Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Fixed Wall Mount Bracket for LCD LED Plasma (Max 200 lbs, 37~63 inch)
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Low Profile Wall Mount Bracket from Monoprice!
This mount bracket features an ultra-slim form factor, which puts the back of the TV only about 0.6" away from the wall, making it ideal for displays with side or bottom facing connections.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 200x200 and 800x500, which includes most 37" to 63" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 200 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
- User's Manual (Mar 3, 2011)
|Minimum VESA||200 x 200|
|Maximum VESA||800 x 500|
|Maximum Weight||200 lbs|
|Minimum Display Size||37"|
|Maximum Display Size||63"|
|Wall Plate Dimensions||36.7" x 8.3"|
|Front Plate Dimensions||N/A|
|Built In Level||Yes|
|Notes:||No logo on mount|
The other issue, not related to the mount, is that this TV have very little clearance between the TV and the wall. If I didnt have a WII plugged into it it probably would be ok using a 45 degree HDMI adapter but I do and since the inputs are directly behind the TV and not on the side or the bottom it presented a problem. The inputs are also not centered on the TV either but are fairly close to the right hand side as you face the TV. So I redneck rigged it by installing 2 1/2 inch strips of red oak behind the mount to give it some breathing room and all was well. Mount looks great. Just FYI if you have a TV like this.
Easy to install
CONS: Wall Clearance
Mounting spacers too short
PROS: good price
CONS: inaccurate built in level. I had to do the whole thing after I mounted it due to the level being way off.
The affordable price means you sacrifice a few things. This does not have any tilt which is fine. It does not have the kick-stands for when you need to get behind the display on the wall and service some cables.
I first tried going at it without the included spacers, unfortunately there just wasn't enough room for the cables I needed to sneak through. So off the TV came, added the small spacers which gave me space to route my cables. I noticed that the built in bubble level was loose and would shift giving a completely inaccurate reading. If I relied solely on this built in bubble, my TV would be totally crooked. Fortunately I had a large bubble level that was accurate. Nice effort including it but it can cause far more harm than good if its not accurate.
There is little wiggle room when first mounting the TV, you really need to come down near perfectly perpendicular to the ground in order for the TV mounts to catch on to the horizontal rail.
PROS: Good Value, affordable overnight shipping to California, assorted screws and spacers included.
CONS: Inaccurate bubble level, no cable-service kickstand
Also, even tho I listed it also as a con, this holds the tv so close to the wall you can forget getting behind it! To release the locks to remove the TV there are two release cables you must pull. With the tv mounted, it is an exercise in frustration to get hold of them should you want to adjust the tv's placement. I would suggest hooking a small wire hook to them allowing it to dangle below the screen until you're positive on the placement.
I would whole heartedly recommend these and would absolutely buy one again.
PROS: SUPER SLIM, CLOSE MOUNT
CONS: Cheap plastic trim doesn't hold up being shipped around the world.
TV mounted SO CLOSE to the wall is nearly impossible to "unlock" to move.
PROS: About as low profile as you would want. Spring clips for earthquake safety and security.
CONS: Really no cons for this price. Attach zip ties to extend the release straps. If you are not a good enough mounter, and require post-installation leveling, then pay more for that feature in a more expensive mount.
PROS: Inexpensive * Rugged * Robust * easy to hang/install * All the needed hardware is included * attractive* easy to install * nice bolts for the wall *
CONS: If I had to find a con...Pull/release wires are a tad short, would be nice if they were adjustable in length. The plastic side ends arrvied broken due to them being on the mount when it shipped. But you never see them since they are BEHIND the TV. Also, Monoprice did offer to send me a repalcement unit but I declined since I already installed what I had and as I said, you will never see it.
PROS: easy to install, well-built
CONS: insufficient hardware for my tv
PROS: Everything about it along with the price...simplicity, you name it its great
CONS: None that I could/can find
My TV, a Samsung 55" D7000 series, required a couple extra 1/2" washers to mount the brackets to the TV properly. The spacers included with this kit were too short (bolts bottomed out before they contacted the mount), and the spacers included with the TV were too long (mounts were not flush with the back of the TV) 2 washers under each bolt made the fit perfect.
Make sure you connect the cables BEFORE you hang the TV. This mount is very low-profile, and it's almost impossible to connect cables afterwards.
PROS: Solid construction, good number of mounting options, hardware included.
CONS: Built-in level was a little crooked.
May require different spacers/washers based on your TV