Volume Pricing (Log In to see Member Pricing)
Universal Screen Cleaner (Large bottle, blister pack) for LCD & Plasmas TV, all iPad®, iPhone®, Galaxy Tab®, and smartp...
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Titan Series Tilt Wall Mount for Extra Large 37 - 70 inch TVs 165 lbs Black UL Certified
Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting Wall Mount Bracket from Monoprice!
This mount bracket has the ability to tilt up to 15 degrees downward, making it ideal for overhead displays in a commercial setting or for keeping the TV out of reach of little hands at home. This bracket is made of extra thick 2.5mm steel, which gives an extra level of stability and security.
This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern between 100x100 and 750x450, which includes most 37" to 70" TVs*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 165 lbs (including the weight of the mount itself). Mounting hardware is included.
* Note that the display screen size is only an approximation. Your TV is compatible with this mount as long as your display has a VESA mounting pattern and weight that fit within the size and weight limits listed above.
|Minimum VESA||100 x 100|
|Maximum VESA||750 x 450|
|Maximum Weight||165 lbs|
|Minimum Display Size||37"|
|Maximum Display Size||70"|
|Tilt Range||+0/-15 degrees|
|Wall Plate Dimensions||32.0" x 8.9"|
|Front Plate Dimensions||N/A|
|Built In Level||No|
Extra thick 2.5mm
No logo on mount
Very pleased with it. Solid built. Not terribly hard to figure out. The hardest part was trying to find the studs even with a stud finder. No tilt issues. My only grip is that I wish shipping wasnt so much. Its twice as much as the cost of the mount but still miles cheaper then any bracket you can find here. Buy it you wont be disappointed!
PROS: an extremely sturdy bracket assembly with top quality mounting hardware. Straightforward instructions & easy to put up on the wall. Simple to use "locking mechanism" ensures the Tv isn't coming off the track. The low price for this bracket assembly is amazing.
CONS: The "Tilt" mechanism is very hard to reach & adjust (at least with my 60" plasma)
The screws on the side are hard to turn and hard to get at. I used a 3/8 rachet and a long extention with a #2 phillips bit on it to get the job done.
PROS: Heavy duty, great price
CONS: Lag bolts are longer than a 2x4 width
My main complaint comes from the lag screws. The lag screws in the parts bag were 5/16 x 3 1/2 - very heavy duty, but I snapped the head off two of them within a few turns of having the mount secured to the wall which was quite frustrating. I eventually used the 1/4 x 3 screws I bought at Home Depot along with some additional heavy duty wall anchors.
In hindsight I made a small mistake when I scoped out the placement of my front speakers, spaced to accomdate my TV, without full considering the width of the mount and stud spacing. The mount is slightly off-center, but I am not too concerned. My advice is to plan out where you want the TV and be sure to carefully pre-drill the holes.
The only reason I did not rate this a 10 is because the tv actually sits about 1 inch too close to the wall. I am using the thick HDMI cable in the wall (#3989) and it barely bends enough along the wall to plug into the tv.