Volume Pricing (Log In to see Member Pricing)
Wireless Speaker Transmitter
Are you tired of all the speaker wires running around your home theater or stereo room? Connect your speakers wirelessly with this Wireless Speaker Transmitter kit from Monoprice!
This kit consists of a wireless transmitter/preamp and a combination wireless receiver and 30 watt/channel amplifier. In a typical configuration, you connect your two speakers to the receiver/amplifier and connect your input device to the transmitter, using the 3.5mm TRS input jack. The audio signal is then wireless transmitted to the receiver, which amplifies the output for the speakers. The receiver/amplifier also sports a 3.5mm TRS input jack, which allows you to use the amplifier in a direct connection, bypassing the wireless transmission system.
The transmitter operates in the 2.4GHz range (2400~2483MHz) with multiple channels to avoid interference from other 2.4GHz devices. By setting each transmitter to a different channel, multiple wireless transmitter kits can be used simultaneously to drive each stereo pair in a 5.1 or 7.1 channel audio system.
A single transmitter is also capable of being paired with multiple receivers, allowing you to configure multiple wireless stereo speaker zones for simultaneous transmission to different rooms or to different locations in a large room or open area.
|Total Harmonic Distortion||0.3%@1KHz|
|Operating Temperature||-13 ~ +185°F (-25 ~ +85°C)|
|Audio Transmitter Power Requirements||3.6~6.0 VDC|
|Output power of the Transmitter||20dBm|
|Amplifier Power Requirements||14 VDC|
|Output power of the Amplifier||30W+30W|
- 1x Wireless Audio Transmitter
- 1x Transmitter AC Adapter (5 VDC, 500mA)
- 1x Wireless Receiver/Amplifier
- 1x Receiver/Amplifier AC Adapter (14 VDC, 2.5A)
- 1x AC Power Cord (IEC 60320 C7 to unpolarized NEMA 1-15)
- 1x 3.5mm Stereo Audio Cable (37")
- 1x 3.5mm to L/R Speaker Wire (24")
CONS: Needs additional component wiring. Instructions not the best, but not surprised considering the origin.
PROS: Used in a house over a distance of 35 feet with two intervening walls and a bookcase, and with Both Wi-Fi service and Bluetooth active in the same house, transmission is flawless. The units are unobtrusive, and easily hidden or screened.
CONS: Thye very small size of the units means the controls are small also, and the on-off switches are not ready to hand. The units will probably be left "on" permanently. Time will tell whether this affects their performance or life expectancy.
PROS: Ease of use and setup.
CONS: Receiver amp could be more powerful.
PROS: arrived fast, it was easy to hook up
CONS: little rough on syncing up the frequency, speakers poping sound, keep loosing signal
PROS: Worked right out of the box
This unit is excellent in that the range is fine for my HT room, I have not encountered any interference at all, the inputs are standard (and includes all cables), and can use any standard speaker.
The only thing I wish it had, which is the same problem with every system of this type, is a more powerful amplifier. I'm using bookshelf-size studio monitors that are mid-level power hungry, and they could use a little more amp at higher volume levels.
PROS: Very easy setup, works perfectly.
CONS: I wish it had more amplifier power.
PROS: Ability to select different channel to avoid wi-fi router interference.
CONS: Needed to buy a speaker line out to RCA converter to work with my system (minor)
CONS: Static, popping/cracking sounds, loses signal, instructions are terrible, need two people to sync transmitter with receiver according to the instructions.
PROS: wireless. amplifier. dual-channel
CONS: not sold w/o wireless transmitter/receiver, i.e. would be nice as a standalone amplifier. dual (stereo) outputs cannot be bridged to increase units 2x30w to 1x50-60w.
PROS: No wires running across the floor
CONS: Not much power( not much volume)
Makes a popping sound every once in a while