Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large Bottle) for LCD & Plasmas TV, all iPad, iPhone, Galaxy Tabs, and Smartphones
4x2 Powered HDMI Matrix Mini Switch with Remote
If you're like most people, you have your home theater setup in one room, but have TVs in other rooms as well. This gives everyone in the house the ability to watch what they want, when they want. But what if the kids want to watch a DVD while you want to watch the big game in the living room with your friends? You can lug the DVD player to the other room for the kids, but a better solution is to use an this 4x2 HDMI® Mini Matrix Switch from Monoprice!
With this switch you don't need to move equipment from room-to-room, nor do you have to buy duplicate equipment for the other room. This matrix provides 4 HDMI inputs, which allows you to connect the Xbox 360®, cable box, blu-ray player, and the output from your Android phone. Any of these four inputs can be independently selected for either of the two outputs. Both displays can select the same or different inputs.
The switch includes a remote control, allowing direct selection of any of the inputs for each of the two outputs. It has a built-in equalizer to compensate for weak HDMI signals and supports the full High Speed 1080p@60Hz HDMI video resolution. It is powered by an included 5 VDC, 2A AC adapter. The four input and two output HDMI ports are gold plated to ensure smooth, corrosion-free connections.
This matrix measures only 4.5" x 2.4" x 1.3" (115 x 60 x 32 mm). A spare/replacement remote is available as PID 12383.
Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
- User's Manual (Jun 6, 2011)
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Microsoft®, Xbox®, and Xbox 360® are registered trademarks of Microsoft Corporation.
Questions and Answers
Assuming the monitors you are using are used for both the PC and the Laptop, this may be possible. You will need to be able to provide 2 inputs from your PC and 2 from your laptop to plug into the HDMI input ports on the switch. Inputs are labeled as 1, 2, 3, 4. Outputs are labeled as A and B, with 1 of your monitors hooked up to A and the other hooked up to B. Assume your PC inputs would be 1 and 2, and your laptop inputs are 3 and 4. You can then select input 1 to go to A and input 2 to go to B which would allow you to view your PC. You can also select input 3 to go to A and 4 to go to B and you can now view your Laptop.
First, I have a Dish DVR connected to it. It plays all the regular HD channels fine, but when I try and play a premium channel (HBO, Showtime), it puts up a warning that says it doesn't support HDCP copy protection. So all the stuff I've recorded on my DVR can't be viewed thru the switcher.
Second, it has all kinds of trouble recognizing my PS3. Sometimes it does, sometimes it doesn't. Not sure why. I changed up all the HDMI cables, so it isn't a cable issue.
Apple TV, WDTV, XB360, PC all work fine.
PROS: Can connect 4 HDMI devices without having to constantly switch cords around.
CONS: Switcher is a bit wonky
The build quality and layout design earn this device a plus point. Strong metallic cover encapsulates everything in a really small box but still provides enough space for 4 input and 2 output ports.
From my personal perspective, this device is well worth the money and definitely a better choice compare to other more expensive devices from BIG brands.
PROS: Does what it supposed to do. Two HDMI outputs at the same time is a really nice feature.
Small and good looking design which is really easy to hide. Really awesome device for the price. Simple and well designed remote control.
CONS: The LEDs are too bright.
Needs to be reset sometimes (once every 2 or 3 days) or else everything I will get is a color flashing screen.
PROS: Works flawlessly. Basic design, great price!
CONS: You will be very mad at how much you paid for other splitters and switches when you find out how awesome this thing is.
The entire reason I bought this one was because of the remote feature. I have all of my devices and the switcher in one closet and have a it run to two TVs in my house. Because the IR Repeater doesn't work with it I have to get up and go across my house to change what device I am using. You would think that a IR repeater that is a Monoprice Brand product would work with a device that has IR that is also Monoprice Brand. Super Frustrating!
PROS: Works and switches well after initial setup and getting devices to be ok with the device
CONS: Had problems with devices going through at first.
IR doesn't work with the Monoprice Dual Band IR Repeater
I would recommend to a friend.
PROS: Easy to use, switches between inputs quickly, small and compact.
CONS: The lights are to bright.
PROS: Works well with my Blu Ray player and Play Station.
CONS: Does not work with Comcast cable boxes, but after trying another type of box and doing some research, it seems Comcast boxes are not compatible with any HDMI switches.
2 of the HDMI cables plug in on the sides. Awkward and unsightly if you're trying to create a nice A/V set up.
PROS: Works well as described and easy to set-up and manipulate.
CONS: The lights on the front are beyond bright, and I had to go outside and stare into the sun for awhile just to take a break.
It's all I could afford, and if that's your case too, ya just have to learn its idiosyncrasies, and live with it.
Can't beat the price though for a matrix switcher... but try to step up if funds allow it.
(Note: these flaws MAY go away in latter s/n units... if the MFR changes the firmware)
PROS: 1) Cheap
2) Very small
3) Functionally it performs the job it is supposed to... with caveats...
CONS: 1) The side-mounted output ports (one on each Left/Right sides) really get in the way... totally defeats the purpose of designing it into such a small package.
2) The blue LEDs on the front panel are crazy bright (very directional)... be prepared to do something about this if you plan on using this in a darkened Home Theater. (the tiny remote, if leaned up against the front panel, will block the light... at least it's good for that)
3) Sometimes the matrix switch loses sync with the source when switching things around... HDMI/HDCP negotiations fail, you will need to remove the DC power connector for a few seconds, then re-connect... the output channel status LED will light, and it will be OK. Seems to be related to the order of how the source/destination devices are turned ON.
4) Remote control is super-cheap... doesn't have real buttons, but it works (usually).
5) The inputs are not completely isolated from what's happening on the outputs, even when the matrix isn't connecting a given output to the input.
HDMI Input 1 is connected to my HTPC Computer, after going through an active 1:2 HDMI-HDCP splitter. (the other Splitter output goes to my desktop Vizio 22" HDTV Computer Monitor).
HDMI output 1 is connected to my HD projector.
HDMI output 2 is connected to my 50" Sony HDTV.
I have the Matrix Switcher selected to connect Input 1 (Computer) to Output 1 (Projector).
Both "output" devices are turned OFF.
Now, if I turn the Sony TV on (which, remember, is NOT presently 'connected' through the Matrix Switcher to my PC), the Computer gets "kicked" because something happened on its HDMI output... the PC realizes the "connected monitor" has changed, removes it from the active monitor list (it 'was' my "Primary Display" in a dual monitor Win7 setup), everything now gets thrown over to my secondary (smaller, non HD) computer monitor (which has temporarily been reassigned as my new Primary monitor), then, realizing that the previous monitor is still there, Windows reassigned everything back to my normal monitor.
Here's the low-down... a Matrix switcher should completely isolate anything happening on an Output that's NOT selected/connected to a given Input... but this one doesn't... somehow. Maybe it's a matter of the intelligence/firmware in the Switcher "burps" when an output device gets turned ON, but this will cause HDMI/HDCP negotiation issues on all input-connected devices.
Just be prepared for weirdness like this if used with a HTPC.