Low Profile 7.5 lb. Capacity Speaker Wall Mount Brackets (Pair), Black
    Product # 6979
    Low Profile 7.5 lb. Capacity Speaker Wall Mount Brackets (Pair), Black
    Product # 6979
    In Stock This item should ship tomorrow (5/6/2016) if ordered within 17 hours 22 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $3.88
    Qty: 2-9 $3.77
    Qty: 10-19 $3.59
    Qty: 20-49 $3.47
    Qty: 50+ $3.36

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Low Profile 7.5 lb. Capacity Speaker Wall Mount Brackets (Pair), Black

    Easily mount your satellite speakers on your wall with this Speaker Wall Mounting Bracket set from Monoprice!

    These brackets are designed to mount small satellite speakers with a single-bolt mounting system. Each bracket can support a speaker weighing up to about 7.5 lbs (3.5 kg). Each bracket can be adjusted for tilt and swivel, so you can point each speaker to the proper angle for the optimum audio experience.

    The brackets can be mounted to wooden stud or brick/concrete/hollow-block walls and includes the hardware necessary for either type of mounting option. Additionally, the kit includes M5x12 screws for mounting the speakers to the brackets. Each speaker mounts about 3" from the wall.

    Support Files:

    131 Reviews

    86.18% of the reviewers recommend this product


    Nice Stands

    • Rick,
    •  Gurnee, IL 
    • 4/9/2016 11:08:53 AM

    Placed these on my dry wall and are a perfect fit!

    Was this review helpful to you?

    Slim and do the job

    • 82jax,
    •  ,  
    • 3/19/2016 10:13:13 AM

    Pros: 5 minute install and setup at most. Attractive versus the robot arm looking ones.

    Cons: Would be nice if they were offered in a 5 or 3 pack as I really needed three (center speaker) and already have two stands. =/

    These mounts are exactly how shown in the photo. When they arrive, they're already put together, a screw at the top of the mount releases the actual mount bracket to allow you to use them as a template to drill your holes in the wall and use the mounting screws provided accompanied with the wall mount inserts. Once the mount is attached to the wall, it is recommended that you mount the speaker to mount prior to sliding it on (it will be easier). There are 4 total speaker screws provided and two holes on each bracket. The upper - oblong, lower set size, mounted my speakers (bose) using the oblong to adjust and center it easily. Not both holes were used, the screws are exactly the thread count needed. No rethreading occurred when installed. Slid mount over bracket replaced the top mount screw, adjusted and done. It took me long to type this up than to actually install the mounts. Have been using them for about two weeks now and no complaints thus far. Now, where to find some slimline wire hiders to hide my black cords running down the white walls?

    Was this review helpful to you?

    Needs appropriate screws!

    • Anonymous,
    •  Falls Church, VA 
    • 2/26/2016 6:07:33 AM

    Good price but, seriously, this doesn't have the screws to attach speakers...

    Was this review helpful to you?

    Good Option

    • Dave,
    •  Delaware, OH 
    • 12/21/2015 6:33:59 AM

    Pros: Great price. Good pivot range. Can pivot either direction

    Cons: could stand a better variety of screws. Had to get my own and I just had 1/4-20 needs.

    Worked great for what I needed. It is almost all plastic, but seems to be holding very well. Nice pivot options. Solid design.

    Was this review helpful to you?

    Does the job

    • Frequent customer,
    •  Henderson, NV 
    • 12/20/2015 6:54:43 AM

    Pros: Price, ease of use

    Cons: Screws (but there is no standard length or size for all the speakers out there).
    Position of the mount to accommodate banana plugs.

    Great value. Used it for Polk TL1 speakers. Went to home depot and got wingnut screw and washer to fit the speaker.
    Only problem is the way it's designed, banana plugs will not fit it. So used he clamp plugs and wrapped one of them with electrical tape so they don't touch each other

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout