Dual High-Quality Gold Plated Speaker Banana Plugs, Black
    Product # 2945
    Dual High-Quality Gold Plated Speaker Banana Plugs, Black
    Product # 2945
    $1.79
    Color : Black
    Quantity:
    In Stock This item should ship tomorrow (4/28/2017) if ordered within 14 hours 42 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $1.79
    Qty: 2-9 $1.69
    Qty: 10-19 $1.59
    Qty: 20-49 $1.49
    Qty: 50+ $1.38

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Dual High-Quality Gold Plated Speaker Banana Plugs, Black

    Banana plugs make speaker installation a breeze. They are designed for use with amplifiers or speakers that use traditional binding posts. Not only is it easier to make the connection on the back of your amp, it is safer, with no chance of stray wire strands creating a short across contacts.

    This high-quality dual plug has two banana plugs spaced 3/4" center-to-center with a red plastic yoke, the typical distance between binding posts on speakers. The plugs are the open screw type and can accept bare wire, spades, or other banana plugs. They are sized to fit speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.

    The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections.

    Features:

    • Can accept bare wire, spades, or other banana plugs
    • Can accept 12 to 18 AWG speaker wires
    • Color coded black/red rings for maintaining proper polarity
    • Secure, positive contact with binding posts
    • Corrosion resistant, 24K gold plated brass plug
    • Black plastic binding yoke
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    4.3 / 5.0
    100 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    60
    21
    10
    5
    4
    Check your receiver speaker terminal spacing first.
    I've never had a problem before with these banana plugs till I purchased an Onkyo TX-NR656. I expected/assumed that receiver speaker terminals were a standard distance between each other for the + and -. Not so with my new Onkyo, so check first before ordering as you may need to go to the singles for a lessor cost.
    September 8, 2016
    Not so high quality
    The banana plugs are specified to accept 18 - 12 gauge wire. I find that the openings are quite large so no problem at the upper end but the screw does not bottom in the opening. Therefore, the 14 gauge wire still works fine (Im sure that 12 gauge would be OK too) but the 16 gauge wire is too thin for the screw to get enough bite to hold the wire securely - even doubling the wire by folding it over. Im sure 18 gauge wouldnt work at all. I would also say that the plastic looks and feels really cheap - although they do work otherwise.
    December 30, 2008
    Disappointing
    I bought the separate banana plugs from MP a while ago. Nice, hefty units. I thought these would be the same, just joined by the plastic holder. Not at all. These also require the wire to be pushed into the connector perpendicular to it and mashed by twisting the barrels. Don't like them. At all.

    CONS: Cannot be "backwired". Flimsy metal
    July 15, 2014
    Plugs are Plugs
    What else can I say? These are well made plugs, and are doing a good job.
    August 20, 2013
    fine speakers, but check your AVR jacks
    They work fine as +/- banana plugs for my speakers, where the jacks are 3/4" apart, but the spacing of the +/- jacks on many AVRs (like my Denon) is 1", so these don't work at that end (though they would work to pair +/+ or -/- AVR jacks...but that would be most confusing). Would love for Monoprice to offer a set where the plugs are spaced 1" apart.

    PROS: inexpensive

    CONS: plug spacing may not be right for all hardware
    February 10, 2013
    Black or Red its the best deal for these connectors.
    My Onkyo home theatre system has never been so happy. Great deal and fast delivery
    March 10, 2017
    Purchased
    1 month ago
    5/5
    5/5

    PROS: very good product
    August 20, 2010
    Great Quaiity
    These are better than most I have found at local audio dealers, at 1/3 the cost.

    PROS: SOLID
    January 15, 2011
    5/5
    Good quality but didn't fit the spacing on my new Sony receiver. I cut the plastic connectors and installed individually. I actually like the way I had to install them because the plastic gives them a nice little handle.

    PROS: Good quality

    Screws didn't strip when tightened

    CONS: Not spaced for my receiver
    February 7, 2014
    great product, with the right gauge wire.
    These work great with the wall-plates that fit and on many amplifiers. The only downside is the speaker wire must be 14-12-gauge minimal to hold tight. When there's 16-gauge wire, you're out of luck.
    - Paul
    August 17, 2009

    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART