2-Gang Wall Plate for Keystone, 4 Hole - White
    Product # 6831
    2-Gang Wall Plate for Keystone, 4 Hole - White
    Product # 6831
    $0.82
    Color : White
    Quantity:
    In Stock This item should ship today (12/6/2016) if ordered within 9 hours 46 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $0.82
    Qty: 2-9 $0.79
    Qty: 10-19 $0.74
    Qty: 20-49 $0.70
    Qty: 50+ $0.67

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    2-Gang Wall Plate for Keystone, 4 Hole - White

    Wall plate for use in conjunction with gang box and keystones. Use appropriate keystones to create a nicely finished, professionally installed look for Ethernet networks or Home Theater interconnects. Eliminate that cluster of wires and hide them behind a wall.


    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
     
     

    The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.

     
    4.4 / 5.0
    66 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    47
    7
    7
    1
    4
    Works great!
    This worked out great for my installation and looks very neat. The larger keystone connectors fit in this and the larger "footprint" meant a bigger hole, which made it easier to work the wires down the wall from the attic.

    PROS: Fits even large keystone connectors
    It works as it should
    Great Price
    February 28, 2014
    Face plate
    Makes a neater install

    PROS: Great product

    CONS: none
    February 17, 2014
    Fits leviton wall plates - but buy extras
    Like people say, these things are very fragile, and breakable, but thankfully they're extremely cheap, so buy extras. Also remember to drill holes in the wall behind where you screw in the wallplate part.

    I used these with official leviton oversized nylon wallplates and they fit perfectly. I also used my own screws since like people said the included ones are unsuitable for gang boxes.

    Even though I bought double the amount of these I needed I still only paid a fraction of what Home Depot and other stores want for the exact same product. Glad I did as I broke 2 during installation! Once installed however they are solid, so factoring the end result with the cost is why I'm giving this the 4 stars.

    PROS: Cheap
    Fits alternative wallplates (standard sizes)

    CONS: Bad screws
    Fragile
    Too bendy
    January 11, 2016
    4/5
    makes a neater appearance than wires hanging from the wall.

    PROS: just what I wanted, but..

    CONS: the mounting holes to the already installed double AC in-wall box were a different configuration, farther apart up and down. Jury-rigged by using only the top holes.

    This plate had different mounting hole spacing from the 2-Gang Recessed Low Voltage Cable Wall Plate also, which I had previously mounted.
    October 24, 2010
    Good, but....
    Great price and fast delivery

    PROS: Big, wide opening allows all kinds of cables to pass through

    CONS: The "cone" in the back is very large and for deep recessed walls (I have brick on the exterior), the cone restricts the cable passsage
    December 30, 2010
    3/5
    The white paint on the screws comes off very easily when installing the cover. It makes an otherwise clean install look cheap.

    PROS: Good price.

    CONS: Screws
    June 16, 2014
    Incorrect screws
    3/5

    PROS: Generally nice design.

    CONS: The long screws are incorrect thread Type and break when screwed into an electrical box. Major problem! No excuse for this.
    October 17, 2014
    You get what you pay for...
    These outlet covers accomplished what I wanted to do and not much more. If you are used to the tougher nylon ones available at the big box stores these are not that as these are made of a very brittle plastic. Additionally the wall plate barely covered the work box (length and width appear to be about 3/8 inch smaller than a standard wall plate) and it would not sit flush to the wall on initial installation. You can remove the ears on the inner keystone plate to improve the fit to the wall but it still isn't flush. After installing one I bumped into a connected/protruding CAT6 cable connection and the plate broke. I only needed one but bought three because the price was right and I'm glad I had extra as a spares.

    PROS: Price was right
    Serves the function

    CONS: Very brittle plastic
    Barely covers outlet box
    Does not sit flush with wall
    April 5, 2014
    Best of the 2-Gang Plates, but still crappy
    I don't know enough about standard wall plate screw positioning to comment on it other than to say it fit in my particular case, but if it's helpful to anyone I just measured the distance between the two screws as exactly: 3 and 13/16 inches.




    PROS: Has enough room for 4 ethernet ports, side by side or above/below.



    After reading the reviews, I had an accurate picture of the crappy item I was receiving.

    CONS: You need to buy your own 6 wall plate screws, either 1/2 inch or 1 inch, because as others have said, the screws that come with it are not long enough (they're only 1/4 inch). They stick out only a millimeter or two after passing the wall plate and the keystone insert.



    The keystone insert does not sit completely sturdy in the wall plate, it has a minor degree of bend to it when touching it or plugging stuff in.



    No idea why they included wood screws, complete waste, don't try to use them at all or you'll risk damaging the threads on the plate.

    October 25, 2015
    Basic plate, a bit awkward
    first off, the wallplate is cheap. Nothing wrong with that in this instance. The design is slightly awkward in that you first secure the insert pieces to the wallboard. If you are working from a standard double gang box, you will screw each module into the sheetrock. Now, why the screws supplied to do this are not threaded completely (the 1/2" screw, only has threads on the first 1/4" of the screw) doesn't make sense.

    PROS: Cheap. Very inexpensive. Like others have stated, purchase a few extra in case one of them breaks (had not happened to me but could be an issue).

    CONS: Cheap.
    February 16, 2016
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART