Dash Cam Suction Mount For MHD Sport 2.0 Wi-Fi® Action Camera
    Product # 10634
    Dash Cam Suction Mount For MHD Sport 2.0 Wi-Fi® Action Camera
    Product # 10634
    Out of Stock ETA: TBD


    Due to limited supply, all products are sold on a first-come first-serve basis.  Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.

    *Your information will only be used to notify you when this item becomes available. Carrier charges may apply for SMS text messages.

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $5.50
    Qty: 2-9 $5.50
    Qty: 10-19 $5.50
    Qty: 20-49 $5.50
    Qty: 50+ $5.50

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Dash Cam Suction Mount For MHD Sport 2.0 Wi-Fi® Action Camera

    Mount your Wi-Fi® Action Cam to your vehicle's dash using this Dash Cam Suction Mount from Monoprice!

    This mount uses a strong suction cup to remain firmly attached to any smooth, flat surface, yet can be easily removed. The mount features tilt and pan adjustments, so you can fine tune the camera's angle without detaching the mount.

    This accessory is compatible with the Monoprice MHD Sport 2.0 Wi-Fi Action Camera (PID 12571) and the Monoprice MHD Sport 2.0 Wi-Fi Action Camera with Wrist Remote (PID 12570).

    Wi-Fi is a registered trademark of Wi-Fi Alliance.

    7 Reviews

    68.57% of the reviewers recommend this product


    Should be named WINDSHIELD mount, not DASH

    • TedP,
    •  Oreland, PA 
    • 2/20/2016 9:31:32 AM

    Pros: cheap

    Cons: not enough range of movement to be a universal mount for everywhere

    Suction is good. Just realize the way the arm and ball joint work together, you will never have the camera parallel to the mount. It will not work on a dash or flat surface. Works fine on the windshield. Wish I read the reviews before ordering.

    Was this review helpful to you?

    Camera can't be parallel to mounting surface

    • Dima,
    •  Daly City, CA 
    • 12/14/2015 1:10:28 AM

    No matter the good attributes of this suction cup mount, it's somewhat useless for a dash cam setup. The camera can't be aimed properly due to the angle of the mount and the lack of flexibility. I just can't get a good angle from the dashboard or the top of the glass.

    Was this review helpful to you?

    Good Cam Mount

    • Steve R,
    •  Boise, ID 
    • 10/19/2015 6:56:22 AM

    Pros: Easy to mount
    Easy to adjust
    Good price

    Cons: The connector for the camera is loose fitting.

    My first use for my new MHD camera and this mount was a 4,000 mile driving vacation. This mount was very easy to attach to the inside of the windshield. The size is compact enough my vision was not dangerously impaired. The mount is easily adjusted so the angle of the camera is "level".
    The connector for the camera is loose. The camera wiggles within the cam mount itself. In addition to the unavoidable road vibration this caused videos to be unviewable. I had a plastic tooth pick handy and pushed that into the mount/camera connector which held the camera steady in the mount. Once this problem was solved the videos captured were very good. Even the road vibration was not at all disturbing when viewing the videos which is a compliment to this mount.

    Was this review helpful to you?

    Dash Cam Suction Cup mount

    • AB,
    •  Erie, PA 
    • 6/19/2014 11:02:30 AM

    Pros: -Price.
    -Works well if mounted to a surface that is angled (like a windshield).

    Cons: -Camera cannot be mounted parallel to mounting surface.
    -As others have stated, the camera does rattle a little bit while on the mount - it should be a tighter connection.
    -It stayed on my windshield for about 30 minutes, then fell.

    I bought this mount to use on my boat. I wanted to use this suction cup on the bow of the boat, having the camera face forward. However, it will not - it will always be angled slightly down. It does work as intended though - which is mounting it to a windshield, having the camera face forward. It just seems that it would not have been very difficult to have the mount be able to angle the camera parallel with the mounting surface. If you are looking for a suction cup mount to put on a flat surface and aim straight forward, then look elsewhere.

    Was this review helpful to you?

    How to fix the loose attachment

    • Derek,
    •  Blue Springs, MO 
    • 3/23/2014 5:55:26 PM

    Pros: Super cheap compared to the competition.

    Cons: The mount is pretty loose and it rattles which makes pretty much any other sound a background noise to the rattle. I have a fix though!

    To fix this, just put a thin piece of paper between the suction attachment and the camera body. Then put the attachment on and snap it into place. Then just rip the paper around the mount area. This then creates a solid mount and the camera doesn't shake. Kind of a pain, and if it gets wet, I bet it won't work, but it beats returning it or moving to a different camera altogether.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout