HDMI® Extender/1x2 Splitter
    Product # 8158
    HDMI® Extender/1x2 Splitter
    Product # 8158
    $93.30
    Quantity:
    In Stock This item should ship today (4/24/2017) if ordered within 11 hours 30 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $93.30
    Qty: 2-9 $92.21
    Qty: 10-19 $91.11
    Qty: 20-49 $90.02
    Qty: 50+ $88.92

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    HDMI® Extender/1x2 Splitter

    You've got your awesome home theater setup in the family room, but sometimes you want to watch TV in the kitchen or out on the back porch when you barbecue. Don't waste money buying more equipment or cable TV feeds, just use this handy 1x2 Amplifier Splitter from Monoprice!

    When you need to exceed the recommended maximum distance of 25 feet for High Speed 1080p HDMI® signals, your best option is to use an HDMI extender that sends the signal over Cat5e/Cat6 network cable. Until recently, most extenders required the use of two Cat5e/6 cables for each extension, one to handle the DDC signal and the other for the TMDS signal.

    This splitter reliably sends the High Speed 1080p signal over just a single Cat5e/6 cable! This not only reduces costs, but reduces the hassle of running two cables. The splitter takes a single HDMI input and sends the signal over up to two Cat5e/6 cables to separate locations. Two receiver units are included to decode the signal at the other end and connect to the HDMI input of your display.

    Features:

    • Easy to install, just plug it in and start using it right away!
    • Extends High Speed 1080p HDMI signals up to 50 meters (164 feet)
    • Splits the HDMI input into two outputs to HDMI over Cat5e/6 cable
    • Uses just a single piece of Cat5e/6 cable for each extension
    • Supports 165 MHz/1.65 Gbps per channel (4.95 Gbps all channel) bandwidth
    • Supports 8-bit per channel (24-bit all channel) deep color
    • Supports uncompressed audio, such as LPCM
    • Gold-plated HDMI connectors
    • Complies with CE, FCC, UL (Canadian and US), and RoHS standards

    Note: Monoprice strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this splitter, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.



    Support Files:



    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    Specifications
    Input DDC Signal 5 volts p-p (TTL)
    Maximum Resolution 1920x1080p
    Video Amplifier Bandwidth 165 MHz / 1.65 Gbps
    Vertical Frequency Range 50/60 Hz
    Supported Resolutions 480i (SD), 480p, 576i, 576p, 720p, 1080i, 1080p
    External Power Supplies 5 VDC, 2A
    Amplifier Power Consumption 10W
    Receiver Power Consumption 5W
    Operating Temperature Range 0°C to +70°C
    Operating Humidity Range 10% to 85% RH (no condensation)
    Storage Temperature Range -10°C to +80°C
    Storage Humidity Range 5% to 90% RH (no condensation)
    Amplifier Dimensions 3 31/32" wide, 4" deep, 15/16" high
    Receiver Dimensions 3 15/16" wide, 2 19/32" deep, 1" high
    Amplifier Weight 285 gm
    Amplifier Weight 385 gm
    Regulatory Compliance FCC, CE, RoHS, UL


    Included in the Box:

    • 1x HDMI® Amplifier Splitter
    • 2x Extender receivers
    • 3x AC adapter with 44" cord
    • 6x Mounting bracket
    • 12x Mounting screws
    • 1x User manual


    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    SEEMS LIKE MOST PEOPLE ARE USING THIS PRODUCT TO FEED TWO TV'S WITH ONE DVR BOX IN ORDER TO CUT DOWN ON MONTHLY FEES. HOW CAN YOU CONTROL ONE DVR FROM TWO DIFFERENT ROOMS? IF YOU USE AN IR EXTENDER THEN THE BOX ITSELF WILL NOT REACT TO THE REMOTE CONTROL.
    A shopper on Dec 1, 2016
    BEST ANSWER: Works well if your DVR box supports RF remote and you have one remote for each location.
    This may work better for your situation if you have IR remote controls only. Be sure to read the specs to make sure it fits your needs: http://www.monoprice.com/product?p_id=15521#QA
    4.1 / 5.0
    40 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    27
    2
    2
    4
    5
    Enjoy it while it lasts
    I have had two of these products fail on me after a few months of use. In both cases, product worked fine for 1-2 months but then I started experiencing 5-8 sec drops in the signal (i.e, momentarily blank TV screen). Eventually, a first output on the transmitter failed completely, and then the second followed suit. Monoprice replaced the first through an RMA process and has agreed to replace the 2nd one. However, this doesn't make up for the amount of use I've on my primary TV, the time and effort wasted in taking the mounted TV down twice to remove the receiver for returns, or the cost of shipping the product back twice. I asked the RMA rep if other customers had experienced similar problems (since I've had the same exact result twice) and he said he wasn't aware of other reports. However, I've read of similar experiences from other purchasers on various internet forums, so I know I'm not unique. And since monoprice is waiting until they have received and processed the return before sending out the replacement, it means the whole process will be stalled at least a few days until I can find time to unmount my TV once again so I can access the receiver that is tucked in a crevice on the back panel of the TV between the wall and the rear of the TV. It's probably not prudent to install this some place difficult to access as there's a good chance the product will eventually need to be disconnected and returned. I think it might be worth spending extra money for something reliable.

    PROS: While it works, the product seems effective.

    CONS: Very poor reliability
    November 6, 2012
    5/5
    Great product. I used to to split an output for a security camera system setup. Couldnt be happier!

    PROS: Easy to setup

    No settings to mess with

    Plug and Play

    CONS: Wish the HDMI and Ethernet plug where on the same side.
    October 9, 2014
    DirecTv to Two TVs
    Using this splitter to send my DirecTV HDMI to a TV in the living room and a TV in the kitchen. Distances in both cases are only around 30-40 feet.

    But I have no complaints about this unit and was very happy with how easy it was to connect and start using. Even my one con of requiring a separate power supply for each unit (the one splitter and two receivers) is not so much a problem as it is annoying. From my research I understand the HDMI splitters that only use power from the HDMI port do not work as well so I suppose the separate power supply for splitters will be a con for all splitters until someone comes up with a better splitter.

    PROS: Easy to setup
    Perfect picture

    CONS: Each device requires a separate power supply
    July 5, 2013
    Works perfectly with Apple TV
    We have this setup at our church hooked up to 2 Viewsonic Pro8500 projectors. It works perfectly with the Apple TV - very impressed. No compatibility issues or hdmi weirdness.

    Note: I used 1 shielded Cat5e cable for each extender box at about 100'

    PROS: Product IS HDCP compliant (chatted with tech support as I couldn't find it in the description.

    CONS: None
    March 5, 2012
    great unit
    One word of caution. You will need 2 Cat6 cables and 3 HDMI cables. Order them at the same time.

    PROS: Works just as advertised. I am using a75' Cat6 cable. Great solution to doubling your HDMI signal from an older DISH satellite receiver that only feeds hi def to one TV.
    August 11, 2014
    Continued success
    I own several of these splitter/extenders. Most recently 1X2, but I have 1X8 and 1X4 units in operation. They work well for sending HDMI over a distance of 168 feet and even farther (not recommended). They are reliable. Only issue I have had is that they don't work well with CAT6 jacks inline. I like to finish to an RJ45 wall plate but have had some problems unless the CAT 6 cable is terminated with an RJ45 plug and no jacks inline. Not such a big issues in most cases. They have been solid performers for me.

    PROS: Reliable

    Good price point

    Solves problem of getting HDMI signal over an extended distance

    CONS: Doesn't like standard CAT6 jacks in the signal chain
    August 12, 2014
    Works as advertised, Amazingly fast shipping
    Does a great job if you don't have a 3D TV. I have to figure a way around this.

    PROS: Shipped overnight same day it was ordered, arrived next morning.
    Works as advertised - able to add HDTV in another room to my DirecTV DVR.

    CONS: I didn't check the specs enough to realize that this does not support 3D. With it I get a message on my 3D Channels that thinks my TV isn't a 3D type, so they are blocked.
    Changing channels with my DVR seems to take twice as long to show on TV as before, and the sound begins until about one second after picture.
    August 1, 2012
    Works like a charm!
    Bought this item in December. Works like a charm! 5.1 Dolby Digital Surround sound is passed through along with 1080p video. No blips no pixelation. Combined this item with PID 8150 so that I can switch between two different sources. Works great together. I have one output in the living room and one in the bedroom. Mind your distance.

    PROS: Supports 5.1 Dolby Digital Surround sound.
    Supports 1080p resolution.
    Doubles the output.
    Can output to two separate sources simultaneously with no loss in quality.
    Plug and Play.

    CONS: Works with only one source.
    All three must be plugged in to work.
    No USB power source.
    Plugs are huge.
    February 26, 2013
    Perfect!
    I have been using a Monoprice HDMI splitter to drive two HDTVs. One was 20' and the other was 70' of HDMI cable. The Panasonic Plasma was on the 20' cable and worked perfectly. The LG was at the end of the long cable and it also worked without issue. I decided to upgrade the LG to a larger LED TV. However, when I replace the LG with a new Vizio it would not sync with the source. I finally got it work by using a 50' cable but that was not a long term solution since the cable would only reach if I ran it through the hallways. I tried a better quality 65' cable that would reach but it also would not synch. So, in one last attempt I purchased this splitter/extender and replaced by HDMI splitter/long cable solution. It worked right out of the box. It cost a bit more but it is hassle free. I like that it uses only one cat6 cable. Wiring through the attic was so much easier than with the thick HDMI. The receivers are small enough but they require power so thats a design consideration. It would be cool if the IR could be run on the same cat6 as well. With the current solution I need to run a separate 3 conductor wire to carry the IR from the TV back to the source. No big issue, just another cable. I am thinking or demoting the power supply for the receiver as well. Its 5 Volt. I need to see how sensitive the receiver is to the voltage drop over 75ft.



    Anyway, I will buy this splitter again or the larger version.

    PROS: It works on 75ft cat6

    CONS: receiver units need power

    Only two ports
    May 18, 2014
    Finally , one that works GREAT and cost effective
    finally a cat5/6 splitter that actually works with no issues.. This was a great item on a very long cat5e run to split incoming cable to 2 tvs for a customer install on a large outdoor BBQ patio setup.. will be using more of these

    PROS: plug and play

    CONS: none
    September 2, 2016

    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART