Surface Mount Box Cat5e Single
    Product # 7090
    Surface Mount Box Cat5e Single
    Product # 7090
    In Stock This item will ship on 5/1/2017 if ordered within 1 days 19 hours 36 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $1.34
    Qty: 2-9 $1.26
    Qty: 10-19 $1.20
    Qty: 20-49 $1.14
    Qty: 50+ $1.07

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Surface Mount Box Cat5e Single

    Surface mount CAT 5e box for when in-wall box and wire installation are not possible. A clean and simple solution for network expansion.
    Box is durable plastic and white in color.
    Comes with double sided adhesive tape to mount the box to the wall, or you can use the two screws provided to screw it down to baseboard, window sill, trim, etc..
    Jack is included.
    Wire connections are easy. You'll use a 110D or Krone impact tool to crimp and connect the wires.
    Box has a slit in the back side to allow the wire to enter the box for flush moutning. Box top snaps on and off for easy access to wires.
    Use it with stranded or solid cable, any gauge.
    Installation instructions included in package.

    Support Files:

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    4.8 / 5.0
    11 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    These are great and a huge improvement over terminating with RJ45 ends

    PROS: sturdy, compact and low cost

    CONS: If you're not careful, you can misread the wire arrangement sequence for the B standard
    July 26, 2012
    Perfect Simple Ethernet Jack Solution
    I used a couple of these boxes for the rooms where I didn't want to go through the trouble of putting a jack in the wall. These are really easy to set up and come with screws to mount as well as sticky double-sided foam tape. My only complaint I don't understand why the pins aren't numbered sequentially, (i.e. 1,2,3,4,5,6...). It was just a little confusing, really doesn't matter as long as you make sure the other end of the cable is wired exactly the same. Also I used a really thin flathead screwdriver to push the wires down, make sure they are all the way down.

    PROS: Inexpensive, sturdy, easy to use.

    CONS: Was not a fan of the instructions, not a deal breaker.
    April 14, 2014
    Easy installation! You'll need a 110-blade punchdown tool. The box is small and unobtrusive. It includes screws and sticky tape for mounting to just about any surface.

    Just one thing to watch out for: the blue/blue-white wires are switched with respect to all the other pairs. I didn't have a cable tester, so I am unable to say if this is a typo in the documentation.

    Overall, I'm very pleased with this outlet box.
    August 20, 2011
    Solid little enclosure
    Very nice little box for terminating cat5e. I used mine to house a 1-wire temp sensor (DS18B20) soldered some 24awg leads to the sensor, punched those down in the box, and then connected the sensor to my 1-wire network with cat5e

    PROS: great value for the price.

    CONS: a little larger than I need, but looks nice surface mounted on walls, panels, ceilings
    January 27, 2015
    As expected, at a lower price
    Simple device. Worked as expected, plus we saved by ordering from Monoprice.
    December 19, 2016
    6 months ago
    I was pleasantly surprised by the quality of these terminal boxes they were much better than I expected them to be. Easy termination and they even come with a small tie wrap to secure the cable. I would highly recommend these.

    PROS: Good looking and very usable

    CONS: none
    January 31, 2014
    RJ45 jack w/ housing
    I've been using a variety of RJ45 inserts for a long time (ICC has been my favorite) and, of course, having to buy separate surface boxes to go with them. No more. These all-in-one jacks are the perfect solution. They punch down very easily and are even attractive. Can't beat the price, as inserts and separate boxes are normally far more.

    PROS: Convenient, very inexpensive, space saving.

    CONS: I have to use up my existing supplies of inserts and surface boxes.
    February 14, 2013
    Great Value
    This is an excellent value when considering cost of individual components: enclosure and keystone jack. Removing cover does not require a tool.

    PROS: This product is an excellent value because cost of item is less than cost of enclosure and keystone jack. Removing cover does not require a tool.

    CONS: Size is a bit large, but acceptable. Would prefer a more compact model. A label writing area is missing.
    May 22, 2013
    Excellent Value
    Excellent value and I will buy more. Previously we bought separate housings and separate RJ45 jacks

    PROS: This is a great value because purchasing housing and RJ45 jack separately costs more. Cover easily removes without tools

    CONS: Slightly larger than separate pieces from other manufacturers
    June 30, 2012
    does the job
    sturdy plastic, included zip-tie for securing the cable and both screws and double-stick pad for mounting options. I wasn't aware this required a punch-down tool (just didn't think to check, I see it is in the description) but I was able to secure the wires with a very-thin screwdriver, even correcting a misplaced wire without issue. Works great, worth the 2 bucks.
    February 25, 2016

    Tax and shipping will be calculated at checkout