Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Full-Motion Wall Mount (Max 55 lbs, 32 - 55 inch)
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting/Swiveling Wall Mount Bracket from Monoprice!
This mount bracket supports adjustments in three dimensions; it can be swiveled ±60°, can be tilted ±15°, and can be rotated ±5°, for final leveling adjustments. It has undergone extensive safety testing and has been certified by Underwriters Laboratories (UL), which ensures that it will perform safely and reliably.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 100x200 and 400x400, which includes most 32" to 55" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 55 lbs (including the weight of the mount itself). Mounting hardware and cable management clips are included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
- User's Manual (May 20, 2013)
|Minimum VESA||100 x 160|
|Maximum VESA||400 x 400|
|Maximum Weight||55 lbs|
|Minimum Display Size||32"|
|Maximum Display Size||55"|
|Tilt Range||±15 degrees|
|Swivel Range||±180 degrees|
|Rotation Range||±5 degrees|
|Construction||Steel, Aluminum, & Plastic|
|Color||Black & Silver|
|Wall Plate Dimensions||19.3" x 7.6"|
|Front Plate Dimensions||19.5" x 4.3"|
|Built In Level||No|
|Notes:||No logo on mount|
PROS: Solid Mount- Full motion - Easy Installation - All necessary Screws and Parts
CONS: No cons
PROS: Cheap price. Sturdy. Good actuation.
PROS: Great mount at a great price!
CONS: The instructions were not very good, and it wasn't as easy to install as it seemed like it should be.
PROS: Heavy and sturdy
Reasonably easy to install
CONS: Does not easily span between two studs
PROS: Very functional
CONS: I little more than I wanted to spend on a wall mount
PROS: Light weight
Easy to mount
CONS: Back plate on tv-side mount is solid
Sticks out farther than desirable when set flush
Not ideal for 47" with TV mounting screws set low on the rear of television
I am providing a rating of 6 on the documentation and not the quality of the device.
PROS: Good metal gauge, good hardware
CONS: The 180 degree swivel is not correct
This bracket says it is able to handle up to a 47" television. I mounted a 42" Sony LCD on it, and it was nothing but a hassle. First of all, most brackets have holes in the base that can handle many different widths of studs. This bracket did not. I had to drill holes where the studs were, because they happened to be 3" closer together where the television needed to be mounted.
That wasn't a huge problem, but when I got the television mounted, I immediately noticed that it kept tilting down. This is obviously what the allen wrench was for, so I tightened the bolts. Again, it started dropping down. I tightened them again, even harder, and again it tilted. Every time I would tighten the bolts as tight as I could, I would push the television back, and it would tilt. I would magically find that the bolts were still able to tighten again. After tightening the bolts about 10 times, they finally held, kind of. The television would still come down if any pressure was put on it.
After I got the bolts tightened so that the tilt would hold, I looked at how the bracket was behind the television. I noticed that the bracket was bowing, which added to the downward tilt. I would lift the television up from the bottom, and it would never quite straighten out all the way, even though I was holding the weight off of it.
Ultimately, I left the bracket where it was. It didn't appear that it would break, but it was certainly much more flimsy than it looks, and I wouldn't even guarantee that the bracket wouldn't break.
I will not be purchasing another one of these brackets. They are just not well thought out, and I wouldn't trust them to work.
PROS: It is full motion, and unlike some other full motion brackets, the bracket is hidden when the television is pushed toward the wall. It also doesn't look too bad, once installed.
CONS: Vertical tilt is very hard to get to stay stable.
Bracket bends under weight of 42" LCD.
Holes on bracket are only able to span studs if they are perfectly spaced, which almost never happens.