Chat Now
Screen Protective Film w/ Matte Finish for Motorola Atrix
In Stock This item should ship today (11/26/2015) if ordered within 28 minutes

0.18 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

Screen Protective Film w/ Matte Finish for Motorola Atrix

Protect the screen on your Motorola Atrix from scratches and fingermarks with a Monoprice protective screen film. This screen protector is sized to perfectly fit your Motorola Atrix and comes with a Matte finish, which reduces glare and reflections, yet allows the full spectrum of colors to shine through in all their original glory.

While the film will adhere to the screen, it will not leave any resins or residue when removed. The packaging includes a lint-free cleaning cloth, to ensure that the screen is clean before applying the film, and an installation card, to help remove any small air bubbles that may occur during application.

Motorola Atrix not included!

Package includes:

  • Protective screen film
  • Lint-free cleaning cloth
  • Installation card

How to apply the Screen Protective Film to your phone:

  1. Please turn the device off. Clean the surface of the touch screen with the cloth provided in a dust-free environment. Please do not use cleaning agents.
  2. Start by folding down the backing layer. Avoid touching the back of the film, which may leave your fingerprints on it, peel off about an inch. Make sure the adhesive side is facing down.
    Note: Removing the backing all at once may cause static that could attract unwanted dust.
  3. Apply the film with adhesive side toward the screen. Align the screen protector with the screen edge and place it in position by applying light pressure to the film at the point of contact (front side).
    Work your way across the screen, slowly pulling the backing layer off.
    Be sure not to leave any bubbles on the screen surface as you go. If you have any air bubbles when finished, see below.
  4. If you notice bubbles as you go, pull back and retry. If it's caused by dirt, attempt to lightly flick it off or use the sticky side of a piece of tape, (clothes lint roller tape is best).
    Use the installation card provided to smooth out any bubbles not caused by dirt. Apply light pressure evenly across the surface until the film is completely adhered. If no dirt is present, very small air bubbles may dissipate in a few days.

4 Reviews

92.5% of the reviewers recommend this product


Excellent protector

  • Tim,
  •  Keizer, OR 
  • 9/15/2011 1:41:55 PM

Pros: -less finger-against-screen friction
-less reflective
-does not attract finger/face grease
-nice overall feel
-easy to apply
-great for phone gamers

Cons: -some static/fuzz on bright screens (especially white backgrounds)

This protector really exceeded my expectations. It was very simple to put on, though as one reviewer advised, you should start by lining up the top holes. I'd add that you should peel the backing off slowly while progressively pushing down on it with the edge of a credit card as you peel. Once on, the feel of it is fantasticso much better than the glass that always produces a lot of friction when I try to move my finger. Unlike other reviewers, I did not notice any decrease in the sensitivity of my screen if anything, it feels more sensitive because it's not so difficult to move my fingers on it. Also, it doesn't leave the shmear from face and fingers nearly as much as glass or glossy protectors. This protector is especially nice for people who like to play games on their phonesI had the best game of fruit ninja I've ever played after installing this. Also great for emulated games if you're using on screen controls.

Was this review helpful to you?
  • Joe,
  •  harrisburg, PA 
  • 9/6/2011 6:31:11 PM

Pros: Great price, Anti glare, anti smudge.

Cons: Reduced screen sensitivity, does not line up perfect.

The price is great and it definitely does its job of anti glare/anti smudge. I did have 2 problems with the product though. It greatly reduced the screen sensitivity and did not line up perfectly (buy 2 just in case). When you put the protector on start at the top to line it up. I made the mistake of lining it up at the bottom and it covered up the speaker entirely... other than that it is a great screen protector.

Was this review helpful to you?
  • Joe,
  •  harrisburg, PA 
  • 9/2/2011 8:32:54 PM

Pros: Great price especially for a matte finish.

Cons: Reduces touch screen responsiveness more than others I have used. Did not line up 100% to the front camera and speaker at top. Had to scrap one and try again.

Overall it was good quality and did its job. I bought 2 because I have had issues with other screen protectors (just the nature of the product). When you put this on, line it up at the top (front camera and speaker) and you wont have any issues. I made the mistake of lining it up with the mic at the bottom first.... Can't beat the price. I ended up having my whole phone replaced at att though and they gave me one of their matte finish screen protectors (since I had one already) and I have to say I like it much better. Does not affect screen responsiveness nearly as much.

Was this review helpful to you?

Good if you like Matte finish

  • Bob,
  •  San Francisco, CA 
  • 7/26/2011 9:46:02 PM

Pros: Goes on REALLY smooth
Feels REALLY nice
Anti finger grease
Almost free!!!
MONOPRICE is my best friend

Cons: Despite being the best matte finish protector I've seen, still 'fuzz' the screen
Not an absolutely perfect fit, but very good.

This is probably the best matte finish screen protector I've seen. I would give it a 10 except that I now know that I don't like matte. All the matte finishes kinda 'fuzz' the screen a bit but this one does so less than almost any other matte protector I've seen.

Was this review helpful to you?
Tax and shipping will be calculated at checkout