Volume Pricing (Log In to see Member Pricing)
HDBaseT™ Extender Kit
Monoprice is a proud member of the HDBaseT Alliance
Extend your HDMI® audio/video signal to distances up to 328 feet using a single Cat6 cable with this HDBaseT™ Extender from Monoprice!
This Extender uses a new technology, which allows for a full bandwidth 10.2Gbps data throughput over a single Cat5e or Cat6 cable. The full 10.2Gbps bandwidth means that it supports all High Speed HDMI functions, including all HDMI 3D video modes, the extended 4K cinema resolution, 32-bit Deep Color, and high-definition compressed lossless audio, such as DTS-HD Master Audio™ and Dolby TrueHD™.
The extender features a built-in, bidirectional infrared (IR) signal extender, which allows you to remotely control devices at the source or destination end of the connection. For example, normal operation would allow control of the source blu-ray player from the remote TV location.
Additionally, the extender is capable of transmitting a full-duplex 100Mbps local area network connection alongside the HDMI and IR signals. Each extender unit has two RJ45 LAN jacks. As long as one of the four jacks is connected to the network, the other three will propagate the network connection. This allows you to wire another room for HDMI video, IR remote control repeating, and full internet access, using only a single Cat6 cable!
Note: While this extender will function using unshielded Cat5e cabling, we recommend the use of shielded Cat6 cabling for greater reliability over longer distances. Also note that any cable run through the walls must be rated for in-wall installations.
- Extends HDMI signals up to 328 feet (100 meters) using a single Cat6 cable
- Extends 100Base-TX network connectivity along with the HDMI video
- Can be daisy chained up to six units deep
- Built-in bidirectional IR repeater
- Supports all High Speed HDMI functions, including 3D video
Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
This HDBaseT device is fully compatible with these other HDBaseT extender products from Monoprice:
- PID 10224 HDBaseT Wall Plate Extender
- PID 10226 HDBaseT 4x2 HDMI Matrix Switch
- PID 10227 HDBaseT Receiver
- PID 10228 HDBaseT Wall Receiver
- User's Manual (Mar 19, 2013)
- Manual de Usuario (Español) (Apr 17, 2015)
- Specification Sheet (Jul 30, 2014)
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
|Supported Video||High Speed HDMI with HDCP 1.2|
|Supported Resolutions||1080p, 1080i, 720p, 576p, 576i, 480p, 480i|
|Color Support||up to 12-bit/channel Deep Color (36-bit total)|
|Audio Support||LPCM, Dolby AC3, DTS 7.1, DSD|
|Bandwidth/Data Throughput||up to 10.2Gbps|
|Operating Temperature Range||+5 ~ +131°F (-15 ~ +55°C)|
|Operating Humidity Range||5 ~ 90% RH (no condensation)|
Included in the Package:
- 1x HDMI extender transmitter (Tx)
- 1x HDMI extender receiver (Rx)
- 2x AC adapter (5VDC/2A)
- 1x IR transmitter bulb
- 1x IR receiver bulb
- 1x User's manual