Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Ceiling Bracket for 30inch above TV - BLACK
This Ceiling Bracket allows you to convert an HDTV wall mount into a Ceiling Mount. This bracket is compatible with the following wall mounts:
PID 4117 : Adjustable Wall Mount Bracket for LCD Plasma (Max 165Lbs, 23~36inch)
PID 3900 : Adjustable Wall Mount Bracket for LCD Plasma (Max 165Lbs, 30~63inch)
PID 4174 : Adjustable Wall Mount Bracket for LCD Plasma (Max 165Lbs, 30~63inch)
Wide Mounting holes on bracket that attaches to ceiling is 5.25" x 4"
Bracket is 3ft long and extends to 5 ft. long 1 1/2 " steel pipe.
IMPORTANT: Mount comes with anchors designed for stone, concrete and hollow block. No wood mounting solutions are provided. You are responsible for providing your own solutions to mounting to wood beam ceilings. We apologize for any inconvenience.
IMPORTANT! Please note that the screen sizes listed are only approximations. The VESA pattern used to mount the display and the weight of the display are the primary indicators of whether a given display and mount are compatible. Please check the VESA pattern listed in your product manual to ensure that this mount will work with your display.
- User's Manual (Aug 30, 2011)
|Maximum Weight||176 lbs|
|Minimum Display Size||23"|
|Maximum Display Size||N/A|
|Swivel Range||360 degrees|
|Ceiling Plate Dimensions||5.25" x 4.0"|
|Front Plate Dimensions||N/A|
|Built In Level||No|
|Notes:||Use with PIDs 4117, 3900, or 4174|
PROS: Love them, they are easy to install, price is uncomparable to any other site on line. Quality is top notch. I was paying at least double for the same mount. Service excellent. Have not had any problems with any orders from MonoPrice. My company will continue to buy from MonoPrice
I knew I would have to shorten the mount when I ordered it. I made quick work of shortening it with an air cut off tool and a drill press. You could do it with a hack saw and hand drill, although the tubing is thick enough you'll get a work out.
I also needed so span some structure (I used 2 pieces of 2x4 on edge) between the trusses to carry the weight. By cutting the hole for the wiring and electrical I was able to measure and pre-position the 2x4s before ever going into the attic. I also stuffed all the tools I would need up through that hole. That way I was able to do the whole job with only one trip across the trusses to work on it.
Fishing the cables through the tube was a challenge because the hole in the side is rather small. I had to use a small dental pick type tool to pull the cables out the hole and the connectors on the HDMI and power cord made for a very tight fit. This would probably be easier if you fed the cable in the bottom of the mount and out the top but I'd already run them into the attic from the shelf where the components are located.
CONS: Too long for standard residential ceiling - you should have your supplier make one that is shorter.
Opening in side of tube for cable is pretty small. Tough to fish the power cord and HDMI connector through there.
Be aware that the down pipe will flex because the TV hangs off the side. My 80lb. TV ended up with a minimum down angle of about 5 degrees (even with the shortened pipe)
I knew when I purchased I'd have to shorten it. I made quick work of it with an air cut off tool and a drill press. Could use hacksaw and hand drill but the tubing is thick enough to make it a bit of a work out.
Of course where I wanted it on the ceiling was between 2 trusses. Pretty easy to do by spanning between the trusses with a couple pieces of 2x4 on edge and lag screwing them into the trusses.
Fishing the cables through the tube was tough because the hole in side of the tube is small for the power and HDMI connectors. It'd probably be easier if you started at the bottom and fed the cables up, but I'd already run my stuff through the attic. A little tugging with a dental pick did get the connectors through the hole. The RG-6 and TOSLINK are small enough they weren't a problem.
Because the TV hangs off the side the tube is going to curve and you will not get a horizontal install. With my 80lb TV this results in about a 5 degree down angle with the 3900 set to horizontal. With the full length tube it'd be more. Not a problem for my installation because we wanted some down angle. If you want true horizontal this is not the mount to use.
PROS: Outstanding price.
CONS: Too long for residential ceilings
Opening in side of pipe for cables is a bit small.
PROS: Sturdy, streamlined, professional-looking.
CONS: Was a little too long for my particular needs, but I modified and it still looks professional and works great!
PROS: Easy to install, sturdy construction
CONS: Received 1 (out of 6) with a bent swivel bolt, only tack welded to the top plate (but the tube is also flared).
PROS: Worked as advertised
PROS: Easy installation, clear instruction with all the hardware provided, great and will buy again.
I had a minor beef with the giant footprint of the bracket's mounting plate. The mounting plate is VERY wide (like 4+ inches), which makes it fairly impractical to mount on the ceiling of the average house - the 4 mounting holes will never line up on a 2x4 stud. As a workaround, I had to put up a 1" thick by 24" long board, countersink the plate's mounting bolts, bolt the bracket to the board, and then screw the board into the ceiling studs with 10 screws. Eh... it did the trick, but could have been a lot better.
On a side note... maybe it's just the fact that I'm a dumbass, but I saw the product listing to mean "30-inch or above sized televisions". Instead, the extension itself is a minimum of 30 inches.
PROS: Great price for what I needd
CONS: The braket was to long for my application but purchaed it anyway