Cat6 Plug Stranded W/Insert 50U 100pcs/Bag
    Product # 7267
    Cat6 Plug Stranded W/Insert 50U 100pcs/Bag
    Product # 7267
    $7.23
    Quantity:
    In Stock This item should ship tomorrow (7/1/2016) if ordered within 21 hours 57 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $7.23
    Qty: 2-9 $6.94
    Qty: 10-19 $6.63
    Qty: 20-49 $6.32
    Qty: 50+ $6.03

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Cat6 Plug Stranded W/Insert 50U 100pcs/Bag

    RJ45 connectors for Cat6 Stranded cables.
    Cat-6 connectors are made to higher standards that help reduce noise caused by crosstalk and system noise.
    Crimp on RJ45 connectors with inserts for holding wires in place.
    Gold plated contacts
    Clear plastic housing.
    For Stranded wire cables.
    Click the following link for an installation guide:
    http://www.monoprice.com/manual/How%20to%20-%20crimp%20RJ45%20w%20inserts.pdf

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, improvements and physical design changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

    44 Reviews

    62.05% of the reviewers recommend this product

    ADD YOUR REVIEW

    Works great, inserts are awesome, doesn't fail

    • F/G,
    •  Lévis, QC 
    • 6/4/2016 3:49:02 PM

    Pros: Inserts make it so easy to get cable correctly inside the plug, never get a wire crossing with another.
    Full gigabit, cheap price.

    Cons: I must admit the cable jacket stopper is a bit disapointing, but since I don't pull my cables very often I can deal with that.
    The stopper still works decently on cable that are big enough espacially with twisted pair cables having a platstic separator indise, the jacket get stuck inside pretty well but with 24 AWG not twisted without separator, the cable is too small so the two small pins can hold the jacket inside.

    Every single termination and patch cord I have made are working at gigabit speeds as expected.
    Jacket may not be held correctly on every type of cable but still solid enough.
    I personnally take a precision screwdriver to push the insert as deep as possible and to make sure the wires are well placed when you crimp it.

    Was this review helpful to you?

    0 % of failed terminations (So far)

    • R Wood,
    •  Niles, MI 
    • 5/2/2016 7:25:56 AM

    Pros: High confidence that your termination wiring is good the 1st time

    Cons: solid wire & stranded wire is not clearly marked on parts.

    I rate this type of product by the amount of reject or construction failures of the termination product, which causes reworks and cable waste. Plus there is a high degree of confidence that termination wiring is good THE 1ST TIME!

    Was this review helpful to you?

    Didn't work

    • Gopi Manne,
    •  Parker, CO 
    • 3/22/2016 5:48:14 AM

    I make couple of cables and both failed. Of the 4 connections, only one made actual connection. I replaced them with cat 5e plugs and they started working. Please avoid these.

    Was this review helpful to you?

    Works great on 24 AWG but not on 23 AWG

    • Anonymous,
    •  gatineau, quebec 
    • 3/11/2016 12:34:25 PM

    Pros: Great on 24 AWG. Worked every time

    Cons: Terrible on 23 AWG. Couldn't get it to work after 8 tries.

    I bought these at the same time as I got some 23 AWG cat 6 tygerwire cable. I tried about 8 times to attach them but each time there was a problem with the connector pins connecting with the cable wires. When looking at the connector up close you could even see the pins were crooked and didn't have good contact with the wires .

    I then tried some 24 AWG cat 6 cable I had and it worked perfectly the first time. Proceeded to do about 20 connectors without a problem.

    Was this review helpful to you?

    Love 'em!

    • Mike,
    •  Denver, CO 
    • 3/11/2016 11:21:16 AM

    Pros: Easy to use, nearly fool-proof

    Cons: can put the insert on upside down if not paying attention...

    The inserts make it virtually impossible to mess up. Get all the strands in the right order, slide insert over wires, place wires w/insert in place into plug & crimp. Have had only one bad out the 50 or so I did this past week & it looks like user error (Mine).

    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART