5ft IR Extender Cable (Receiver)
    Product # 8060
    5ft IR Extender Cable (Receiver)
    Product # 8060
    $3.07
    Quantity:
    In Stock This item should ship tomorrow (2/9/2016) if ordered within 22 hours 50 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $3.07
    Qty: 2-9 $2.95
    Qty: 10-19 $2.83
    Qty: 20-49 $2.71
    Qty: 50+ $2.59

    To see and take advantage of our volume pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    5ft IR Extender Cable (Receiver)

    This IR Receiver Extender cable is a receiver device for use with infrared remote controls. It plugs into a source device or IR extender and serves as the IR sensor for remote control input. It is compatible with the HDMI® extender wall plates from Monoprice, PIDs 8008 and 8201.



    Support Files:



    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    Specifications
    Model 8060
    Dimensions 0.7" x 0.5" x 1.2"
    Connector Type 3.5mm "stereo" plug
    Cord Length 55"

    94 Reviews

    78.62% of the reviewers recommend this product

    ADD YOUR REVIEW

    5 ft IR Extra Cable

    • Michael Mitchell,
    •  Fayetteville, NC 
    • 1/15/2016 6:43:53 PM

    Pros: Great price, works perfect, fast shipment

    Cons: NONE

    Ordered 3 of these for my Time Warner digital boxes so I could hide the boxes. Worked so well I ordered 2 more. Great price & fast delivery.

    Was this review helpful to you?

    Bought 6 of these receiver and none of them worked

    • kaigim,
    •  Plano, TX 
    • 1/4/2016 4:40:57 PM

    Pros: No pros

    Cons: All cons

    I bought 6 of these receivers so that I can use them to connect to the connecting block which had 6 connections for emitters. None of these IR receivers worked. Nothing happens when I connect them to the block. Just the blue light (for IR confirm) lights up and then nothing happens. (No signal detected when I used the remote control to send signal)


    by Monoprice Administrator
    Hello Kaigim,

    Thank you for your review, and I am truly sorry for the inconvenience you've encountered with the cable. You may have gotten a bad batch, or if you are unsatisfied with the item, please let me know so I can assist you with a return. Thank you!

    John Lingo
    Tech Support
    Was this review helpful to you?

    Great product

    • Ryan F,
    •  Angus, ON 
    • 12/15/2015 4:49:51 PM

    Pros: Small, cheap decent length cord.

    Cons: Two sided tap doesn't stick very well

    Nice and small, can't even see it. Great price too.

    Was this review helpful to you?

    Did not work with my Denon AVR-X4000

    • Tony,
    •  Chicago, IL 
    • 12/4/2015 10:18:11 AM

    Pros: inexpensive

    Cons: not compatible with everything.

    Plugged it in didn't work, works with my comcast cable box., but not the receiver. The input is not a dual frequency cause i checked with Denon support.


    by Monoprice Administrator
    Hello Tony,

    Thank you for your review and sorry to hear of the issues you have experienced with PID 8060. The 8060 would use a single band frequency. It sounds like the cable box is single band as well since it works with it but looking into Denon receivers users state that most Denon receivers are dual band. I know Denon support stated that it is not a dual band frequency which would mean it is a single band frequency. It may just be a compatibility issue if that is the case or the receiver may possibly use a dual band frequency. I usually recommend when extending IR to use dual band for it is backwards compatible with single band. If you would like I can set up an RMA for a refund on the 8060 if you are not satisfied with the item. Just let me know and I can get that set up.

    Regards,
    Mark P.
    Tech Support Associate

    Was this review helpful to you?

    Not a 12 V IR receiver

    • Mina,
    •  ,  
    • 11/12/2015 10:08:32 AM

    Cons: Not a 12 V

    bought it to connect it to ATON DLA speaker selector system., it requires direct connection (wires instead of 3.5mm jack), i searched all over the internet for data sheet but couldnt find one, instead i got my 12 V source and started connecting all sort of combinations to make it work with no Luck, apparently this does not run on 12 V as claimed, also you will not find any details for it online.


    by Monoprice Administrator
    Hello Mina,

    Thank you for your review and my apologies for any inconvenience. PID 8060 is intended to be used with a single band IR device that utilizes the 3.5mm connection to connect the cable. If I may ask, was the cable cut to connect it to the IR wire terminals of your ATON DLA Speaker Selector? Also, PID 8060 would not be a 12V cable. I do not see any indication that PID 8060 is a 12V cable. Did you happen to remember where you had seen that stated?

    Regards,
    Mark P.
    Tech Support Associate

    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART