High Quality Banana Binding Post Two-Piece Inset Wall Plate for 3 Speakers - Coupler Type
    Product # 3538
    High Quality Banana Binding Post Two-Piece Inset Wall Plate for 3 Speakers - Coupler Type
    Product # 3538
    $4.52
    Quantity:
    In Stock This item should ship today (12/9/2016) if ordered within 49 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $4.52
    Qty: 2-9 $4.37
    Qty: 10-19 $4.21
    Qty: 20-49 $4.06
    Qty: 50+ $3.90

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    High Quality Banana Binding Post Two-Piece Inset Wall Plate for 3 Speakers - Coupler Type

    Wall plate with high quality gold plated binding posts for speakers.

    Can be used with banana plugs, spades, or bare wire.
    Same type of connector front and back.
    No soldering required.
    Corrosion resistant gold connectors.
    Spacing between plugs is .8 inch from center to center.

    Spacing is compatible with PID# 2944 & 2945 banana plugs.

    This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.  
     
    *The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.
     
    **Requires low voltage mounting bracket - not included**
    4.7 / 5.0
    26 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    22
    3
    0
    0
    1
    Can't beat it.
    Great quality at a very reasonable price
    May 19, 2010
    Nice
    5/5

    PROS: Good price, good shipping
    January 10, 2012
    Great
    5/5

    PROS: Great price, great shipping.
    January 10, 2012
    5/5
    This worked great for my rear speakers and subwoofer. I used this wall plate the 5072 keystone jack. I unscrewed the rca plug from the keystone jack and replaced one of the banana plug jacks with it to run the subwoofer. The other banana plug is unused.
    October 29, 2009
    5/5
    I used these for rear and surrounds. THese would also make a nice one hole in the wall solution for L R C speakers in front too. These are great wall plates. The outside wall plate is not attached so you could use a fancy decora switch plate cover if you want with this. The binding posts (on both sides) are held in with a hex nut so if you are running a sub you can replace one with a coaxial coupling. These are about one zillion times cheaper than lutron and similar build your own wall jacks. You can't even get the outside plate for what these cost!! Couple this with the 4 strand 12 awg and wire for 7.1 or 9.1 or whatever. There is no reason not to with the way these are priced.
    January 16, 2008
    Banana Binding Post Wall Plate - 3 speakers
    This item was used for the center channel, front left and front right speakers in my 5.1 surround sound retrofit. The wall plate was attached to low voltage boxes (also monoprice) that were very easy to install. I also used 16 gauge in-wall speaker cable from monoprice. Overall, I've got a very good quality and sturdy wall plate. The installation was quick and simple, and you absolutely cannot beat the price and quick delivery.
    November 4, 2009
    5/5
    As always, another great product from Monoprice.
    June 2, 2010
    Great Way To Organize Your Audio Equipment!
    Turned my mess of cables sticking out of the wall into an organized outlet on the wall for plugging banana cables to my receiver. I used two of these for setting up the cable situation behind my receiver. I put them next to each other using a 2-gang wall plate instead of the 1-gang wall plate it comes with. Now all the pairs on the left are left channel and the pairs on the right are right channel. Top two sets are front and rear speakers and the bottom set is outdoor speakers.

    Works like a charm, really brought my organization together!

    PROS: Organized cables
    Easy to install (if you are handy at all)
    Compatible with standard outlet size so it can be used with different covers

    CONS: None!
    March 7, 2014
    audio cabinet
    new audio cabinet built in Family foom. these made it clean and easy

    PROS: easy and clean
    November 6, 2011
    High Quality Banana Binding Post Two-Piece Inset Wall Plate for 3 Speakers - Coupler Type
    Bought this as a spare but ended up using the 5-speaker plate instead. See my reviews for the 1-speaker and 5-speaker plates.
    July 26, 2010
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART