Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Stable Series Full Motion Wall Mount for Extra Large 60 - 100 inch TVs Max 220 lbs UL Certified - No Logo
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Full Motion Wall Mount Bracket from Monoprice!
This mount bracket supports adjustments in four dimensions; it can be swiveled ±45°, can be tilted up 5° and down 15°, can be rotated ±3°, and can be extended away from the wall.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 200x200 and 900x600, which includes most 60" to 100" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 178 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
- User's Manual (May 5, 2015)
|Minimum VESA||200 x 200|
|Maximum VESA||900 x 600|
|Maximum Weight||178 lbs|
|Minimum Display Size||60"|
|Maximum Display Size||100"|
|Tilt Range||+5/-15 degrees|
|Swivel Range||±45 degrees|
|Rotation Range||±3 degrees|
|Wall Plate Dimensions||22.8" x 11.3"|
|Front Plate Dimensions||41.4" x 17.3"|
|Built In Level||No|
No logo on mount,
packaging, or manual
PROS: Low cost
PROS: Excellent design and construction
That is a lot of weight hanging on the TV stand and vertically torquing on the studs but using supplied hardware off 2 studs, it is holding the TV very sturdy. The wallplate has two sets of lagbolt mount, make sure to use the pair that is 16" (it's in mm so convert, or measure). Do use 1/4" drill to pilot for lagbolt, don't go smaller hoping it will bite into stud better, that will split the stud. and don't overtighten. Unfortunately there's no way to install more bolts unless drill a hole in mount plate, so you have to trust the 4 lagbolts will hold.
This is my third tv mount from Monoprice and I trust them. You should move to NV so i don't have to pay tax.
Be careful when you hang the tv on rails, if installing in a cabinet you are blind hanging so ensure it is fully seated on rail.
If you are not handy don't do this yourself, a dropped 65" LCD tv makes for a bad day.
PROS: no play in swivel mechanism. Solid and heavy. all hardware included. mechanism is intuitive and well designed. shipping is reasonable considering the weight. angle and rotate adjustment works well.
CONS: Difficult to make very small height adjustment like 1/8, 1/4 inch. Measure installed height twice and drill to stud once.
PROS: Strong and sturdy.
Great price value.
CONS: Took a bit of looking at the pictures to see where the screws and bolts went.
I started looking for a full motion for Marilyn. After checking a ton of different mount makers, I checked with Monoprice and their expensive, full motion mount cost $65.00. Way too cheap. It must be made of tin.. Because I have purchased many items from Monoprice and each and everyone came as described and worked perfectly, I thought that I would order the $65 mount. If the amount was cheap. I would return it.
The mount arrived. I installed the 75" Vizio. The mount worked perfectly. Holds the TV great..
Now I feel I overpaid for my $225 used mount.
I am impressed with the Monoprice full motion mount. It is well made.
PROS: inexpensive, well made, holds a 104 lb, 75" TV extremely well.
CONS: I really don't have a "Con". Now, I might if I had paid $400-$500 for the mount. But for $65.00 and it works as described, how can anyone complain.
We had it up in 15 mins and we were watching TV. Seems very sturdy and easily adjusted. Smooth operation while shifting and swiveling my 90lb set. Only complaint is that the price dropped 20 bucks in the past 2 weeks after I bought it. But it was a steal for $65 and even better for $45. GET THIS MOUNT!
PROS: - Strong, well made steel mount
- Variable holes and full range of adjustments make it work even for slightly off center installs
- Very affordable!
- Good overall design of the latches on the back of the TV
- Smooth movement even with the TV hanging on it
CONS: None that I can think of!
PROS: Easy to setup on wall. Two person job, so get help
After mounting this mount I tested it by hanging on to it, and it is strong enough to completely support my weight (155 lbs) even with the arms extended out half way out (no flex or movement). To top it all off it only cost me $45. I have compare this mount to those at FRYS and this is as good if not better than every mount they got.
PROS: Cost, very high quality, very strong, very well design, wide base, multi adjustments.
CONS: It only comes with 2 washers for the 4 lag bolts.
A friend recommended this website and bracket. I purchased 3 units.
Had it installed by a semi pro with my help. TVs are heavy and the installation is a 2 men job.
When we finished with the first one I was very happy how versatile the wall bracket is. And my toughest customer, my wife...or should I say the Boss?...she was happy also.
I'll recommend this item if you have TVs larger than 50 in. This brackets do the job because you may maneuver them almost every which way.