Ironlink Cisco GLC-SX-MMD Compatible 1000Base-SX MMF LC with DOM 850NM 550M SFP
    Product # 13158
    Ironlink Cisco GLC-SX-MMD Compatible 1000Base-SX MMF LC with DOM 850NM 550M SFP
    Product # 13158
    In Stock This item will ship in 3-5 days

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $61.75
    Qty: 2-9 $61.75
    Qty: 10-19 $61.75
    Qty: 20-49 $61.75
    Qty: 50+ $61.75

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Ironlink Cisco GLC-SX-MMD Compatible 1000Base-SX MMF LC with DOM 850NM 550M SFP


    • SFP (mini-GBIC) transceiver module
    • Up to 1.25 GBd bi-directional data links
    • Compliant with IEEE 802.3z Gigabit Ethernet and 1000BASE-SX Compliant with SFP MSA
    • Hot-pluggable SFP footprint
    • 850nm VCSEL laser transmitter
    • Duplex LC connector
    • up to 1800 ft range
    • Built-in digital diagnostic functions Up to 550m on 50/125um MMF Up to 300m on 62.5/125um MMF Single power supply 3.3V
    • RoHS Compliance
    • Class 1 laser product complies with EN 60825-1
    • Operating temperature range: 0 ~ 85°C
    • Compatible with:
      • Cisco 38XX
      • Cisco 7301
      • Cisco 7301 VAM2+
      • Cisco Catalyst 29XX
      • Cisco 3560
      • Cisco 3750
      • Cisco ME 3400
      • Cisco 4924
      • Cisco 6524

    Ironlink transceivers are built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, are guaranteed compatible, and carry a Lifetime Replacement Warranty.

    Ironlink's industry-standard SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. Ironlink transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.

    Support Files:

    Data Rate ≥1.25 GBd (IEEE 802.3)
    ≥1.062 GBd (FC-PI-2 Rev 5)
    Bit Error Rate 10−12
    Operating Temperature +32 ~ +185°F (0 ~ +85°C)
    Storage Temperature -40 ~ + 185°F (-40 ~ +85°C)
    Supply Current 180 ~ 240 mA
    Input Voltage 3 ~ 3.6 V (3.3 V typical)
    Maximum Voltage -0.5 ~ +4.0 V
    Output Optical Power (50/125um fiber, NA=0.2)1 -9 ~ -3 dBm
    Optical Center Wavelength 830 ~ 860 nm
    Optical Modulation Amplitude@1.063GBd2 156 µW
    Extinction Ratio@1.25GBd 9dB
    Spectral Width (RMS) 0.85nm
    Optical Rise/Fall Time (20% - 80%) 100 ~ 150 ps
    Relative Intensity Noise -120dB/Hz
    Deterministic Jitter Contribution 20 ~ 60 ps
    Total Jitter Contribution 65 ~ 125 ps
    Mask Margin 45%
    Optical Receiver Power 0dBm (average)
    Optical Center Wavelength 770 ~ 860 nm
    Receiver Sensitivity @ 1.25GBd -20dBm (IEEE 802.3)
    Receiver Sensitivity @ 1.063GBd -20dBm (FC-PI-2 Rev.5)
    Optical Return Loss 12dB
    Receiver Electrical 3dB Upper Cutoff Frequency 1500MHz
    Loss of Signal-Asserted -30dBm
    Loss of Signal-Deasserted -20dBm
    Loss of Signal-Hysteresis 0.5dB
    Input Differential Impedance 100 ohms (non-condensing)
    Single-Ended Data Input Swing 250 ~ 1200 mV
    Transmit Disable Voltage 2 ~ VCC V
    Transmit Enable Voltage VEE ~ VEE+0.8 V
    Single-Ended Data Output Swing 250 ~ 550 mV (450mV typical)
    Data Output Rise Time (20%-80%) 90 ~ 175 ps
    Data Output Fall Time (20%-80%) 90 ~ 175 ps
    LOS Fault 2 ~ VCC_HOST V
    LOS Normal VEE ~ VEE+0.5 V

    1 Class 1 Product

    2 Equivalent extinction ratio specification for F C

    There are no reviews for this item. Write Review
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    Tax and shipping will be calculated at checkout