Volume Pricing (Log In to see Member Pricing)
Z-Wave Curtain Module - NO LOGO
Control a curtain or projection screen relay and motor using this Z-Wave® Curtain Signal Module from Monoprice!
Z-Wave is an interoperable, two-way RF mesh networking technology used for home automation and security. AC-powered and some other hard-wired Z-Wave devices act as signal repeaters for the Z-Wave network, so multiple devices result in more possible transmission routes, which helps eliminate RF "dead spots" in the network. Any Z-Wave enabled device displaying the Z-Wave logo can be used with Z-Wave devices from other manufacturers.
This low-current module converts Z-Wave commands into Open, Close, and Stop signals to control a relay attached to a curtain or projection screen motor. It is designed for control only and requires the use of a separate power relay. It operates at 12 VDC with only 25mA of current and, unlike many other control modules, supports Stop signals, as well as the more common Open and Close signals. This module supports FLiRS.
- User's Manual (Dec 4, 2014)
Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries.
|Operating Range||Up to 100 feet line of sight|
|Operating Temperature||+5 ~ +140°F (-15 ~ +60°C)|
|Operating Voltage||12 VDC|
|OPEN Signal Output||-VE (negative signal), 100mA (max)|
|CLOSE Signal Output||-VE (negative signal), 100mA (max)|
|STOP Signal Output||-VE (negative signal), 100mA (max)|
- 1x Z-Wave Curtain Signal Module
- 1x Wiring Harness
- 1x User's Manual
NOTE: This does not come with a power supply, so you need a small 12v power supply.
The Open, Close and Stop signals are about 1 second long.
I have METechs curtain motor and Vera Z-Wave controller, installation was easy.
CONS: Needs 12v power supply