Never Miss a Deal.

Distribute up to four HDMI® audio/video source signals to any of two locations using this HDBaseT™ 4x2 HDMI Matrix Switch from Monoprice!

This 4x2 Matrix Switch features four HDMI video inputs and two outputs. One of the outputs is a standard HDMI port for a local connection, while the other is an HDBaseT RJ45 jack for an extended connection. The HDBaseT technology allows for a full bandwidth 10.2Gbps data throughput to distances up to 328 feet over a single Cat5e or Cat6 cable.

The full 10.2Gbps bandwidth support means that this matrix supports all High Speed HDMI functions, including all HDMI 3D video modes, the extended 4K cinema resolution, 32-bit Deep Color, and high-definition compressed lossless audio, such as DTS-HD Master Audio™ and Dolby TrueHD™. The matrix features a built-in, bidirectional infrared (IR) signal extender, which allows you to remotely control devices at the source or destination end of the connection. Additionally, an IR Adapter allows you to use the IR repeater function with the HDMI cable connection.

The HDBaseT extender is capable of transmitting a full-duplex 100Mbps local area network connection alongside the HDMI and IR signals. The matrix has two RJ45 LAN jacks on the back panel, while the HDBaseT Receiver has another two RJ45 LAN jacks. As long as one of the four jacks is connected to the network, the other three will propagate the network connection. This allows you to wire another room for HDMI video, IR remote control repeating, and full internet access, using only a single Cat6 cable!

Note: While the extender will function using unshielded Cat5e cabling, we recommend the use of shielded Cat6 cabling for greater reliability over longer distances. Also note that any cable run through the walls must be rated for in-wall installations.

Features:

• 4x2 HDMI Matrix with 4x HDMI inputs and 2x HDMI outputs
• Full Matrix can simultaneously distribute any input to any or all outputs
• Extends HDMI signals up to 328 feet (100 meters) using a single Cat6 cable
• Extends 100Base-TX network connectivity along with the HDMI video
• Can be daisy chained up to six units deep
• Built-in bidirectional IR repeater
• Supports High Speed HDMI functions, including 3D video

This HDBaseT device is fully compatible with these other HDBaseT extender products from Monoprice:

• PID 10224 HDBaseT Wall Plate Extender
• PID 10225 HDBaseT Extender
• PID 10227 HDBaseT Receiver
• PID 10228 HDBaseT Wall Receiver

Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.

Support Files:

• User's Manual (Sep 19, 2015)
• User's Manual (Sep 11, 2015)
• User's Manual (Mar 15, 2013)

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.