| All Customer Reviews - Click here to review for Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Crystal Clear. |
Average User Satisfaction Rate
|
 | | Rating:  (10 out of 10) | Reviewer: The Raven from Venice, CA | 6/12/2015 11:39:35 PM |
| | Dont waste your money |  Pros: Its not PLA...
Cons: VERY brittle. Not "crystal clear" after print (its just the nature of printing and light refraction). Its much more temperamental then the other ABS plastic. Does not make as clean of prints as the normal ABS.
I have tried several times with this and the prints just turn out like garbage. There seems to be a little more shrinkage then with normal ABS, and it causes a little more warping. Prints just dont come out nearly as sharp as from other ABS...
Was this review helpful to you?   |  |
|
| | Rating:  (1 out of 10) | Reviewer: Chris Andrews from Fort Collins, CO | 1/27/2015 8:25:01 AM |
| | Too Brittle, and not exactly 1.75 diam, more like 1.85 and jams | Pros: Lightening fast delivery
Cons: too brittle, easily broken. Not exactly 1.75mm diameter as advertised, and definitely not premium
I too have given up trying to print anything with this, as it is too brittle. It snapped during several attempts to print. the filament is also not exactly 1.75 diameter and measures more like 1.85 to 1.88 and jams my extruder head, causing hours of cleanup and replacement.
 by Monoprice Administrator
Hello,
Thank you for your review and truly sorry to hear about the issues experienced with PID 11548. I will submit a complaint on this filament to our product team to help resolve these issues or make the product better. Thank you for your feedback, it is greatly appreciated! If I may ask, how much filament out of the spool have you used so far? Please let me know so we can look into this further. Apologies again for the trouble and thank you in advance!
Regards,
Gabby Villa
Tech Support Associate
| Was this review helpful to you? | |
|
| | | Rating: (1 out of 10) | Reviewer: noloco from Fargo, ND | 12/17/2014 6:31:51 PM |
| | Brittle / Does not work in Makerbot | Pros: very clear
Cons: As with other people that have reviewed this filament, its very very brittle, it snaps very easily. I have found it completely unusable, by the time it prints a bed, it either snaps inside the heat head or on the wheel. I have not been able to finish one full print yet.
I would not recommend until they come up with a new version of this product.
by Monoprice Administrator
Hello noloco,
Thank you for your review and truly sorry to hear about the experience you have had with PID 11548. I will be submitting a complaint regarding this issue to our product team to help resolve the issue. Apologies again for any inconvenience this may have caused and thank you for your feedback! If I may ask, how much filament out of the spool have you used so far? Please let me know so we can look into this further. Thank you in advance!
Regards,
Gabby Villa
Tech Support Associate
| Was this review helpful to you? | |
|
| | | Rating: (1 out of 10) | Reviewer: robroe from Sooke, BC | 10/6/2014 11:04:32 AM |
| | unusable | Pros: Prints clear'ish
Cons: Too Brittle
I have given up trying to print a large part with this, as it is too brittle. It snapped during several attempts to print
by Monoprice Administrator
Hello,
Thank you for your review and truly sorry to hear about the experience you have had with PID 11548. I will be submitting a complaint regarding this issue to our product team so they can look into the matter further. If you would like, I can also help setup an RMA for a replacement. If you wanted to proceed with the RMA, please let me know and I can get that started right away. Apologies again for any inconvenience this may have caused and thank you for your feedback!
Regards,
Gabby Villa
Tech Support Associate
| Was this review helpful to you? | |
|
| | Rating:  (7 out of 10) | Reviewer: Anonymous from New York, NY | 7/5/2014 8:05:52 AM |
| | Fewer advantages over PLA | Pros: Good spool wrap quality, no air bubbles, works as advertised.
Cons: Harder and more brittle than other ABS filaments I have worked with - whatever chemical modifications were used to make it transparent seem to have made it a bit less flexible.
Makes a really annoying buzzing sound when it rubs against things - things like the feed mechanism for my extruder.
This is high-quality filament, but the increased hardness of this variant diminishes the advantages of using ABS over PLA. Still less brittle than most PLA, but I'm going to stick with normal dyed ABS for now. The finished parts are also not really that transparent - more translucent - because all of the tiny ridges from each layer reflect/refract light everywhere.
| Was this review helpful to you? | |
|
| |
|
Monoprice welcomes your feedback. The review you submit will be displayed on the product's review page after it has been verified. It should take about 2-3 business days for this process. Monoprice verifies customer reviews and will publish them after making sure they comply with our review guidelines. You may be contacted by Monoprice regarding your submission.
We will remove reviews that: - Contain profanity or other objectionable content. Should you find any profanity or objectionable content, please contact us at tech@monoprice.com
- Fail to focus on the product. Complaints about shipping or customer service issues will be forwarded to Customer Service to be addressed. Reviews that discuss other products, catalog copy, pricing, or other ancillary issues will be removed.
- Contain advertisements or promotional materials or contain links to external content. Monoprice will also remove reviews submitted by or on behalf of a company with an interest in a competing product.
- Any other content we deem to be inappropriate.
If you believe you may have received a defective unit, remember that Monoprice backs everything we sell with a warranty. Please use our automated return service to request a replacement. Any other issues with your order not directly related to the product itself should be directed to our online customer support chat.
Note: All or part of any product review including the Review Title, "Your Nickname", Rating, Pros/Cons, images and all other parts of the review itself may be used by Monoprice in future marketing campaigns or promotions in any media. Submission of a product review signifies consent that the information you submit may be used at Monoprice's discretion without any further notice or expectation of compensation. You are further representing that any submission is wholly an original creation by you and/or that any portion taken from third party sources have fully cleared for use.
|
|
If you want to write a review, please login first by clicking here.
|
|
|
(40%)
rated by 5 user(s)