Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Titan Series Swivel Wall Mount for Medium 32 - 46 inch TVs 125lbs Black
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting/Swiveling Wall Mount Bracket from Monoprice!
This mount bracket supports adjustments in three dimensions; it can be swiveled ±90° and can be tilted up to 5° upward and 15° downward. Additionally, it can be extended from a minimum distance to the wall of 3.8" to a maximum of 24.7". It also features cable management clips to help keep your installation clean and professional looking.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern of 100x100, 200x100, 200x200, or 400x300, which includes most 32" to 46" displays*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 125 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your display is compatible with this mount as long as it has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
- User's Manual (Mar 3, 2011)
|Minimum VESA||100 x 100|
|Maximum VESA||400 x 300|
|Maximum Weight||125 lbs|
|Minimum Display Size||32"|
|Maximum Display Size||46"|
|Tilt Range||+5/-15 degrees|
|Swivel Range||±90 degrees|
|Wall Plate Dimensions||3.0" x 12.5"|
|Front Plate Dimensions||17.3" x 16.7"|
|Built In Level||No|
|Notes:||No logo on mount|
PROS: 24" extension.
Mounts to single wall stud.
VESA standard patterns up to 400x300.
CONS: No cons
Mounting to wall:
-Center of TV plate is 5 inches left of stud when fully retracted/flush with wallconsider this if trying to center the TV somewhere
-3x 2" coarse wood screws are questionable for a TV toward maximum capacity, but more than enough for a new, lightweight TV
Attaching TV bracket:
-Given hardware was too long or too short to mount to a new 40" Samsung (needed M8x25 or M8x40 screws, supplied M8x20 and M8x35)
-Instructions are VERY poorthink it out rather than rely on directions
-Be careful of where bracket attachesthe optimal position covered my TV power plug
-Not supplied M8 washers as instructions recommended
-Once mounted, TV bracket directly interfered with tilt-lock handle
-If upgrading to lag bolts, approprite diameter is 1/4", recommended length is 2" (2" screws provided)
-If attempting to use washers for final mounting, purchase M8 washers (none provided)
-Minimize trips to the hardware storemake sure the given hardware will attach the bracket to the TV
-Doable with one person, but will be easier/safer/faster with 2
-There is a set screw that can help adjust TV levelness after final installation
None of this should scare you away, just make sure you know what you are getting.
PROS: Strong single-stud mount
Doable one person install
CONS: Incompatible hardware
Frustrating TV bracket
Not clearly specified an off-center mount
PROS: Pretty solid unit, way more solid than I expected. This is no flimsy piece of sheet metal or aluminum. This is a STOUT unit, and easily capable of holding a forty-five pound 46" LED tv. It could probably hold something bigger, but I might question the strength of a single wall stud. But if your wall is strong enough, so is this mount! Plenty of hardware is included, to cover a wide variety of mounting needs and situations.
And I absolutely LOVE the swivel-mount part to it. This is in a bedroom that needs to face either a desk or a bed, and I can swivel it back and forth with one hand quite easily. I don't fool around much with the tilt, but it's not difficult to figure out. Takes a bit more work with that.
And compared to the price that other units were selling for at BestBuy, WalMart, and even Amazon....it's a deal that can't be beat!!
CONS: The only reason I didn't give this a ten is that the instructions aren't 100% clear. Don't get me wrong, they're complete instructions, and there are pictures included, but it took a bit of interpretation to figure out exactly what went where. But once I figured it all out, it took me about thirty minutes and a screwdriver to get it all rigged up.
PROS: Quality products at an extremely affordable price, with fast delivery.
CONS: None what so ever
PROS: very great product very awesome price
PROS: Well-constructed, strong, sturdy.
CONS: Not easily adapted to a SONY 46" LED (VESA 300). Brackets don't line up well with screw holes on set.
CONS: Mounting plate covered access to all the wire connection points on back of a Sony Bravia.
Wire guides arrived broken
PROS: Good quality bracket at a great price. Is doing a great job with a 40" flat screen (about 35).
CONS: Only handles 30cm spacing for the mounting screws. Our new Samsung had 40cm spacing so I had to spend a few minutes in the shop making some adapter bars. I probably did not read the specs closely enough.
PROS: This product is of excellent quality at an excellent price. The mount is sturdy, highly adjustable, and easy to install.
CONS: We had to reverse how the VESA bracket is put together to work with the Samsung UN32D4003, the instructions should be updated to reflect this possibility.
PROS: Easy to install, great adjustability, great quality and solid construction