Screen Protective Film w/Matte Finish for iPhone® 4/4S
Protect your iPhone® 4's screen from scratches and fingermarks with a Monoprice protective screen film. This screen protector is sized to perfectly fit your iPhone 4 or 4S and comes with a Matte finish, which reduces glare and reflections, yet allows the full spectrum of colors to shine through in all their original glory.
While the film will adhere to your iPhone 4's screen, it will not leave any resins or residue when removed. The packaging includes a lint-free cleaning cloth, to ensure that the screen is clean before applying the film.
Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
How to apply the Screen Protective Film to your phone:
Please turn the device off. Clean the surface of the touch screen with the cloth provided in a dust-free environment. Please do not use cleaning agents.
Start by folding down the backing layer. Avoid touching the back of the film, which may leave your fingerprints on it, peel off about an inch. Make sure the adhesive side is facing down. Note: Removing the backing all at once may cause static that could attract unwanted dust.
Apply the film with adhesive side toward the screen. Align the screen protector with the screen edge and place it in position by applying light pressure to the film at the point of contact (front side).
Work your way across the screen, slowly pulling the backing layer off.
Be sure not to leave any bubbles on the screen surface as you go. If you have any air bubbles when finished, see below.
If you notice bubbles as you go, pull back and retry. If it's caused by dirt, attempt to lightly flick it off or use the sticky side of a piece of tape, (clothes lint roller tape is best).
Use the installation card provided to smooth out any bubbles not caused by dirt. Apply light pressure evenly across the surface until the film is completely adhered. If no dirt is present, very small air bubbles may dissipate in a few days.
Screen Protective Film w/Matte Finish for iPhone® 4/4S
Question: How do I put on the screen protector?
Answer: Step 1) Align the protective film with your device’s screen. We recommend aligning to the top first, then the sides, and finally the bottom. Check the overall alignment as carefully as possible prior to placing the film.
Step 2) Carefully remove the film from its protective backing layer.
Step 3) Using your thumbs and fingertips, apply the film to your device’s screen and work until the film lies smoothly on your device’s screen. If the alignment of your film is not correct, simply peel it off and re-apply.
Step 4) For securing problematic corners and edges, apply pressure to the tabs and flaps by holding them against the palm of your hand for 30 seconds to 1 minute. This process may need to be repeated several times, but will help secure difficult pieces.
**If you are having an issue with bubbles on the screen protector** For applying the screen protector with the least amount of bubbles possible we recommend doing it in the bathroom while running a hot shower. The steam will pull any dust particles to the floor then you can apply the screen protector and smooth it out with a credit card. If the protector is being significantly problematic you can pop the air bubble
Pros: Good screen cover, great price. I like the matte look.
Just as good as much more expensive screen covers.
Was this review helpful to you?
Rating: (1 out of 10)
Reviewer: desg24 from Los Angeles, CA
8/13/2013 5:10:58 PM
Not worth the cheap price
Pros: They come with a lint cloth
Cons: Air bubbles, not clear looking, tears easily
Well, you get what you pay for. I bought 3 and I went through all 3 of them in 20 minutes. I could not get the air bubbles out and the protector screen isn't clear looking at all. It looked as though it had fingerprints all over it even after wiping it with the lint cloth. Once I put my case on my phone, more air bubbles appeared. I consider myself a semi-pro at these difficult screen protectors but I think these are just not very well made and not worth their low price at all and you're better off shelling out the $16 at the Apple store for theirs. Also, I've only had my screen on for 4 days and it has already received a scratch. If air bubbles don't bother you, then I guess these may work for you.
by Monoprice Administrator Hello desg24,
Thank you for your review and my apologies for the issues you have experienced with PID 7095. Now for applying the screen protector with the least amount of bubbles possible, we recommend doing it in the bathroom while running a hot shower. The steam will pull any dust particles to the floor then you can apply the screen protector and smooth it out with a credit card. If the protector is being significantly problematic you can pop the air bubbles. Sorry again for the trouble and hope this helps!
Regards, Jonathan Arteaga Tech Support Associate ------------------------------------------------------------------
by desg24 I did use a credit card to smooth out the bubbles. It may be helpful to post these helpful hints with the product description. I usually have no problem doing this in my kitchen with lots of light.
Monoprice welcomes your feedback. The review you submit will be displayed on the product's review page after it has been verified. It should take about 2-3 business days for this process. Monoprice verifies customer reviews and will publish them after making sure they comply with our review guidelines. You may be contacted by Monoprice regarding your submission.
We will remove reviews that:
Contain profanity or other objectionable content. Should you find any profanity or objectionable content, please contact us at firstname.lastname@example.org
Fail to focus on the product. Complaints about shipping or customer service issues will be forwarded to Customer Service to be addressed. Reviews that discuss other products, catalog copy, pricing, or other ancillary issues will be removed.
Contain advertisements or promotional materials or contain links to external content. Monoprice will also remove reviews submitted by or on behalf of a company with an interest in a competing product.
Any other content we deem to be inappropriate.
If you believe you may have received a defective unit, remember that Monoprice backs everything we sell with a warranty. Please use our automated return service to request a replacement. Any other issues with your order not directly related to the product itself should be directed to our online customer support chat.
Note: All or part of any product review including the Review Title, "Your Nickname", Rating, Pros/Cons, images and all other parts of the review itself may be used by Monoprice in future marketing campaigns or promotions in any media. Submission of a product review signifies consent that the information you submit may be used at Monoprice's discretion without any further notice or expectation of compensation. You are further representing that any submission is wholly an original creation by you and/or that any portion taken from third party sources have fully cleared for use.
If you want to write a review, please login first by clicking here.