Chat Now
Tilt Wall Mount Bracket for LCD LED Plasma (Max 165 lbs, 37 - 70 inch), Extra Wide, Black
In Stock This item should ship today (11/27/2015) if ordered within 13 hours 43 minutes

Tilt Wall Mount Bracket for LCD LED Plasma (Max 165 lbs, 37 - 70 inch), Extra Wide, Black

MONOPRIOCE Wall Mount Logo Locations

Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting Wall Mount Bracket from Monoprice!

This mount bracket has the ability to tilt up to 15 degrees downward, making it ideal for overhead displays in a commercial setting or for keeping the TV out of reach of little hands at home. This bracket has an extra wide wall plate (45"), which spans three studs, allowing an extra mounting point for added security.

This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 100x100 and 1050x450, which includes most 37" to 70" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 165 lbs (including the weight of the mount itself). Mounting hardware is included.

* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.

Support Files:

Model # 6663
Type Tilting
Minimum VESA 100 x 100
Maximum VESA 1050 x 450
Maximum Weight 165 lbs
Minimum Display Size 37"
Maximum Display Size 70"
Minimum Extension 4.0"
Maximum Extension N/A
Tilt Range +0/-15 degrees
Swivel Range N/A
Construction Steel
Color Black
Wall Plate Dimensions 45.0" x 8.9"
Front Plate Dimensions N/A
Built In Level No
Cable Management No
UL Certified No
RoHS Compliant Yes
Notes: Extra wide wallplate
spans three studs,
No logo on mount


82 Reviews

95.98% of the reviewers recommend this product


Good Quality and simple installation

  • Rab,
  •  Cullman, AL 
  • 11/11/2015 2:06:23 PM

Pros: The wall plate is made of quality material and will support a heavier TV. The plate easily attaches to three standard or non standard studs. The TV mounts span a wide range of TVs and comes with enough hardware to make installation simple.

Cons: The wall plate opening needs to be 1" higher to fit a standard 6" media box.

Mounted an older LCD TV that weighted 85 lbs. , the three stud span wall plate mounted over my media box with the help of a small spacer. The quality of material and easy installation makes this a must have product for large and heavy TVs.

Was this review helpful to you?

sturdy mount

  • Anonymous,
  •  Flushing, NY 
  • 12/30/2014 6:55:04 PM

Pros: Wide enough to cover 3 studs if you're worried about nonstandard stud spacing or want extra support.

Cons: The latches that prevent the TV from lifting off the wall bracket do not stop the TV from sliding side to side (may be a pro for some).

This is a great mount for the price. Couldn't find the right combination of the provided spacers and screws to attach the bracket to my Samsung 55" TV, but a long screw with a short spacer and my own washer did the trick. I attached the bracket to the back of the TV on the lowest possible holes to lower the center of mass. However, the bottom of the TV may touch the wall before fully tilted. In this case you have to raise the TV on the bracket (use holes higher up). It was a simple one person job, but needed two people to lift the 40 pound TV onto the wall bracket.

Space is a little tight in back, but it wasn't too hard to tighten the latch screws. However, the TV is not locked in place and can slide side to side with enough force, but there's no danger of it falling off due to the stops on both ends of the wall bracket. The spacing of studs in my wall were nonstandard, but I was still able to attach to three of them. Because two were metal studs and one was a wood stud, I put an extra lag bolt into the wood stud (which was the center of the three studs), and also 2 extra lag bolts at the bottom of the bracket where there was also a wood stud. Only the top two lag bolts on either side attached to metal studs. A total of 9 lag bolts (7 in wood) should be solid enough.

Was this review helpful to you?

Awesome mount

  • Anonymous,
  •  Cincinnati, OH 
  • 11/4/2014 10:35:09 AM

Pros: Easy to set up, large access holes, good insructions

This mount is BEEFY. Holding up my 60 inch tv with no issues. Instructions are clear and to the point. Plenty of hardware provided for all different kinds of tvs. I used all 6 lag screws and mounted to 3 studs. TV is not going anywhere :)

Was this review helpful to you?
  • Mark Lopez,
  •  Cedar park, TX 
  • 7/15/2014 8:58:14 AM

Pros: Simple install. Clear instructions. Worked great!

Cons: Once installed there is little space to work behind the display

Recommend to connect the display cables prior to mounting the unit on the wall.

Was this review helpful to you?

wall mount brackts

  • John,
  •  Houston, TX 
  • 4/18/2014 7:25:21 AM

Pros: I have purchased over 10 of these wall mounts for 60 and 70 inch TVs. They are great - especially for the price.

Cons: You will likely need to have your own mounting screws. The included ones are extremely heavy duty and would require pre-drilling wood studs.

Great mount! Highly recommend it.

Was this review helpful to you?
Tax and shipping will be calculated at checkout