Screen Protective Film w/ High Transparency Finish for HTC EVO 4G
    Product # 8372
    Screen Protective Film w/ High Transparency Finish for HTC EVO 4G
    Product # 8372
    In Stock This item should ship today (2/8/2016) if ordered within 5 hours 10 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $0.23
    Qty: 2-9 $0.23
    Qty: 10-19 $0.23
    Qty: 20-49 $0.23
    Qty: 50+ $0.23

    To see and take advantage of our volume pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Screen Protective Film w/ High Transparency Finish for HTC EVO 4G

    Protect the screen on your HTC Evo 4G from scratches and fingermarks with a Monoprice protective screen film. This screen protector is sized to perfectly fit your HTC Evo 4G and comes with a High Transparency finish, which allows the full spectrum of colors to shine through in all their original glory.

    While the film will adhere to the screen, it will not leave any resins or residue when removed. The packaging includes a lint-free cleaning cloth, to ensure that the screen is clean before applying the film, and an installation card, to help remove any small air bubbles that may occur during application.

    HTC Evo 4G not included!

    Package includes:

    • Protective screen film
    • Lint-free cleaning cloth
    • Installation card

    How to apply the Screen Protective Film to your phone:

    1. Please turn the device off. Clean the surface of the touch screen with the cloth provided in a dust-free environment. Please do not use cleaning agents.
    2. Start by folding down the backing layer. Avoid touching the back of the film, which may leave your fingerprints on it, peel off about an inch. Make sure the adhesive side is facing down.
      Note: Removing the backing all at once may cause static that could attract unwanted dust.
    3. Apply the film with adhesive side toward the screen. Align the screen protector with the screen edge and place it in position by applying light pressure to the film at the point of contact (front side).
      Work your way across the screen, slowly pulling the backing layer off.
      Be sure not to leave any bubbles on the screen surface as you go. If you have any air bubbles when finished, see below.
    4. If you notice bubbles as you go, pull back and retry. If it's caused by dirt, attempt to lightly flick it off or use the sticky side of a piece of tape, (clothes lint roller tape is best).
      Use the installation card provided to smooth out any bubbles not caused by dirt. Apply light pressure evenly across the surface until the film is completely adhered. If no dirt is present, very small air bubbles may dissipate in a few days.

    4 Reviews

    80% of the reviewers recommend this product

    • Anonymous,
    •  Raleigh, NC 
    • 9/30/2012 7:40:32 AM

    Good value for money.

    Was this review helpful to you?

    HTC Evo Screen Protectors

    • dkramer186,
    •  Lake Havasu City, AZ 
    • 3/29/2012 7:24:43 AM

    Pros: Fits well, long lasting

    Cons: The second layer that you peel off after placing on the phone does not come off with the attached tab. This makes it difficult to remove and can also peel the protector off the phone which makes it not seal back cleanly.

    Was this review helpful to you?

    great screen protectors

    • Nealiii,
    •  Flower Mound, TX 
    • 12/30/2011 12:26:00 PM

    Pros: Very clear, easy to install. I've also installed one on my iPhone4. It finally needs to be replaced after a year.

    Cons: Not impervious to scratches, but I'd rather have a crystal clear screen instead of the filmy looking ones.

    Be sure to install these in a very clean room. Let the dust settle for a few minutes before starting.

    Was this review helpful to you?

    No Installation Card Included

    • Nuff_Said,
    •  Franklin, OH 
    • 9/9/2011 1:59:20 PM

    Pros: Looks good when applied as long as you don't get ANY dust or lint on the screen.
    Very good price.

    Cons: Did not include "Installation Card" as advertised.
    Any small bit of dust or lint creates a small air bubble which cannot be removed.

    Purchased 4 of these (since they were so cheap) because I knew I would mess up on at least 1 of them. Sure enough, got several specks of dust on the film prior to applying it and could not remove them from the film. Started again and only had 1 dust particle which I think I can live with. If I do try and install another one in the future, I will probably peel back the protective film a little bit at a time. Maybe this will help keep some of the dust out.

    None of the ones I purchased came with the Installation Card as advertised. I think this would have made installation much easier if it had been included.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout