Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Smooth Full-Motion TV Wall Mount Bracket (Min 5.5 - Max 44 lbs, 23 - 42 inch)
Add another dimension to your HDTV wall mount with this Smooth Motion Adjustable Tilting/Swiveling Wall Mount Bracket from Monoprice!
Most fully articulating wall mounts provide adjustment in three dimensions: swivel the display angle horizontally, tilt the display angle vertically, and extend the display out away from the wall. This mount adds the ability to adjust the height of the display.
Equipped with an adjustable counterbalance weight in the extension arm, this mount can be height adjusted up to 13" with nothing more than a gentle push. When the counterbalance weight is properly adjusted, the arm will stay in position, without creeping upwards or downwards.
The mount is designed to fit the 100x100, 200x100, and 200x200 VESA sizes. The extension arms allow the display to be situated anywhere from 2.2" to 22.8" away from the wall. The bracket can swivel 90° in either direction, can be tilted up to 15° up or down, and can be rotated ±3° to ensure that your display is leveled. It also includes a cable management system to help keep your installation clean and professional looking.
The bracket is designed to fit most TVs in the 23" to 42" size range, with weight between 5.5 and 44 lbs (2.5 ~ 20 kg). It comes with all the hardware needed to mount the bracket to a wooden stud or concrete/brick wall surface. Additionally, it comes with eight sets of mounting screws of various sizes to attach the bracket to your display, as well as the Allen keys needed to adjust the arm counterbalance.
|Minimum VESA||100 x 100|
|Maximum VESA||200 x 200|
|Minimum Weight||5.5 lbs|
|Maximum Weight||44 lbs|
|Minimum Display Size||23"|
|Maximum Display Size||42"|
|Tilt Range||±15 degrees|
|Swivel Range||±90 degrees|
|Rotation Range||±3 degrees|
|Construction||Steel and Plastic|
|Color||Black and Silver|
|Wall Plate Dimensions||2.7" x 7.5"|
|Front Plate Dimensions||9.0" x 9.0"|
|Built In Level||No|
|Notes:||No logo on mount|
- 1x Articulated arm assembly
- 4x M4x14 screw
- 4x M5x14 screw
- 4x M6x14 screw
- 4x M8x15 screw
- 4x M8x25 screw
- 4x D4 washer
- 4x D5 washer
- 4x D6 washer
- 4x D8 washer
- 4x 13.5x5.5x3.2 spacer
- 1x 3mm Allen key
- 1x 6mm Allen key
- 3x ST6.3x55 screw
- 3x Concrete anchor
Installation was fairly simple. I used my stud finder to find a stud to secure the mount to. The kit comes with 3 bolts to secure the mounting arm to the wall. The plate that attaches to the TV is held in place by two large round knurled nuts which are easy to remove by hand.
Since my television is an LED, it's pretty light and I was able to do the installation by myself.
The hardest part of the installation was adjusting the tension. The mounting arm comes in a bent position and you have to straighten it to access the adjustment bolt with the included Allen key. The tension is pretty high at first so it's difficult to straighten. But I found that once it was mounted, if you put one hand on the elbow of the arm and then pull down on the end of the forearm, it was much easier. Once you have it straightened, you can easly adjust the tention to allow it to move freely with the TV mounted. Just as the description says, once you adjust it correctly for the weight of your television, the arm will adjust higher or lower easily without drifting on its own after you let go.
The mount has plastic coverplate to hide the bolts that hold the mount to the wall giving it a very clean look.
When I saw the photos on the website, I was afraid that it would just be a metal arm with cheap plastic shells all over it that would pop off easily. But what I ended up getting was a very high quality item. Most of the arm is a nice glossy silver painted metal. The only plastic other than the bolt cover plates is on the forearm but it doesn't feel soft, plasticy or cheap. It is well bolted on to the arm and the top portion is finished in the same glossy silver finish as the metal parts. Over all the whole product looks and feels premium.
I would highly recommend this mount to anyone looking for a single arm articulating mount with a wide range of motion for any 32 inch or smaller television. It would probably also work with a larger television as long as the mounting holes on your television do not exceed 200mm x 200mm.
PROS: Sturdy construction
Wide range of movement
Simple to install
Some built-in cable management
CONS: Initial tension setting was a little stiff
In addition, the included M-A screws are a bit short for my
PROS: • This is a solidly built mount, and once you figure out how to use it it's a good mount.
• It's a good looking mount.
CONS: • Inadequateterriblewood screws.
• Somewhat difficult to adjust the swing arm of the mountparticularly for a light monitor.
• Huge back plate. I suppose it must be to accommodate 200x200, but it sure covers a lot of real estate on the back of my monitor and my TV
Usually one of the toughest parts of the installation is adjusting the tension on the arm. The mounting arm comes in a bent position and you have to straighten it to access the adjustment bolt with the included Allen key. The tension is pretty high at first so it's difficult to straighten. But once the display is mounted, if you put one hand on the elbow of the arm and then pull down on the end of the forearm, its much easier this way. Once you have it straightened, you can easily adjust the tension to allow it to move freely with the TV mounted. Once you adjust it correctly for the weight of your television, the arm will adjust higher or lower easily without drifting on its own after you let go.
PROS: Truly full motion
CONS: some trouble getting it to move up and down initially
PROS: Solid construction, looks good, includes all hardware and has incredible range of motion. It has vertical travel of 7.5 inches above and below horizontal arm. Easy to mount. I have been looking for an item like this in this price range for a couple of years.
CONS: The tensioner screw is hard to access initially. Instructions say to make sure it is in a horizontal position when you adust it. I had to place it on a step and then place a foot on the horizontal arm and push down with my hand with considerable force to reach horizontal. I would estimate the tension was set at approximately 75+ pounds. I list this not because it is a con but to give you advance notice that it is difficult. If it is mounted into a stud you could adjust it later, otherwise I recommend doing before you mount.
I was excited to have a mount that could hold a TV high on one side and then swivel down and over to be low on the other side. Unfortunately, the angle between the bottom of the TV and the floor changes when the TV is moved from one location to the other. The spec. list +/- 3degrees of rotation range, but to access this, one needs to loosen 4 nuts behind the TV, then level the TV and then re-tighten the nuts. This turns what would have been a great product into something that is disappointing. Alas.
It seems like maintaining level would have (should have?) been part of the mechanical design of the mount. Or if not, then there should be an easy adjustment without needing tools. the message from tech support was "From what you've described, we may not have a mount that will fit your application."
PROS: Has the normal left/right and the relatively unique up and down adjustment.
Installation was straightforaward
CONS: Display does not stay level through the range of motion. The only option is to loosen the bolts that attach the VESA plate and re-level each time the display is moved.
PROS: Strong, adjustable in all directions. Comes with good directions, packed into its own box.
CONS: Part of plastic cable covers is a bit flimsy. Could use built in level.
PROS: In, Out, Up, Down and Tilt!
PROS: Looks, Price, Quality
CONS: No Holes for 75x75
PROS: very solid build quality - elegant aesthetics - well thought out and easy to install
PROS: Bought this for the travel trailer. Works great. Very easy installation. You don't have to be a rocket scientist to figure out how it works. Very simple. In fact going to order another one for the kitchen tv right now.
CONS: Nothing that I can think of. Had it almost a year.