Volume Pricing (Log In to see Member Pricing)
6ft USB 2.0 A Male to Mini-B 4pin Male 28/28AWG Cable
The 4-pin USB mini B connector is a non-standard type connector used by some older devices, such as digital cameras and camcorders. Only use this cable if you have equipment that specifies use of a cable with a 4-pin mini B connector.
The cable uses 28 AWG conductors for both data and power. It is shielded to protect against signal interference and data loss.
- Uses a non-standard 4-pin USB mini B connector
- 28 AWG data conductors and 28 AWG power conductors
- Molded connector heads with molded strain relief boots
- Shielded to protect against external signal interference
This cable is compatible with the following camera and camcorder models:
DSC-S30, DSC-S50, DSC-S70
iRock 530, iRock 520
ZR45MC, ZR50MC, ZR65MC, ZR70MC
|Olympus||2112-DP, C700UZ, D100, D510, E10, E20, D150zoom, C2100, C3040, C-700, C4040, C2040, C-3000|
3500, 3600, 3700, 3900, 4900
CameraDock, CameraDock 6000, CameraDock II, CameraDock III
CX4230, CX4200, CX4210, CX4300, CX4310, CX6200, CX6230, CX6330, CX6445, CX7220, CX7300, CX7310, CX7330, CX7430, CX7525, CX7530
DX-3215, DX4530, DX6340, DX6440, DX7440, DX7590, DX7630, DX4900, DX3500, DX3900, DX3700, DX3600, DX3215, DX4330
PrinterDock, PrinterDock 4000, PrinterDock 6000, PrinterDock Plus Z7590
LS443, LS420 (connects to Dock) LS633, LS743, LS753
|HP||PHOTOSMART 315 , PhotoPC 3000Z, PhotoPC 3100Z|
|Epson||PhotoPC 3000Z, PhotoPC 3100Z|
|Minolta||DiMAGE 5, DiMAGE 7, DiMAGE 7i, DiMAGE 7Hi|
|Samsung||YP-NEU64, YP-NEU32, YP-NDU|
PROS: Solidly made cable, with no defections or blemishes. Using to power a Raspberry PI from a 5.0VDC source so I had to cut off the USB A end and tie the data leads together. Would recommend.