Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White
    Product # 10552
    Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White
    Product # 10552
    Color : White
    In Stock This item will ship on 8/1/2016 if ordered within 1 days 14 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $19.99
    Qty: 2-9 $19.75
    Qty: 10-19 $19.50
    Qty: 20-49 $19.25
    Qty: 50+ $18.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White

    Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice!

    PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn.

    This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

    The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.

    Reel Dimensions:

    • Reel Diameter: 195mm (7.68")
    • Hub Diameter: 95mm (3.74")
    • Spindle Diameter: 38mm (1.50")
    • Reel Width: 80mm (3.15")

    Related Categories

    63 Reviews

    84.13% of the reviewers recommend this product


    Good PLA

    • Anonymous,
    •  Port Huron, MI 
    • 7/24/2016 5:25:22 PM

    Pros: Prints good, cheap

    Cons: Wide spool, no resealable bag.

    Prints great, Colour is a bit clear. I tend to run it at 210, sticks 90% of the area. Colour matches the blue screen on the IIIP printer sold here. Spool is wide, will not fit holder on printers sold here without some work.

    Was this review helpful to you?

    Temperature Rating

    • First Time Customer,
    •  Concord, CA 
    • 7/14/2016 2:03:19 PM

    Pros: Price
    Works well with printer

    Cons: Spool label doesn't have recommended temp. range.

    As a first time user, I had a hard time figuring out to what temperature I needed to set the extruder for this product. With a web search, I was able to get started but it would be helpful if a recommended temp. range was printed on the spool label. Maybe under the weight? Seems easy enough to do.

    Otherwise the product is fine and offered at a decent price. Color is good and filament works well with the printer.

    Was this review helpful to you?

    best PLA color

    • nileo guerra,
    •  ,  
    • 7/10/2016 4:20:23 PM

    Pros: all

    Cons: none

    This is the best color in PLA material that I getting here . I love the way the color come up. no clog nozzle either.

    Was this review helpful to you?

    Poor quality filament

    • Anonymous,
    •  Hartselle, AL 
    • 7/4/2016 6:18:26 AM

    I have not had much luck with this filament. I have trouble getting it to stick to the print bed where other brands have no problem at all. When I do get a decent print, the result is extremely brittle and the parts break with very little pressure applied. I do love ordering from Monoprice so I wish I could recommend this filament. Perhaps I just got a bad roll.

    Was this review helpful to you?

    Great filament 1.75mm PLA

    • Anonymous,
    •  Woodland, WA 
    • 5/9/2016 7:58:26 AM

    Pros: Price, consistency, spool quality, color quality.

    Cons: None. This is great filament.

    I didn't realize Monoprice sold filament until a few days before I bought a spool of blue PLA and a spool of white PLA.

    The spools the PLA comes on are silly robust, unlike the thin walled one piece spools other PLA I've purchased came on.

    The PLA feeds easily in to the hod end of my QU-BD Two Up with Borden extruder and E3D v6 hotend. The Monoprice PLA filament gives great results at 200c using 0.07mm to 1.0mm layer heights and 10% to 50% infills. I'm working on a project that requires parts that are taking my printer fifteen hours to print. I've been printing near round the clock for four days straight without issue.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout