Chat Now
Wall Mount Bracket, 1.75 X 19 X 4 (inch) , 1U
In Stock This item should ship today (12/1/2015) if ordered within 1 minute

1.04 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

Wall Mount Bracket, 1.75 X 19 X 4 (inch) , 1U

This Wall Mount Bracket is ideal for situations when you want to mount a single piece of equipment, but don't want use an entire relay rack. This bracket mounts to a wall using standard 16" spaced studs or to a brick/cement wall. This bracket is tapped for 10/32 screws and includes 6 such screws.

Related Categories

11 Reviews

76.36% of the reviewers recommend this product


It works...

  • Anonymous,
  •  Centreville, va 
  • 12/26/2014 7:30:13 AM

Pros: The rivets stayed on
The powder coat is nice
The hinges seem fairly substantial

Cons: It was quite warped when I opened it
It's kinda flimsy

Was this review helpful to you?

Screw holes on hinged area just pop out

  • Chris,
  •  Bainbridge Island, WA 
  • 9/17/2014 8:34:03 PM

Pros: Inexpensive

Cons: Cheap -

The 'threaded rivets' on the hinge side don't appear to have clean threads, if you put any pressure on the screw, screwing it in, it just pops the friction rivet out the back. Out of my order of 3, I managed to get 4 screw holes suck w/ screws, and unable to separate the panel from the bracket. Some part of the screws are especially sharp, and I have some papercut like cuts on my finger from trying to remove the screws after the rivets popped out.. The screws were shipped with the monoprice panels I purchased : 7260 & 7253

by Monoprice Administrator
Hello Chris,

Thank you for your review and truly sorry to hear about the issues experienced with PID 8623. I will be sure to pass this info along to our product team so they can look into the matter further. If you would like, I can help setup an RMA for replacements to see if they will work out better or a return RMA if preferred. If you wanted me to proceed with an RMA, please let me know if you would like to return them or obtain replacements. Apologies again for any inconvenience and hope this helps!

Gabby Villa
Tech Support Associate
Was this review helpful to you?

Screws / Holes are Crap, kinda flimsy too, came shipped all bent up

  • Anthony Kosky,
  •  Columbus, OH 
  • 4/19/2014 8:02:13 AM

Pros: Would be a perfect solution if the screws / holes were a better fit.

Cons: -Screws are just a little bit too big for the holes to successfully secure this to the monoprice front panel I ordered.
- The screws need cleaned up before you can even attempt to put them in, they only go in about 1/4 turn and then they're stuck.

Fix the screws and screw holes, really really flimsy, came shipped all bent up, I had to bend it back in place.

Was this review helpful to you?

An ok Bracket

  • Anonymous,
  •  sherwood park, AB 
  • 4/3/2014 9:47:19 AM

Pros: Hinged on one side to easy access to back of panel

Cons: bolt holes not machine well

Built in nuts for screws were not very well machined, the screws that came with the patch panel(also from mono price) didn't not fit well, only partially went in leaving the pannel kinda loose. Going to drill the nuts out and put in bolts.

Was this review helpful to you?
  • David C.,
  •  Chicopee, MA 
  • 1/31/2014 4:18:02 PM

Pros: Good piece

Cons: none

Sturdy and good looking can't beat the price.

Was this review helpful to you?
Tax and shipping will be calculated at checkout