HDMI® + Ethernet and IR Extender Using Cat5e or CAT6 Cable - Extend Upto 328ft
    Product # 8123
    HDMI® + Ethernet and IR Extender Using Cat5e or CAT6 Cable - Extend Upto 328ft
    Product # 8123
    $225.74
    Quantity:
    In Stock This item will ship on 2/8/2016 if ordered within 2 days 19 hours 20 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $225.74
    Qty: 2-9 $221.95
    Qty: 10-19 $218.16
    Qty: 20-49 $214.37
    Qty: 50+ $210.59

    To see and take advantage of our volume pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    HDMI® + Ethernet and IR Extender Using Cat5e or CAT6 Cable - Extend Upto 328ft

    This all-in-one HDMI® extender not only handles high-speed 1080p HDMI video, with high-resolution audio, but it also transmits the IR signal and your ethernet over a single Cat5e/Cat6 cable at distances up to 100 meters (328 feet)!

    This HDMI extender is able to send High-Speed (1080p) HDMI signals to distances up to 100 meters (328 feet), with full 10.2 Gbps bandwidth, using only a single Cat5e/Cat6 cable. It supports 3D video modes and high-resolution audio, such as DTS Digital, Dolby Digital, DTS-HD Master Audio™, and Dolby TrueHD™.

    It also includes and IR back-channel, so you can control your equipment from the destination room. The IR receiver and transmitter are large, wide-directional units, so the receiver can handle inputs from various angles and the transmitter can send the IR signal to several pieces of equipment.

    The HDMI Sender and Receiver units each feature a three-port Ethernet hub. Connect a cable from your wired router to one of the hub ports and the other five can be used to connect PCs and other internet capable devices. The ethernet signal can be transmitted at a full 100 Mbps alongside the HDMI and IR signals.

    The Sender and Receiver units can be fixed to a flat surface (wall, table, inside a cabinet, etc) using the included L brackets (4 each) and screws (8 each, 2 per bracket). Screws or bolts needed to fix the brackets to your surface are not included. Both the Sender and Receiver require 5 VDC power and a pair of AC Adapters are included.

    There simply is no better way to extend your high-speed 3D HDMI signal over long distances. With the inclusion of IR and ethernet support, this unit give you a flexibility and capabilities that have been previously unavailable!

    Features:

    • Supports HDCP
    • Uncompressed HDMI signal
    • Enables HDMI 10.2 Gbps and 100 Mbps Ethernet in parallel over a single 100m Cat5e/6 cable
    • 340 MHz/3.4 Gbps per channel (10.2 Gbps all channel) bandwidth
    • 1080p / 60 Hz with 48-bit pixels
    • 3D pass-through
    • Supports uncompressed audio such as LPCM
    • Supports compressed audio such as DTS Digital, Dolby Digital, DTS-HD Master Audio and Dolby TrueHD
    • Three standard Ethernet ports with switching capabilities on each unit. There is no difference between the three and any type of connection topology is permitted
    • Built-in single-band IR extender function allows IR remote control of source devices from remote viewing location by sending IR commands received near the Display back to the source devices

    For best results, we strongly recommend the use of a Cat6 cable to connect the Sender and Receiver units.



    Support Files:



    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

    Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

    Specifications
    Supported Video Formats HDMI® with 3D
    Supported Resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
    Supported Audio Formats LPCM, Digital DTS, Dolby DTS-HD, Dolby True-HD
    Video Amplifier Bandwidth 340 MHz / 3.4 Gbps per channel (10.2 Gbps total)
    Deep Color Support 16-bits per channel (48-bits total)
    Ethernet Bandwidth 100 Mbps
    Ethernet Wiring Standard IEEE-568B
    Ethernet Hub Ports 3 per device (6 total)
    Ethernet Topology Any
    Maximum Transmission Distance 100 meters (328 feet)
    Input Power Requirement 5 VDC, 2A
    Power Consumption 5W (max)
    Power Adapter Input 100-240 VAC, 50/60 Hz, 0.5A Max
    Extender Certification FCC, CE, RoHS
    Power Adapter Certification FCC, CE, RoHS, UL (Canadian and US)
    Operating Temperature Range +32°F~+158°F (0°C~70°C)
    Maximum Storage Temperature +248°F (+120°C)
    Sender/Receiver Dimensions 3 31/32" wide, 4 1/32" deep, 31/32" thick
    Sender/Receiver Dimensions 3 31/32" wide, 4 1/32" deep, 31/32" thick
    IR Unit Dimensions 2 3/4" long (including cord tail) by 1 9/16" wide by 1" tall
    AC Adapter Dimensions 3 5/16" long (including cord tail), 1 1/16" wide, 2 13/16" tall


    Included in the Box:

    • 1x HDMI®/Ethernet Sender Unit
    • 1x HDMI®/Ethernet Receiver Unit
    • 1x IR Receiver with 49" cord
    • 1x IR Emitter with 48" cord
    • 2x AC adapters rated for 5V DC and 2A, with 44" cords
    • 4x L mounting brackets
    • 8x Mounting bracket screws
    • 1x User manual


    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

    Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

    30 Reviews

    75.33% of the reviewers recommend this product

    ADD YOUR REVIEW

    Love these things

    • snowbomb101,
    •  Maple Grove, MN 
    • 1/24/2016 10:19:01 PM

    Pros: Does exactly what it is supposed to do. Simple easy to interpret status lights. Lightweight and fairly compact.

    Cons: Have on rare occasions needed to unexpectedly cycle the power to get these to work after periods without use.

    I have three of these now, one of which I have had for at least a year and they are working flawlessly. I am using these throughout my house as I have all my a/v equipment centrally located in my basement. These are transmitting all forms of audio and video without a glitch. I believe I have experienced excessive latency when using the Ethernet and HDMI extender although I don't have data to support this. I strictly use these for the HDMI extension function. I have zero experience with the IR senders and receivers.

    Was this review helpful to you?

    replacement parts?

    • Mike,
    •  Virginia Beach, VA 
    • 3/14/2015 6:23:07 PM

    Pros: Overall very good. Fast setup and very little problems out of the box. These work well on CAT5e UTP. Great functionality overall. 3 LAN ports per end is very helpful....

    Cons: One way IR. Failure rate. When failure is within warranty period Monoprice is receptive and does a good job with replacements - although they used to offer AWR and have now resorted to requiring defective units shipped in and bench tested before sending replacements. This is a problem for customers - causing extended down times.

    We have used many of these for our customers. We have experienced about a 10% failure rate at this point. In most cases it appears the receiver end is the failure unit. It would be very nice to offer the receiver and transmitter individually. The warranty is one year and we are seeing about half failures beyond the warranty period. I would much rather pay for only the unit needed to get pair back up and running vice buy a whole new set.

    Was this review helpful to you?

    PID 8123 and PID 8122

    • Jaspal,
    •  Edmonton, AB 
    • 1/12/2015 9:18:25 PM

    Pros: The products worked fine

    Cons: The products did not last long

    I paid lots of money to buy these products, however, I'm disappointed to see them fail. These products needs to last a bit longer.


    by Monoprice Administrator
    Hello Jaspal,

    Thank you for your review and truly sorry to hear about the issues experienced with PID 8123. If I may ask, what problems are you running into exactly when trying to use this extender? Are the units powering on at all? Also, what is the order number for this purchase? Please let me know so we can look into this further. Thank you in advance!

    Regards,
    Gabby Villa
    Tech Support Associate

    by Jaspal
    Thanks for your reply. All boxes (receiver/sender) have a power light on, however, the link and data light is not coming on. Hence, products failed to work. I don't have any invoices for these products.

    Thanks,
    Jaspal

    by Monoprice Administrator
    Hi Jaspal,

    Thank you for the response! Please provide me with a bit more information just so we can investigate this further. How long did the extender work before giving out and were there any changes made to the setup prior to them failing? What are the lengths and gauges (AWG) of the HDMI cables in use here? What about length and type of Cat cable? Also, what devices are you trying to connect with this extender? Have you tried other devices to see if the issue persists?

    If I may ask, what was the email address used to purchase the units? I can try finding the order that way. Thank you!

    Regards,
    Gabby Villa
    Tech Support Associate
    Was this review helpful to you?

    Not reliable enough for corporate use

    • Anonymous,
    •  El Segundo, CA 
    • 11/18/2014 1:27:26 PM

    Pros: Good value while it's working. I typically used it up to 200' with Cat6a with no connection problems.

    Cons: Receiver died out of warranty with very little use

    I have 3 HDbaseT extenders from Monoprice and 2 of them have died at the same time. They sit on a shelf until needed for corporate jobs. On this one the receiver no longer has link or HDCP leds lit. Tried cables, sources, monitors, power supplies and it's dead. Out of warranty of course. Fortunately they're inexpensive enough to buy two sets to have a backup.

    Was this review helpful to you?

    HDMI® + Ethernet and IR Extender

    • Rick B,
    •  Santa Rosa, CA 
    • 10/29/2013 10:38:31 AM

    Pros: Works well when it was working

    Cons: Unit failed with in two weeks after deployment

    I have noted from a few reviews that this device as a high failure rate. But purchased it anyway. I've never seen "personally" any Monoprice cable, or device fail until now. It fit my needs, then it failed.


    by Monoprice Administrator
    Hello Rick,

    Thank you for your review and my apologies for the issues you have experienced with PID 8123. Unfortunately, it sounds like you may have received a defective product.
    Now if you'd like, I can help setup an RMA for a replacement. If you would like me to proceed with the RMA, just let me know and I can get it started right away. Sorry again for the trouble and hope this helps!

    Regards,
    Jonathan Arteaga
    Tech Support Associate
    ------------------------------------------------------------------

    by Rick B
    Thanks for getting back to me. I would like an RMA to replace this device.

    Again, Thank you

    Rick Bowen

    by Monoprice Administrator
    Hello Rick,

    Thanks and no problem at all, happy to help! Now your RMA # is: RMA990354762. A returns department representative will contact you by E-mail which will include an RMA # along with instructions to follow as well as doing further troubleshooting with you as necessary. The E-mail should arrive within 24 hours. I apologize for the inconvenient experience you've faced while using our products. However, thank you very much for your patience.

    *If you have any questions regarding shipping, RMA confirmation number, or RMA confirmation email, as well as RMA return status, please send your inquiries directly to the RMA dept at returns@monoprice.com and please include your RMA# in the email as reference. Sorry again for the trouble and hope this helps!

    Regards,
    Jonathan Arteaga
    Tech Support Associate
    ------------------------------------------------------------------


    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART