wall.
It would be nice to be able to orient some of the monitors vertically rather than horizontally.
Greater height of the uprights would be required to do that.
PROS: Sturdy construction and excellent height range. Mounting brackets are removable in case you want to mount fewer than 4 monitors.
CONS: On one of the mounting brackets, the one screw that attaches the swivel head to the bracket was very loose and required tightening. I recommend checking EVERY bolt and screw on this assembly when you install it.
PROS: Nicely adjustable (I had it for 2x2 but changed to 1 on top , 3 on the bottom)
PROS: Real metal, nice powder coat finish. Really well built. Extremely stable. Good components and build quality.
CONS: May have to buy additional screws to attach swivel mount to displays, depending on your displays. Not enough swivel mounts, I could see this being capable of supporting more than 4 monitors.