Z-Wave Light Dimmer Plug In - NO LOGO
    Product # 11994
    Z-Wave Light Dimmer Plug In - NO LOGO
    Product # 11994
    $24.99
    Quantity:
    In Stock This item will ship on 10/3/2016 if ordered within 1 days 10 hours 31 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $24.99
    Qty: 2-9 $24.49
    Qty: 10-19 $23.99
    Qty: 20-49 $23.49
    Qty: 50+ $22.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Z-Wave Light Dimmer Plug In - NO LOGO

    Dim a light wirelessly using this Z-Wave® Light Dimmer from Monoprice!

    Z-Wave is an interoperable, two-way RF mesh networking technology used for home automation and security. AC-powered Z-Wave devices, such as this dimmer, act as signal repeaters for the Z-Wave network, so multiple devices result in more possible transmission routes, which helps eliminate RF "dead spots" in the network. Any Z-Wave enabled device displaying the Z-Wave logo can be used with Z-Wave devices from other manufacturers.

    This Light Dimmer can be operated remotely, using the Z-Wave controller, or directly, using the Program Switch on the device. It plugs into a standard NEMA 5-15 power outlet and includes both a Z-Wave controlled outlet and standard, unswitched outlet. It is designed so that, when it is plugged into a standard two-plug wall outlet, it will not block the other power socket. This module supports FLiRS.

    The dimmer uses the leading-edge phase-cut (TRIAC controlled) method of dimming and is suitable for use with resistive and inductive loads, which include incandescent and halogen lamps. It will work with some LED lights, but others won't work properly, even if from the same manufacturer. When using LED lighting, always make a mock-up of your project to test the compatibility of specific LED bulb models and the total load with this dimmer prior to installation.

    The following Monoprice branded LED lights have been tested and found to perform as expected in a single-bulb installation with this dimmer:



    Support Files:



    Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.

    Specifications
    Model 11994
    Protocol Z-Wave
    Frequency 908.42 MHz
    Operating Range Up to 100 feet line of sight
    Operating Temperature +5 ~ +140°F (-15 ~ +60°C)
    Maximum Resistive Load 300W for 110 VAC, 600W for 220 VAC
    Minimum Resistive Load 5W for 110 VAC, 10W for 220 VAC


    Package Contents:

    • 1x Z-Wave Light Dimmer
    • 1x User's Manual

    8 Reviews

    83.75% of the reviewers recommend this product

    ADD YOUR REVIEW

    Z-Wave Light Dimmer Plug In - NO LOGO

    • Anonymous,
    •  Ponte Vedra Beach, FL 
    • 8/8/2016 5:56:19 AM

    Pros: Works as advertised. Great price.

    Cons: Bulky size.

    Works great! No issues to include in Z-Wave network and no issues controlling afterwards.

    Was this review helpful to you?

    Works well for me and LED bulbs

    • ZDC_Shriner,
    •  St Paul, MN 
    • 6/23/2016 8:41:36 AM

    Pros: No problems and was easy to add to my Smartthings controller. I can hold the control button to bring the lights up or down manually ...

    Cons: None so far...

    I bought one to see how it worked and it worked well my smart things controller. I have it controlling a lamp with Crea LED bulbs I purchased at Costco, 60 Watt equivalent. Works in my lights on at dusk and with the lights out at a specific time. I am just starting to use the controller and was looking for reasonable priced items.

    Was this review helpful to you?

    Worked for me

    • mpsharp,
    •  San Francisco, CA 
    • 5/1/2016 7:28:32 PM

    Pros: Works. With Wink and Amazon Echo.

    Cons: Had to register as a light rather than a switch on Wink

    Easy enough to add to my Wink, though I had to add them as lights rather than switches, but that did the job. I don't have the glow issue reported by someone else here. Also, with a couple code, it matched the Amazon price.

    Was this review helpful to you?

    Do not buy to control LED bulbs

    • Joaquin,
    •  Miami, FL 
    • 3/27/2016 7:28:19 PM

    Pros: Easy to discover with Vera Light.

    Cons: Do not work with LED lights.

    As someone else stated, these Z-Wave dimmers do not fully turn off LED lights. I purchased them to control undercabinet LED strips and they do not turn off. When this controller turns OFF the Leds stay lit at about 20%.
    On the positive side, I had no problems adding them to my Vera Lite Controller running UI5. I am sure they will work ok with incandescent lights, but who uses incandescents in 2016?


    by Monoprice Administrator
    Hello Joaquin,

    I am truly sorry to hear that this light dimmer did not work out for your application. Unfortunately, as the product description for this item states, this dimmer uses the leading-edge phase-cut (TRIAC controlled) method of dimming which is suitable for use with resistive and inductive loads. This includes incandescent and halogen lamps as you mentioned. I also wanted to note that we have found that the dimmer can work with some LED lights, however others may not work even if they are from the same manufacturer. Now in case you no longer have a use for the dimmers on this order, I can assist you in setting up a return for store credit, if you would like. My apologies again for the trouble and I hope this helps.

    Gabby V.
    Product Reviews
    Was this review helpful to you?

    Descent but limited range

    • Anonymous,
    •  Raleigh, NC 
    • 2/25/2016 1:17:46 PM

    Pros: Cheap
    Nice Diming, when turned off, dimms to off.

    Cons: Range is weaker then similar competing products

    I have had this for 2 or 3 months now, it has much reduced range compared to a appliance power module from another vendor. Hard to beat for the price, but doesn't make a good repeating device.

    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART