High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type
    Product # 3325
    $3.05
    In Stock This item should ship tomorrow (7/24/2017) if ordered within 22 hours 3 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $3.05
    Qty: 2-9 $3.00
    Qty: 10-19 $2.94
    Qty: 20-49 $2.89
    Qty: 50+ $2.84

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type

    Wall plate with high quality gold plated binding posts for speakers.

    Can be used with banana plugs, spades, or bare wire.
    Same type of connector front and back.
    No soldering required.
    Corrosion resistant gold plated connectors.

    Spacing is compatible with PID# 2944 & 2945 banana plugs.

    This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. 
     
    *The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.
     
    **Requires low voltage mounting bracket - not included**
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    i need in black color do you have for two and trhee speaker?
    ANA LUISA L on Mar 22, 2017
    BEST ANSWER: Thank you for your question. Unfortunately we would not offer these wall plates in black.
    4.7 / 5.0
    121 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    95
    22
    3
    1
    0
    Ok, except the faceplate doesn't fit
    3/5

    PROS: Insert looks good, banana plugs fit, holds wires tightly.

    CONS: Insert does not fit into faceplate (or any other Decora faceplate) without altering the faceplate to cut out the corners a little less rounded. The corners on the insert are far sharper than the standard Decora corners, causing it to not fit. This flaw is obvious through the packaging without opening it. I'm wondering how these passed QC like this.
    July 8, 2014
    Excellent buy
    Great product. You can go the simple route in hooking up the wall wiring by sliding it into back post and screwing it down for a great hold and good contact. Or if you have the room inside your wall, you can use banana plugs on the wiring as well.
    I also like the two-piece design that you secure the base unit to the wall, and then the cover plate slips over that. It made it easier to ensure the wall wiring was tucked in properly and not pulling one way or another.

    PROS: Easier to use than solder-type, and looks better than Keystone jacks.

    CONS: None.
    December 11, 2011
    wrong screws
    I would give this product a 10 but when I put in the enclosed screws to the box, it prevented the plate from going on flush just like above poster said.. Got some other screws from another box and it solved the problem..Monoprice should correct this problem in the future..Looks great, nice and neat
    November 3, 2009
    High Quality Banana Binding Post Two-Piece Inset Wall Plate for 2 Speakers - Coupler Type
    I have seen this wall plate in home improvement stores for five times the pricedon't waste your money, order from Monoprice.com. It is easy to connect either stripped wires or banana plugs, and you can also easily change the jack arrangement to mount horizontally or vertically or change the angle of the wire holes by removing the back-side nuts and re-assembling. These plates also make a far better connection (measured with an ohmeter) than the spring-loaded plates I replaced.

    PROS: Flexible design, very low-resistance connections, very low price, looks good.

    CONS: None.
    July 14, 2015
    Not a perfect fit
    Generally, this works well. I had read some comments that inserts did not match the cutouts in the wall plate well, but assumed it was from a customer who used their own wall plate. I bought the listed inster/wall plate combo, and was surprised that the insert and cutout didn't match. I was able to push/snap the insert in without much trouble, but clearly the shapes are slightly different, and I'll probably file away one or the other to match.

    PROS: Largely as expected.

    CONS: The rectangular inset plate does not match the cutout in the Decora wall plate very well.
    April 1, 2015
    5/5
    Excellent Quality. Easy to use. Fit perfectly.
    July 23, 2008
    5/5
    ALso has video link for a how to use. Nice

    PROS: Quality product. SImple to use. Good tight fit.





    March 3, 2014
    Good Quality-Bad Screws
    As others have stated, the included screws that secure the plate to the gang box have a round head on them and prevent the cover plate from mounting flush.

    Regardless, these are very nice-looking and solid-feeling plates. Find some flatter screws and you're good to go.
    March 27, 2010
    5/5
    this is very good for your room hides all the wires. and its very cheap im loving this site

    PROS: perfect for my room.. i just have it done
    October 29, 2010
    SOLID!
    These are better than most I have found at local audio dealers, at 1/3 the cost.

    PROS: Good quality.

    CONS: none
    January 15, 2011

    In Stock This item should ship tomorrow (7/24/2017) if ordered within 22 hours 3 minutes
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART