Works as described. it didn't come with any screws, which I thought for some reason. I am using it to hold up a 32" TV with my old mount for a 27" TV. The 32" actually weighs less than the old 27" did, so no worries.

Used this adapter plate to mount a new Sony 43-inch on an older adapter arm. The original TV used 200 x 200, the new Sony is drilled and tapped for M6 bolts in a 200 tall by 100 wide pattern.. Along with this plated I used M6 bolts, lock washers, and nuts from Home Depot -- and eight 1/4-inch plastic standoffs from Amazon. You need the standoff to provide clearance for the boltheads.

The adapter plate is very solid. I also purchased a "universal" adapter plate from another vendor but I couldn't use it. it was not square, more of a butterfly, and the holes were too big to provide a secure mount. This one worked right out of the box in my application..

This is a heavy gauge (16ga or maybe 14ga), steel, thickly powder coated, adapter plate. I used this to adapt a 26" Sony that had a 200mm VESA pattern to a {Monoprice Product: 3613 - Low Profile Wall Mount Bracket for LCD (Max 66Lbs, VESA 50/75/100MM)} mount that only had 50, 75, & 100mm VESA holes. It worked just great!

Used to adapt a 6277 to fit a 32" Samsung that used 200x200 VESA. Everything lined up fine, it was easy to install, and it's very sturdy.

I used a screw gun and pliers to get the nuts on, I think it could probably hold up a car.

PROS: Sturdy, well constructed, does its job, great price.

CONS: Wish it came in black.

There's not a lot to say about this product, as it's quite simple. It's an adapter plate that attaches to a VESA 50x50mm, 75x75mm, or 100x100mm bracket to allow it to attach to a VESA 200x200mm monitor or television. I've purchased five of these to adapt some clamp-on desk brackets to allow mounting of some 32" LED HDTV's to my desk. The mounting holes to attach the plate to the bracket were off a bit, but this may be partly due to the holes on the bracket being off as well (less than 1mm, not a bit deal). These adapter plates are only available in a silver finish, which doesn't matter in my installation (they won't be seen), but if you were using them on a desk mount in the middle of the room with black mounts or televisions/monitors, this would definitely be noticeable. It's a simple product, and it does exactly what it was meant to do. Keep in mind that while they allow you to mount a larger display on a , weight restrictions still apply, and the plate adds a bit of extra weight to the load on the mount. If you need to mount a display with 200x200mm mounting flanges to a50x50mm, 75x75mm, or 100x100mm mount, this is the product for you. You don't just get the plate, you get a fastener kit with a nice assortment of bolts and screws to attach the plate to your mount and the plate to your display, and also some spacers to go between the plate and the display in case you need additional clearance. The kit includes four beveled machine screws and fiberlock nuts to attach the plate to your mount. All in all, a good product. Thanks, Monoprice!

PROS: Nice assortment of hardware for ease of installation.

Beveled mounting holes used to attach plate to bracket allow mount to remain flush for easy attachment to monitor or TV.

CONS: Only available in silver.

A few of the pre-drilled mounting holes are slightly off.

This basically a stout piece of metal that has been punched with multiple sets of holes to allow adaption among various mounting hole patterns. It does exactly what it advertises. The adapter is heavy enough to support most anything that you would mount to it. It's ugly but you don't see it anyway once mounted.

PROS: Multiple hole positions to adapt among many mounting patterns

CONS: None

fast delivery. easy to mount.

PROS: Solid, adjustible and great price

CONS: none

Works really well. No problem matching holes to existing bracket and new TV

As described, works fine, nothing spectacular. Recommend.

Excellent Product ,Unbeatable Price

PROS: Hardware Included

CONS: none