RJ-12 110 Type 90 Keystone Jack - White
    Product # 7296
    RJ-12 110 Type 90 Keystone Jack - White
    Product # 7296
    $0.81
    Color : White
    Quantity:
    In Stock This item should ship today (12/7/2016) if ordered within 11 hours 27 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $0.81
    Qty: 2-9 $0.74
    Qty: 10-19 $0.67
    Qty: 20-49 $0.61
    Qty: 50+ $0.54

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    RJ-12 110 Type 90 Keystone Jack - White

    Easy to use, modular RJ11/RJ12 Keystone jack. 110 type IDC. 90 degree connection. To be used with keystone wall plate or panel. Wiring diagram next to wire clips.

    Note that the width of the RJ11/12 keystones is such that two cannot be used side-by-side in the same wall-plate.

    *Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.
     
    *The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.

     
    3.8 / 5.0
    34 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    18
    3
    5
    3
    5
    5/5
    wouldnt buy again

    PROS: the jack worked.

    CONS: too bulky.I would love to buy this type of jack ,but the problem is when i try to fit multiple jacks of this type in lets say a 4 hole face plate its a super tight fit
    August 5, 2012
    Great for the price...but
    They seem to work great. But I found that if you try to use a two outlet plate from another manufacturer with the holes vertically, they don't fit correctly due to the size of the backside where the punch down terminals are. The height of the terminal block is just a few millimeters too tall and will not let the jack above fit correctly in the slot. I found this out when someone stepped on the Monoprice plate and broke it. So I could finish the project, I had to purchase another one and found this out. Otherwise ok. Again, this is with another manufacturers plate. It is not all standard as I thought. No problem. Just a glitch. Otherwise great.

    PROS: Price

    CONS: Cannot be used with plates from another manufacturer. The back side of the jack is quite bigger than normal.
    October 27, 2014
    No-brainer as long as you're not color-blind
    These are clearly labeled and easy to use. I was using cat6e and only had one out of 25 give me any grief(probably due to the wire gage more than anything). All tested good when done.

    PROS: Out of the 25 I used on one job, I only had one that gave me any trouble(and that may be due to the thickness of the cat6e that was used). I tested after the install and had zero failures from the punchdown.
    Cost over what the local hardware store has is a winner!

    CONS: These only really work well in a vertical trim plate. Too big to fit side-by-side in a 4/6 port trim plate. Could not use the Labor Saver punch down "Puck", so it'll be a bit rough on the hands if you are doing a bunch.
    April 24, 2012
    5/5
    5/5

    PROS: ALL THE ITEMS WERE GREAT, BOUGHT A LOT OF KEYSTONE JACKS AND PLATES, EXCELLENT QUALITY. VERY HAPPY
    July 8, 2013
    Cant beat the price
    I have punched these down all over my house and they all tested well. No complaints.

    PROS: Price and the fact that it works exactly as it should

    CONS: None would definitely recommend
    October 31, 2013
    5/5
    5/5

    PROS: SUPER GOOD QUALITY AS DESCRIBED
    November 19, 2012
    Terrible Item
    This jack made my cabling job a nightmare. I had to run 99 cable drops. I wasted so much time trying to punch the wires down ever so carefully so they don't bunch up. You can't just simply punch the wire down onto this jack. You have to carefully make the wire very straight and punch it just right, not too fast not too slow. Many times, the wire just bunches up and does not punch, then you have to cut that part off and try again repeatedly until the wire finally punches onto the jack. This really cost me lots of time and made my cabling job a nightmare. Never again will I order these. (I am very surprised, I purchase lots of things from monoprice, and this is my first time having an issue with an item)

    PROS: No Pros. Terrible Item

    CONS: Very difficult to punch down wires. Takes many tries to punch.
    December 22, 2013
    Great Products at great prices
    Great Products at great prices
    April 30, 2012
    5/5
    great rpice
    November 28, 2011
    Good
    For those running just 1 pair of wires, use the 2 posts furthest from the port.



    The caps falling off is a very minor detail, just make sure they stay on long enough to get the plate screwed into the wall and you don't have to worry about it again.

    PROS: Works.

    CONS: The caps that slide over the punched down wires tend to fall off fairly easily.
    August 26, 2013
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART